How To Test FPV Cameras and Flight Controller OSD Chip // DS212 Oscilloscope
Vložit
- čas přidán 28. 08. 2024
- All the links are below
Consider Following me and supporting on Patreon for Big giveaways.
/ dronemesh
DS212 Oscilicope
www.banggood.c...
Protector
www.banggood.c...
Microscope Used
www.banggood.c...
Highly recommend these if you want the same test setup
www.banggood.c...
If you would like that Caddx Camer and want to support the channel check the link below
shopdronemesh.c...
Make sure to sign up to the newsletter and create an account to not miss big insane sales.
shopdronemesh.com
Android APP
play.google.co...
IOS APP
itunes.apple.c...
------------------------------------
I highly recommend these products if unsure
Tekko32
bit.ly/2NwffxB
kakuteV2 AIO
bit.ly/2CxQct0
Hakcrc (Best Budget ESC)
bit.ly/2OgrOlO
25km Range on these awesome VTX's
FX2
goo.gl/8PswEP
X2
goo.gl/VsDZ6n
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
bit.ly/2NwBVxt
Batteries I use
bit.ly/2PlCvQn
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
bit.ly/2CwG17Z
Xt60 Premade I use
bit.ly/2Pmf89j
Heat shrink I mentioned
bit.ly/2PkrVcA
Soldering station
bit.ly/2zZP9za
Checkout the website for more details on the reviews
Website updated 2 to 4 days after the release of the video
dronemeshlab.com
Follow me on Facebook
/ dronemesh
Consider Following me and supporting on Patreon for Big giveaways.
/ dronemesh
Contact: mesh.drone@gmail.com
---------------------
Song Used
/ living-in-stereo
------------------------------------
Song Used info
Track was provided by NoCopyrightSounds
Paul Flint - Savage [NCS Release]
• Paul Flint - Savage | ...
Paul Flint
• / paulflintmusic
• / paulflintmusic
• / paulflintmusic
• / paulflintmu. .
• Mastering by redwolfmasterin...
Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Distrion & Alex Skrind...
Download/Stream: ncs.io/LightningYO
ID: dj2938hd298hflahsknckdfhsidufh9398
These are the videos we need in this community man! Honestly dope..keep up the good work bro! Any chance you can share some light on the Dalrc 4 in 1 esc problems? Even Joshua Bardwell isn't a fan!? People are saying maybe the wiring diagram is upside down creating issues? 🙏
I have built 4 Quads with the Dalrc Engine and its the ones I fly the most.. What could of happened is simply bad mosfet and or a possible bridge on the heatsink.. I will try to contact JB and ask him to send it to me.
Drone Mesh Great bro and thank you for that prompt reply! I'm not as worried as most because I do have the dalrc complete stack thanks to you 👍 great content as always
Drone Mesh That would be awesome!
"Do I wanna see more videos with this oscilloscope, he asked in the video.? then please say so..??". sure I SAY SO..!!
None the less, funny how much I have learned from your few videos with this tool..
Miniware is linking to another video on its product page that doesn't explain jack about use-approach..
If you still have issues of saving settings and setup, then say so.. very easy and works like a charm.
Becuase of your comment I'll create newer videos with much higher quality than these.. Have a great day :)
@@DroneMesh Tried it on my old runcam imgur.com/a/bZKztlL
The "Louis Rossmann" of FC boards! Love it so keep them coming.
Airwaves Ted it depends if hes ppbusg3hot
I would love to see you go deeper in this. Great informativ video for the one who cares.
I really needed this 🙏
Thank you for making and sharing 🤝
Definitely more of this troubleshooting info/vtx/rx/v reg ect.
Very interesting
This is extremely useful! I have issues with my iflight Nazgul5 with the succex f4 FC. Had the analog version and the OSD never worked. Added the vista and still no OSD(i tried different UARTs RX/TX but no luck so am thinking its a hardware issue. A fix video would be amazing!
