In no world does the 24v Busso sound bad (I've owned one for 6 years and may it live forever) but somehow the 12v ones sound even better. The engine note is clearer in the 12v engines whereas it becomes a slight drone on the later ones. Alas the earlier engines are almost non existent now, I think I've only ever seen one in recent times; was a SZ parked up at the garage I take my car to...
Remember these coming out. And Eon de Vos giving motivational talk at work. He drove in in one of these. Was chatting in the bat afterwards.... He said it was an animal. Good work!
Beautiful ❤ So awesome to see Alfas appreciated like this! No matter their flaws... And flaws they have.. If anything it makes Alfisti love them even MORE! What other car can boast this? There is none. They have a certain magic all other brands just don't. Plain and simple.
Its Friday the 13th which is my lucky day and i got to give the 45th like which is my favourite number on a video about my favourite car. I think I'm going to have a really good week.
Really! Mine only needed to look at rain to show rust stains. Perhaps the strong sun on the white paint? Had to respray it. Also, my car at least had zero under seal, so totally inappropriate for any climate which included rain or salt
@@hugogreen4916 As far as I know the ZA GTV's also got the Zinc Galvanisation which featured on the later 164 - this too also was experimental, but makes them near-immortal.
I had to come and see a video on this car having just watched a CZcams video where Jeremy Clarkson was asked what car he regrets selling the most, his answer was this one: Alfa Romeo GTV6
Nice to see. Would be interested to know where he got his remainder stats - 42 from. As an owner of one of the 212. I recognize the issue of modify versus retaining originality. My experience led me to implement practical modifications over the years. The suspension was out of sorts with the low profile tyres- solution stiffer torsion bars and rear springs , plus proper bushings ( not rubber). With carbs the car drank petrol and except when warm proved slow to start- like kicking a slumbering bull, snorts, rumbles, stutters, roars, back fires until after a few minutes it would settle down . By which time half the street had been woken up. The gearing was way to short. 21.6 miles per 1000 rpm and required shifting twice before 60. Inside the car, driver footwell space restricted heeling and toeing because of a piece of carpet covered plastic mounding . Behind the wheel the steering column ( relative to a 2.5 liter gtv 6 ) was all wrong. Column needed to be dropped and extended. And then the brakes- not up to the increased power of the car. So what to do? Touches I do like. The glass Fibre bonnet- but why isn’t the naca duct open? The custom sump guard . The custom front spoiler , the larger radiator and oil cooler. And the air con. Minor gripes, the all black interior - including headlining. The total absence of underbody protection- just body paint... Still it’s nice to have one..
You know it's a truly faithful restoration of an Afla, when you immediately see the poor fit of the bumpers. Both front and rear are crooked. 😄 Weirdly, the final edit of the video even includes a zoomed-in shot of the most bent section...! 🤦🏼♂️
I would never stop to look at that beautiful de dion rear bridge, with watt leverages, transaxle gearbox and disk brakes on the half drive shafts... What a pity they are under the car and not visible!!
Hey Guys! Great video! We have an homage to the Danny Snobek Marlboro GTV6 on our channel! And we just finished filming again with them this past weekend and have a couple of more in depth videos coming on the car! Would love to get your thoughts!
Před 2 lety
Hi Basie, I'm Pablo, from Argentina, I'm looking for an V6 engine to add at an Alfetta GTV. Please, if do you know something about it, please let me know, regards
Six single choke delorto’s . Phenomenal torque. Drank fuel like crazy. Hard to tune. I changed over to fuel injection. The engine and carbs had their origins in the alfa 6. Apparently the heads were special to the SA 3 liter , which also had a larger radiator ( than the 2.5 injection) and an oil cooler ( not present on the 2.5 liter injection
In my opinion the Alfetta and its descendants were too softly sprung until the last couple of years' production of the 75s from '89 on. Simply fitting Bilstein dampers helps because of their high pressure. The best way to go is to bite the bullet and fit stiffer torsion bars and springs, but just lower, stiffer rear coils and a big front anti-roll bar is a cost-saving way to go. It is important to replace the rubber bushing at the front apex of the deDion triangle with a metal unibal. That will eliminate the sort of eccentric rear anti-roll bar effect as rubber compresses. This can cause a quick spin on turn-in under hard braking. That only happened to me once in 4 to 500,000 miles of driving Alfetta-types, but you see this happen in club race videos sometimes. The forward caster bushing and inner bushing of the upper wishbone can be directly replaced by metal ones from the 105 Alfa Spider, GTV, Berlina. A limited slip diff is very worthwhile to maximize the already excellent traction provided by the transaxle's location; very low just ahead of the rear axle. US spec Alfettas have incredibly (nearly 100 lbs each) heavy 5mph bumpers. Getting rid of them improves every aspect of performance, especially handling.
