NEW Laser TV - How To Set Up - Epson LS800 4K UST Projector
Vložit
- čas přidán 8. 09. 2024
- Dreamedia / 877-417-9000 / Sales@dreaMediaAV.com / www.dreamediaav.com
Follow along as Zak sets up the the NEW Epson Epic Vision LS800 4K UST (ultra short throw) projector in the cabinet from Salamander Designs and guides you all the way through the setup and install process! This cabinet featured is the Salamander Designs Chicago Finish. We also sell the Miami (White) finish and the Oslo (Black with glass front doors) options as well as the full Salamander Designs line up. They manufacture cabinets for all models of Ultra Short Throw projectors including LG, Samsung, Hisense, and Sony! Even if your not doing a UST projector be sure to check out Salamander Designs. They make great furniture that is all geared towards AV equipment with great vents and air flow built in as well as amazing customization options. The screen used is the Epson Silverflex 120" ALR (ambient light rejecting) and UST (ultra short throw) 4K Screen. Are you looking to build a home theater in your home? Call and speak with our specialist today for a free video consultation! We service the entire USA. We look forward to working with you!
Episode #1 Link: • HELP ME! I need a Home...
Episode #2 Link: • Renovating a BORING Po...
Episode #3 Link: • Prepping Home Theater ...
Episode #4 Link: • Wiring Home Theater 7....
Episode #5 Link: • Home Theater Wiring w/...
Episode #6 Link: • HOW TO Install the FOC...
Episode #7 Link: • Epson Silverflex Ultra...
Episode #8 Link: • The BEST Cabinet For Y...
Episode #9 Link: • Your Next TV? Uncoveri...
#hometheater #4k #movie #sports #gaming #entertainment #2023 #new #projector #how #howto #dreamedia #transformation
Man this room has turned out so beautifully. Such a transformation 😍
I really like the compactness with the unit in the cabinetry. One question I do have: How would you handle center channel speaker placement? This would make for an interesting video.
Very good question. Would have to have the screen a little higher and have a wall mountable center channel mounted underneath the screen or a small in height soundbar and hope whatever you use does not hit the bottom of the image being projected. This is going to be true with all of the short throws.
You should really move the projector until it hits the screen perfectly square without any digital adjustments. Digital adjustments slightly compromises the quality. Having it "wide open" and manually placing the projector until it's spot on is a pain in the ass but it's still the way to go if you're not just being lazy. That's why all the feet on the projector are adjustable, it's not to make it look pretty and flat against the hole in the TV bench, it's to make sure you get it to fit perfectly on the screen with just manual tweaking of the positioning.
has a really nice picture...
9:00 really enjoy the camera angle from the front of the Salamander cabinet . Beautiful cabinet.
Simply elegant 🎈
Thanks for the comment Thomas!
Excellent and helpful video. I'm buying an LS800, but because we watch TV in our multi-purpose living room, we have to use a pull-down screen attached to the ceiling. Do they even make ALR pull-down screens? If not, what would you recommend?
I just bought this projector but am still waiting on the screen to be delivered. This does seem like it will be a nice bright projector, especially with ambient light. The main issue with this projector that I am having a hard time with is the fact that IT IS NOT A 4K PROJECTOR! This projector receives 4k signals but outputs a 2k to 3k image with its pixel shift technology. They try to justify this by saying the human eye cannot tell the difference from normal viewing distances and their 3LCD technology makes up for any perceived resolution loss. While this may be true in many circumstances it does not change the fact that the projector projects way fewer pixels then a true 4k pixel shift projector. This is absolutely false advertising on Epson's part and I am shocked that they are not getting in trouble for it. You will notice a difference in resolution clarity with this projector compared to other true 4k pixel shift projectors, especially if you are up close to a 120" to 150" screen. The only thing that may be better on this projector regarding the image is the brightness and clarity with moving images due to Epson's 3LCD technology. So, it is a tradeoff with a true 4k projector, but Epson should not be allowed to market this as a true 4k projector.
What’s the picture quality like? And did the screen make any improvement? What screen you get? Asking as I’ve got the Samsung projector and the picture quality isn’t good in comparison to a oled tv, I’m returning it tomorrow, and either getting this projector as it’s brighter or a 85” oled, grateful for any feedback
@Mambo1701e I got the Epson 120" short throw screen for half off with the projector at Bestbuy. It does make a big difference. It really comes down to what you want. An oled will be a much better image with higher resolution and contrast, but a projector provides that huge imersive theater image. If you are sitting close to the screen, I would recommend the 85" oled as you will notice the pixelation on the projector image. If you are sitting a ways back from the screen, I would recommend the projector, as the larger image will be more imersive and you will not notice the pixelation.
