CAM and Follower Problem | Radial Flat-Faced Follower | How to Draw CAM Profile | CAM Profile |

Detailed introduction of CAM & Follower
• CAM & Follower Mechani...
How to Draw the displacement diagram for different follower motion
• displacement diagram f...
How to Draw Cam Profile
• Cam Profile, profile, ...
CAM & Follower | 1st Problem | Radial Knife-edge Follower |
• CAM and Follower Probl...
CAM & Follower | 2nd Problem | Off-set Knife-edge Follower |
• CAM and Follower Probl...
CAM & Follower | 3rd Problem | Radial Roller Follower |
• CAM and Follower Probl...
CAM & Follower | 4th Problem | Off-set Roller Follower |
• CAM and Follower Probl...
CAM & Follower | 5th Problem | Radial Flat-Faced Follower | & Follower | 1st Problem | Radial Knife-edge Follower |
• CAM and Follower Probl...
CAM & Follower | 2nd Problem | Off-set Knife-edge Follower |
• CAM and Follower Probl...
CAM & Follower | 3rd Problem | Radial Roller Follower |
• CAM and Follower Probl...
CAM & Follower | 4th Problem | Off-set Roller Follower |
• CAM and Follower Probl...
CAM & Follower | 5th Problem | Radial Flat-Faced Follower |
• CAM and Follower Probl...

[@abhishekkushwaha9879]

It is good to divide both thita o and thita r in equal parts or both different

[@venkatahegde4412]

Good video. Please make more videos like this

[@harshvlogs7246]

Nice video sir,very helpful

[@DipeshMalvade]

What exact formula to draw small circle in follower displacement diagram

[@pravinkumar07]

The circumference (2 pie r) of that circle is equal to h (max displacement)
So, the radius (r) of that circle is equal to
h/2 × pie

[@karthikteja504]

thanks bro

[@Kevin-gz7th]

Is there a method to draw the smooth curve or its just freehand?

[@pravinkumar07]

For drawing of smooth curve on notebook you can use either French curve or just free hand sketch....for digital platform use spline ....

[@chrisjobes7749]

If you want to use a computer to do the drawing, you can find the cam profile coordinate equations that have been derived using calculus and envelopes (inner and outer) in Wilson and Sadler's book "Kinematics and Dynamics of Machinery". Otherwise, a french curve tangent to as many flat faces as possible is the best choice. During dwells, of course, you can use a compass.