Truly a car full of soul.
Only Alfa Romeo owners could truly understand this.
Not perfect, but beautiful in it's imperfections.
...and some of its imperfections make🙂 it more beautiful? What do you think?
@@paolo1566 100%
That’s an absolute beauty of a GTV6! A total credit to the restoration team!!!
Thanks for this restoration. GTV is one of the best of my Italy... great car !
Alfa Romeo's 3 liter V6 is definitely one of the best sounding engines in the world , eargasms all day
I found the Alfa Romeo 2.5 liter V6 12v to be the best sounding 6 cilinder ever mass produced, I owned both the 2.5 and the 3.0, both 12 valves.
In no world does the 24v Busso sound bad (I've owned one for 6 years and may it live forever) but somehow the 12v ones sound even better. The engine note is clearer in the 12v engines whereas it becomes a slight drone on the later ones. Alas the earlier engines are almost non existent now, I think I've only ever seen one in recent times; was a SZ parked up at the garage I take my car to...
Awesome!! Nothing like a GTV6 coming screaming past you on the road!! Just love them!!
Wow! Awesome work guys. Beautiful work. Alfisti salute from Sydney, Oz.
From the land of OZ?
Well we love them. Skills, Love and attention to detail like I've never seen before. 100%
My love this car will never end.
Great job! She is Wonderful! Bellissima Alfa. Many compliments. 👏👏👏
Remember these coming out. And Eon de Vos giving motivational talk at work. He drove in in one of these. Was chatting in the bat afterwards.... He said it was an animal.
Good work!
Beautiful video about a beautiful car
Excellent camera work man love to see every mechanical details. Drove one way back in the eighties
Beautiful ❤
So awesome to see Alfas appreciated like this!
No matter their flaws... And flaws they have.. If anything it makes Alfisti love them even MORE!
What other car can boast this?
There is none.
They have a certain magic all other brands just don't.
Plain and simple.
Can you name one flaw?
BRAVISSIMI! Che bel lavoro pulito
Restauro eccezionale! Complimenti!
Beautiful work! Stunning car!
Complimenti per la passione che avete avuto nel restaurare un marchio leggendario come ľ Alfa Romeo.
OMG it's full of stars!
Absolutely beautiful and perfect restoration! One dislike is a poes!
Excellent job. Congratulations.
Wow what a beautiful car thanks cars.co.za
The Queen is back
Great job. You restored the great peace of the history.
Complimenti un vero restauro da professionisti..alfa romeo meraviglioso marchio..
Incredible
Its Friday the 13th which is my lucky day and i got to give the 45th like which is my favourite number on a video about my favourite car. I think I'm going to have a really good week.
Last of the V 6 busso designed engines. An absolute wet dream when revved hard.
Thank You
Very sweet car. congratulations on such nice work.
Solo la passione può continuare a dare vita ad un mito
And its South African carbon steel - which means they do not rust ! Deeply in love with GTV's ....
Really!
Mine only needed to look at rain to show rust stains. Perhaps the strong sun on the white paint? Had to respray it.
Also, my car at least had zero under seal, so totally inappropriate for any climate which included rain or salt
@@hugogreen4916 As far as I know the ZA GTV's also got the Zinc Galvanisation which featured on the later 164 - this too also was experimental, but makes them near-immortal.
@@martinlagrange8821 not sure about that Martin. Though mine does have very little tin worm.
Largely due to low usage and dry summers
Looking forward to seeing the 325is evo 1 and evo 2 restoration video😎🇿🇦
Very nice job!
Vauuu beautiful cars,Alfa the best cars ever!!
What a great video. Nice work guys. Do you need a Tacho without a bent needle?
I had to come and see a video on this car having just watched a CZcams video where Jeremy Clarkson was asked what car he regrets selling the most, his answer was this one: Alfa Romeo GTV6
This is one car that i always liked better then the E30 325is
Nice to see. Would be interested to know where he got his remainder stats - 42 from.
As an owner of one of the 212. I recognize the issue of modify versus retaining originality. My experience led me to implement practical modifications over the years. The suspension was out of sorts with the low profile tyres- solution stiffer torsion bars and rear springs , plus proper bushings ( not rubber).
With carbs the car drank petrol and except when warm proved slow to start- like kicking a slumbering bull, snorts, rumbles, stutters, roars, back fires until after a few minutes it would settle down . By which time half the street had been woken up.
The gearing was way to short. 21.6 miles per 1000 rpm and required shifting twice before 60.
Inside the car, driver footwell space restricted heeling and toeing because of a piece of carpet covered plastic mounding .