@@Talon17thank you
How high is the board and how high is the board hanging from the ground? thanks
Is there a way to have it aufo boot into ur avr hdmi everyone ive always seen it shows the andriod tv first ? then they swap the source kinda crap
Is it possible to have the bottom of the screen 10cm higher than it is stated in the manual (6:24)? Can I adjust the projection parameters in order to have the image a bit up (instead of physically putting the projector higher)?
Great video brother. Does it have edge blending??? Enjoy👍👊👍
Sick with the recessed and speakers in woods. Drill or saw?
Zack, I only have one question. Is it better than AWOL 3500?. If yes, how?. Thanks.
Crickets......
@@robzilla69 indeed! Crickets.
No it’s not. 3500 is the king.
@@TheChadillac thanks buddy...
Isn't this comparable to the Hisenese L9G. I'd still prefer the Hisense for the eARC feature.
What is the length of the wall on which you have installed the screen?
Love it!! How Will you pass Atmos from the Ls800? For what i heard it doesnt have eARC
curious about this myself
He will be using Kaleidescape as a source. Probably not gonna use the apps built into the Epson, so ARC/eARC is irrelevant.
@@haukurorsson833 but what if someone does not use that? Is there a way to pass ATMOS to your AVR then?
@@Laidoffsick Nope, since it does not have eARC, there will be no ATMOS. Most people will probably be hooking up a proper streaming device anyways.
It does have ARC, he put it on a video before
I'd really like to know why this projector doesn't have wired ethernet!?! I just unboxed mine and realized you only can hook it up using wireless. Why why why! My cheaper VAVA model has a wired connection.
Quick question...... i have a 110" screen .what's the right distance should I have ls800.....thanks
you find all at thje LS800 manual.. 110inch: Offset from top of projector (2): 6.7 inches (16.9 cm)
My image is totally distorted! I’m frustrated because is so hard to correct them, regular projectors don’t have the problem😡😡😡😡😡😡😡😡😡
Is this screen acoustically transparent? If not are there any UST Screens that are? With this cabinet and some decent in-walls this could be the ultimate discreet 3.0 system for a living room
This is not acoustic transparent. I believe Vividstorm has one but I don't think it's the best.
From my knowledge I don't think you can get a proper acoustic transparent screen that's also an ALR screen because of how it works. VividStorm have one but it's only the bottom part that is not the ALR part.
@@justinbeamon6624 Bummer, cant have it all I suppose
🎉
Not knowing that you focus before you adjust the alignment is kind of a fail.
Likewise, not mentioning that digital keystone correction is absolutely NOT what anyone should be doing because you will have light spilling onto the wall. These are always the problems when advertising for a product rather than being real about the actual product. UST projectors are much more difficult to setup properly than standard projectors, but UST/ALR screens are a lot better than standard throw screens and much better than standard throw ALR screens.
Isn't it better to physically move the projector to adjust the image so it's perfectly aligned with the screen? Moving the corners via software is probably like using keystone correction on a regular projector, which can affect image quality, right?
Yep…you are right.
Keystone should be use only for the last adjustment.
I guess he didn’t want to struggle with moving the pj back and forth Lol 😂
That’s the only problem with UST projectors.
Good video Zac 🎉❤
That is why we put on the screen that this was an extreme example. The unit was square with the wall and pretty much perfectly square when installed but wanted to show the software in action
@@eEvangeliste using the keystone adjustment is only if your rally struggling with getting the unit square. That’s why we put on the screen that it’s an extreme example.
@@Dreamediaav Gotcha. Thanks for the reply :)
@@haukurorsson833 absolutely! thanks for watching!
I think, that fan noise of the LS800 is way too loud, unfortunately :(
Yeah, if you run it at max brightness I hear it gets loud. But you can always run it at like 2/3rds where it quiets down a lot. Almost all other UST's require you to come out a long way into the room, much further from the wall than this.
@@KimmoJaskari I have the LS12000B now :-)
I am a Epson lover. I have several high end Epson products but I was going to bite on this, but NO support for 3d movies. Crying shame. Probably would of cost Epson less then $50.00 to have the 3d chip added to the unit. Come on Epson. Especially there are now several high end theatre movies coming out in 3d.