F150 Conversion to a 2014
Vložit
- čas přidán 5. 09. 2024
- I am converting a 2005 F154 door short bed 4 wheel drive to a 2014 front in and rear and let me know if you guys have any questions will be posting more videos on this build
Add me on Instagram / 702_ford_life
Follow me on snapchat. diesellivin702
Email me 702diesellivin@gmail.com
I’m glad you mentioned that cutting was involved. I wouldn’t have figured that out until it was too late
Doing this conversion now. Literally took 5 minutes to cut both sides and the slots should be about 15 to 20 minutes for the lights. An angle grinder will knock it out and Home Depot rents them cheap also Harbor Freight if you have them in your area. Also the ultimate easy way out borrow one from a friend. My 08 is outdated and needs an engine overhaul or replacement so it's worth it in my scenario.
The gas cap interfered with the fuel door because the 2014 doesn't use a gas cap at all.
I like the cap less configuration better.
@@residentevil2928 Least till ou get water in your fuel. Ive gone through deep water in many vehicles. Of course gutted. Gas caps are best
I tried to add fuel to my 2010 the other day because I had a gas can with some in it, and it wouldn’t even open the hole. Needless to say, gas caps for the win. What’s gonna happen if you run out of gas and try to use a gas can?
Kr Davey they come with a funnel for that exact reason. If you bought it used and it didn’t come with one I’m sure eBay or amazon will help you out
@@GI-rt7ol Ibe never seen a gas can or vehicle come with a funnel for such reasons. If anything, its the annoying safty switch bullsgit that causes more fuel to be spilled than into the tank. To which is why i drill out the nosel of the new gas cans...
Thank you sir, some badass rigs, glad to see someone has finished this and did it right, starting to swap my 06 this summer
Brien Mussehl Thanks a lot man if you have any questions just let me know. Shoot me an email with any questions
You can hear the disappointment that he lost the argument with his wife on how he was going to build the truck.
It’s more of an excuse for not having money to finish an actual build. Putting in an uglier barely newer front end is no build
this dude needs a job with chip foose or west coast customs, or some SEMA builder. quality of workmanship is insane
Thanks man I appreciate the complement
Thanks man I appreciate it. I made it in to sema 2019 it was a great experience I built a new diesel for it. Check it out it's on my channel
That core support is magnesium f150 250 350 from 04 to present day. Made Eaton rapids mi.
Believe it or not that's core support is called mrs then there was 415 till 2013 14+ is the 552. We sell 17k a week only f150
that's a very interesting video, but you already had a very good looking one to begin with, imo
Love to have this guy and his car lot as a neighbor
youre damn right i love having a car lot
Gotta love Ford with their menial changes every few model years. Lol
Happens with everything, all brands change body styling every 4-5 years
You should've gotten raptor fenders and grille
Nah only real raptors can have them
@@tacoengineer6660 false
Nah thats some ricer shit and looks retarded on non raptor models
@@woodencoins808 It's not false, because that's ricer!!
those are so overplayed now
Both top and bottom are brake and turn on the new lights.
Ford doesn't use separate turn/brake lights on those tail lights. Both bulbs are the brake/turn signals like my 2013
Damn so if someone wanted to they could buy a crashed f150 and just put newer parts on it. That’s crazy
How do you think small mom and pops dealers get their cars?
Just ran into the rear axle swap issue with the discontinued FL3Z-4010-C rear end that came in my 2007. had to end up looking for the e-locked 8.8 out of a 2015 turbo model. Shock mount spacing was identical and the spring perches are non welded to the tubes. Not a single salvage yard in 3 states had a single 99 or newer 150. Was a bit of a pain in the ass.
nice job.....i will be considering doing this to my 05 FX4 👍🏻🔧🔩🛠
You should have done a raptor conversion. That way you keep with the wide body off road look you did on the old body.
Can't swap the front doors though lol the 10 up body is nearly 8inches larger than the 04 to 07 and once you notice it they look tiny so you can't do a complete swap with door panels unless it's extened cab those didn't change size
Gas cap is hitting because the ‘14 has a cap less system. You could get a filler neck out of a ‘13 or ‘14 and you’d be good to go.