Behind the wheel the steering column ( relative to a 2.5 liter gtv 6 ) was all wrong. Column needed to be dropped and extended.
And then the brakes- not up to the increased power of the car.
So what to do?
Touches I do like. The glass Fibre bonnet- but why isn’t the naca duct open? The custom sump guard . The custom front spoiler , the larger radiator and oil cooler. And the air con.
Minor gripes, the all black interior - including headlining. The total absence of underbody protection- just body paint...
Still it’s nice to have one..
You know it's a truly faithful restoration of an Afla, when you immediately see the poor fit of the bumpers. Both front and rear are crooked. 😄 Weirdly, the final edit of the video even includes a zoomed-in shot of the most bent section...! 🤦🏼♂️
Absolutely stunning, Bellissimo ♥🇮🇹🍀🇿🇦
Nice one
I would never stop to look at that beautiful de dion rear bridge, with watt leverages, transaxle gearbox and disk brakes on the half drive shafts... What a pity they are under the car and not visible!!
Awsome gtv6, please fix the bent needle on the rev counter then i can call that alfa perfect
Lovely! I have one, so I know.
Naais manne, sou net soo graag die enjin wou hoor.
3.0 / 4.0 / 5.0 ... whatever, we NEVER see and hear these things truly DRIVE in videos.
Music a bit loud ruined the sound of the beautiful V6 Busso!
Look up the Aussie Giocattolo. lovely vid though guys.
I had a model car that I got for my 10th birthday. Sadly stolen on my birthday . My favourite Alfa
So cool and so nice!!!!!
I love my gtv6
Hey Guys! Great video! We have an homage to the Danny Snobek Marlboro GTV6 on our channel! And we just finished filming again with them this past weekend and have a couple of more in depth videos coming on the car! Would love to get your thoughts!
Hi Basie, I'm Pablo, from Argentina, I'm looking for an V6 engine to add at an Alfetta GTV. Please, if do you know something about it, please let me know, regards
Salve ma è un Busso anche questo 3000?
What I'm interested in is how much the restoration costed. I might want to do this too so...
Hello, where did you buy the car parts?
Bravo!!!
complimenti...fa tastica
Звук этого двигателя сводит меня сумма!!!!!
I need the measures of the headliner. Can someone help me please? I make covers
Альфа Ромео это колесница БОГОВ
Where is his workshop based
quanto costa restaurare un gtv 6 cosi?
Carburetors? Correct me if I'm wrong, only the south african version used them, because as far as I know, the 3.0L engine is fuel injected
Six single choke delorto’s . Phenomenal torque. Drank fuel like crazy. Hard to tune. I changed over to fuel injection. The engine and carbs had their origins in the alfa 6. Apparently the heads were special to the SA 3 liter , which also had a larger radiator ( than the 2.5 injection) and an oil cooler ( not present on the 2.5 liter injection
Piet de jager se kar daai?
Wet n voorreg !! Die meesters !!
The design is so contemporary! Look at all the sedans that are now going hatchback which was influenced by the Tesla.
No, that's been for ages. It was done *before* the GTV was released.
is there any English translation available?
All good except parts are easily available
Salut my friend super car super video subscribe subscribe...
In my opinion the Alfetta and its descendants were too softly sprung until the last couple of years' production of the 75s from '89 on. Simply fitting Bilstein dampers helps because of their high pressure. The best way to go is to bite the bullet and fit stiffer torsion bars and springs, but just lower, stiffer rear coils and a big front anti-roll bar is a cost-saving way to go. It is important to replace the rubber bushing at the front apex of the deDion triangle with a metal unibal. That will eliminate the sort of eccentric rear anti-roll bar effect as rubber compresses. This can cause a quick spin on turn-in under hard braking. That only happened to me once in 4 to 500,000 miles of driving Alfetta-types, but you see this happen in club race videos sometimes. The forward caster bushing and inner bushing of the upper wishbone can be directly replaced by metal ones from the 105 Alfa Spider, GTV, Berlina. A limited slip diff is very worthwhile to maximize the already excellent traction provided by the transaxle's location; very low just ahead of the rear axle. US spec Alfettas have incredibly (nearly 100 lbs each) heavy 5mph bumpers. Getting rid of them improves every aspect of performance, especially handling.
Old fools still don't get it. Stance is everything.
It would look WAY better if it was lowered 2 inches
FFS
(lowering also improves performance)
😍😍😍😍😍😍🍀🍀🍀🍀🍀🍀
Let's ruin one of the best engine intake sounds with obnoxious music!
if you start the engine of an Alfa Romeo its very disrespectful to keep the annoying music going ,.. we want to hear the Italian angel sing .
English?
Beautiful car.. fukin ugly wheels.
Narrator needs to work on his dicton. Horrible voice