4D lidar vs 4D radar
Vložit
- čas přidán 12. 09. 2024
- AEVA Aeries II (FMCW lidar) demonstration.
There are 3 grids:
- 10x10 with 10m cell (100m x 100m),
- 10x10 with 20m cell (200m x 200m) and
- 10x10 with 40m cell (400m x 400m).
The lidar is in the middle-left of the grids.
The distances from the lidar to the edges of the grids are: 100m, 200m and 400m, respectively, as depicted below:
||(lidar) 100m| 200m| 400m||
What's the problem to the sensors will be better? Litography? Why do not make the parts of does sensor in a 3D printing?
Could you please show the both sensors capabilities in adverse weather conditions?
It is possible in the future, but not in the near one.
Use Radar instead for Adverse conditions