Great job I’m going to be doing this alao
On the tail light the hole light is the turn signal
Looks like a lot less work than I would have thought looks good
I like !
This is dope bro. Nice job
I have a 04 4wd expedition, since about 010 I've been wanting to lift it and put some of the newer F150 front clip on it.
I'm seeing some difference around the A pillar first off
And put a solid rear axle.
This looks like the 29 palms military housing
Cool project!
This is a great video man! Im getting a 05 F150 then I want to do the gen 1 raptor conversion with the fiberwerx front kit. Did you have to modify anything on the new bed? I think it might be easier to get a new style one then to try messing with the original haha.
Hey Raymond, did you have any luck with getting the 05 and doing this conversion? If so do you mind sharing details? Doing this now on an 08. Thanks!
Get a capless gas filler, cool job.
I need more detail on the front fender to headlight brackets! Thank you for your service!
Hey Andy, did you get this figured out yet? I'm doing the conversion on mine now have an 08. Thanks!
Good information brother thanks
Could you also use the raptor fenders and bed for this conversion I believe the 2010 raptor is built up from the 05-09 body. I'm planning on doing this conversion but if I can use the raptor style then I'll go for it as I love the look of them.
also, ur really experienced man, how do u feel about the safety of running spacers?
Dont really like it but the truck is light and we didnt tow with it and I went with a good brand. I never had a issue with it
They need one for the current gen style
Did i hear u say 2014 conversion with long travel? The wife would love it 😂
For that reason I’m not getting married 😂
It was a pretty nice truck to begin with..
Hey everyone. I just posted part 2 of the f150 conversion go check it out.
I was looking for it at the description so must people will do the same. So it will be a good idea to add the link in the description of this video. Well done
I am going to use the 09 to 14 radiator core support with mine Do u know if this will work.Thanks
Sweet was hoping there was a part two, very cool concept bud.
keeping up with the Jones'
Nice,cool
Shout out from nlv man.
Cool! Nice work!
Nice conversion
Awesome 😀 😀 2014 Ford F-150 review .
nice job
That’s badass! Is the 2010 bed the same as a 2014? And what size bed would fit a 2008 extended cab?
Chepo Aguirre if your asking these questions then you need to find a shop to do the work for you buddy. It’s not a hard conversion at all but you do need a little bit of common sense about trucks and have basic mechanical ability or your gonna fuc yourself up real good and then you’ll get frustrated and sell it on Craigslist to some kid that doesn’t know any better and you’ll end up fucn him and it just ain’t right, seen it happen a hundred times man
The cab size doesn't matter... The beds to my knowledge from 04-14 come in 5.5ft, 6.5ft and 7ft lengths I believe... you can't take a 5.5ft bed off a 2014 and put it on a 2004 that originally had a 6.5ft or 7ft bed. It wouldn't work.
I wish I saw this earlier I would have definitely bought those fenders
Ive thought about swapping the 2015 fenders on an 05
WARD5KUSTOMZ not sure if you can do a 15 on this body. Dont think the lines match up
WARD5KUSTOMZ if you do it pls share I'd love to see it
Do a 10 speed and gen 3 5.0 swap of a 2018 f150
Both of the tail lights are turn and stop
I’m wanting to do even newer. 2015-2016 front and rear congestion to my 2007. Trying to find info on it with no luck. Anyone reading this know if it’ll swap over or so I need to pull out the sawzall and mug welder?
How u mount the bumper to the 05 frame? What modifications u had to do?
2011 up ditched gas caps.
Good work
Anybody know if you can put the 09-14 model bed on the 97-03 generation?
I'm sure it mite bolt up but its going to look off nothing would match the cab
Will this conversation work on a 2005 Ford F-150?
Great video
Nice work
Hey dope video i have a question what's the name of the fenders on the bed and front of the truck
McNeil racing
I wonder if you the bumper of 2004 fit on 2010 I like the big fog lights
Hey not sure if your responding 3 years later 😂. What size grade a bolts did you use? Working on this conversion now thanks so much for posting this video!