I would love a more in depth video. I have the holybro kakute/tekko32 stack, first day I crashed and lost current sensing. Osd worked fine for a day or two without current or voltage now Osd doesn't work at all... fixable? Or should I just buy a new stack
Really interesting ideas on how to start using that very cheap oscilloscope! I've got an arduino starter kit from BG you recommended a while back, if you need an idea for more vids, maybe do an arduino how to or build project once in a while? I'm sure the kind of subscribers you have are interested in doing some hands on basic electronics like this video showed. Also, knowing how to use a multimeter properly and continuity testing is so essential to quad building I've found, maybe another idea for a vid?
You are a testing machine!!! Thanks man I'm shure this will help many!!! 👍😀👍
Very interesting content! I would love to see more of these videos. Currently I'm having an issue with a Tekko32 ESC : continuity between telemetry and ground signal pad. Unfortunatly my knowledge doesn't reach further than measuring pads...
great video i have the same Oscilloscope .
I would have 10 extra flight controllers if I knew how to test, fix or bypass a regulator. Hint hint. Thanks buddy! Love your channel!
Pretty interesting, dude! Thanks a lot! 😀
Dude, speaking about the Caddx Turbo Micro F1, it's awesome, but I'm going to need to buy 2 CCD cameras... Because I'm going to use them in rc cars (in 2 crawlers, one mine and the other is my father's). So... Do you recommend any camera? I need a good but cheap one. The "budget camera", let's say. 😊
Cool Video ! WAY COOL is that OSC. Last time I used one was in the 80"s and it was huged ? anyway Keep up the good work
I have a FC that had a little water accident two years ago. The only thing that is not working anymore is the OSD but that's reason enough to not use it anymore. It passes the analog video signal through but it's not adding the OSD since the water crash. By now I'm switching from analog to DJI. Is there hope that the OSD will work with the Vista because it's getting the OSD over a UART and not from the analog video pad of the FC.
Love it! Thank-you
i like this sort of vid. thx
Is there any difference in fpv camera with built in OSD and Flight controller with built in OSD?
Great video !
I have a AIO 1S FC - (Happymodel Diamond F4 1S 200 mW) on which the internal VTX died (only 3 meters of range) - Im searching for the pin which gives me video out (there's no older pad for it)
Can you help ?
15:13 min
Pin 26
third from the top left
Cap
75 Ohm
Video out pad
VERY interested! Especially interested in finding out why the actual OSD (telemetry read outs) are not appearing on one of my quads.. I have video, but NO OSD... any clue?
amazing ricardo ntsc vs pal? Have you tried switching them?
Good thought.. but YES... I've even used different cameras.. swapped NTSC..PAL.. and back and forth... VIDEO but NO telemetry on screen
No onscreen telemetry... I'm getting all my telemetry back to the radio by smart-port...
amazing ricardo what fc and are you using sbus?
PAL or NTSC? what do you prefer?
Does not matter but NTSC is a tiny tiny bit faster.
Problem: No OSD from F4 Flight Controller. Cause: Caddx camera video signal was killing it. Disconnect camera, OSD works. Connect camera but unsolder only video wire and OSD works. So it's not a power issue. Because camera was connected with power on. Solution: Swapped Caddx with a RunCam. Problem solved. Oh, camera video always worked.
When will we be able to record osd data to a log so we can add it in post to a 4k video? Yeaaaah :)
CHAMELEON FPV That's a great idea.. I'll look into tommorow.
Drone Mesh wow! If you make that you will get sooo much views that would be insane for the channel and the comunity! Thank you very much for thinking about it, I was already discussing it with a friend but he says the way that the osd chip draws the lines cant be recorded in any way, but I was thinking that the Soc needs to send some data to the osd chip so the osd would know what to draw, so you need to find out how to grab the data from the soc thats being sent and that I think would need programing skills and a lot of time, but I'm shocked no one is trying anything about that...