Thank you! I fixed it in my 2014 Corolla after just leaving it messed up for years. Ty for putting no BS in the title so I knew it would be quick and to the point!
Thanks for this! The Jiffy Lube technician which replaced my cabin filter apparently didn’t connect the damper. I tried to connect it at that tricky end where you had problems, and I could just not get the boy part of glove box frame to snap into the damper. After several cursing episodes I just gave up.
It's a pain to get it out. Today was first time replacing cabin filters myself on both Subaru, and it happened in both. Was able to fish it out with me fingers and the glove box completely removed.
Attach damper to the lower hole up towards the dash connector my 2013 did the same thing when I used the upper damper hole and the damper kept popping off when closing the glove box and forced me to fish it out of the panel till I realized to try the lower hole on the damper..
Thank you! I fixed it in my 2014 Corolla after just leaving it messed up for years. Ty for putting no BS in the title so I knew it would be quick and to the point!
Thanks for this! The Jiffy Lube technician which replaced my cabin filter apparently didn’t connect the damper. I tried to connect it at that tricky end where you had problems, and I could just not get the boy part of glove box frame to snap into the damper. After several cursing episodes I just gave up.
Muchas Gracias pude resolver mi problema no tuve necesidad de traducir nada
Thank you
Thanks I was getting pissed because I took it out and couldn’t hook a little black thing back up.
There wasn't any bs. Thank you
Thank you bud ... really help me ... I tought I lost the spring . And I felt like a dead man cus is my wife's car lol
Anyone have any tips on what to do if the little piece that connects to damper is broken..?
Hi Dude ! Thanks for ours explications, pratice and clever😊
Thank you so much excellent video.
Thank you very much I could not find the hook where the hole on dampener attached thanks again
Legend💪
Thank you!!!!
thank you soooo much !
No BS indeed. Worked on my 2019 version
Its the same as Mazda MX 30 from 2020
OMG THANK U!
Easier to use the Phillips screwdriver to pull damper to the glovebox pin
What happens if damper falls inside??
It's a pain to get it out. Today was first time replacing cabin filters myself on both Subaru, and it happened in both. Was able to fish it out with me fingers and the glove box completely removed.
I did all of this, yet the damper pops off each time...even though I hear it snap on the clips
Attach damper to the lower hole up towards the dash connector my 2013 did the same thing when I used the upper damper hole and the damper kept popping off when closing the glove box and forced me to fish it out of the panel till I realized to try the lower hole on the damper..
Thank you