Never seen a chin strap for a ball cap....interesting appearance.
Sucks you didnt prerunner it. But still awsome conversion! The prerunner bed still available?
Mario I have the bed sides and front fenders
Hey man i need some info. How hard would it be to get the dash/body harness/ climate controls and everything from 12th gen f150 into and 11th gen 07 4.6 rwd supercab. I want the sat nav unit from kayhan and they only have them for the 12th gen and i want to keep my truck like you its paid off and runs strong just want digital climate and all other options with 12th gen dash. Sorry for the long post but what really appreciate if you or anyone else on the comments could help me out and thank you ahead of time.
How much did you spend for the entire kit?
Sick
I'm waiting for someone to do a 15-20 conversion on an 09-14. Any idea if anyone has done it and took videos or picture like you?
That'll be interesting when you go to sell it.
Sold no problem had around 5k including the truck and sold for 13k so made money on it
Did you just buy 2014 parts and put them on or did you get a conversion kit?
No conversion kit most of it bolts on
How did you install the bumper? If I left the top bumper insert on my 2007 alone could I fab up something to replace the chrome bumper underneath with a 2009-2014?
Did you trim the stock mounting plates from the older en or did you buy on a from the new gen and fab those on?
I used the whole piece the plastic and the metal bumper off of a 2014 don't think you can use the old plastic I used the same bumper mounts off of the 05 and made extended brackets with longer bolts to hold it in place
The ears the hat the beard
How did the conversion cost total
pbcsmom28 check out part 2 I spent around 600 on parts
Question is it possible to convert the fenders cab and bed of a2004 F150 to a 2015?
No I think the body is way different
Do you have a finished video????
look for part 2 in my videos
Can you steady the camera a bit please? I'm getting dizzy
Can a 2015 f150 front end go on a 2013
The 2014 doesnt have a gas cap u just open and pump
hello i have a question the fenders from the 09 it was from another 4 dr or it wont matter if is 2 door
Daniel Villanueva don't think it matters I got them from a extended cab
702 diesellivin ohhh nice so u dint change the radiador support u use the same
Daniel Villanueva I didn't change it used the stock one
Where do I buy the "widebody" fenders
McNeil racing sell the kids i sold everything awhile ago
What was the cost for all of this
Do you still have the prerunner fenders and looking to sell?
What’s wheel and tire set up
Any one knows if the seats fit bolt on? Or need a special brackets?
Where the original 05 head lights factory
Or do you have any left over 04-08 parts for sale?
You just saved 30 grand
Hahaha.. so very true I was just checking out the prices this week.
Have the diesel brothers/sparks motors do this for you. That is if u live in Texas (or whatever state sparks motors is in).
White trippie red
What wheels are those?
Nice do you have the 2nd part video
ipchilo yes will be posting one in a few days
702 diesellivin i will be waiting for the video i want to do the conversion to my 2004 very good explaining thanks
Did you haft to change your radiator core support?
No some people do to provide a mount for the lights. Part of the light goes into the fender and then there's 2 tabs. This guy however simply made brackets that serves the same purpose. Way less money.
@@quickvance6276 thank you for the information.
1:27 "THA FUCK?!?!?"
Fenders still for sale by chance?
Jacob Thompson the front ones are
How much for the front end parts?
udunome I got a deal i.found the whole front clip in California for 400 bucks
How much would charge to do the conversion for someone
pbcsmom28 it just depends on how.l cheap you can get the parts
702 diesellivin what state are you located in and is there a better way to communicate with you?
Did the 09 hood hinges solve the problem?
Yea use the newer hinges.
Check out the updated video of the build.
What lift you got?
Wow you turned the sexiest Ford truck ever made, into the second ugliest one. But I will give you props for a job well done. I'd rather convert my 05 to a 5.0 coyote with a 10 speed.
Can i pay you to do my conversion?
Kyle is that you
What year is the truck .?
Funny but these trucks no longer use gas caps...........
True that