How to install a portable A/C unit into a casement window

Sdílet
Vložit
  • čas přidán 1. 05. 2013

Komentáře • 213

  • @SpizawkDaKizowz
    @SpizawkDaKizowz Před 5 lety +6

    I've been thinking about this problem for years, and I'm sad to say your creative solution never occurred to me. Thank you so much for sharing your idea!

  • @anastasia2657
    @anastasia2657 Před 10 lety +15

    How charitable of you to make this video. Thanks

  • @omarhammoud7223
    @omarhammoud7223 Před 8 lety +11

    this is an excellent idea, you just solved a problem that i has been thinking about for days, thanks

  • @gilvandias9395
    @gilvandias9395 Před 2 lety +27

    *So amazingly quiet and **Fastly.Cool** in my room! 42db is at a whisper level. I bought 2 and installed myself.Very sturdy bracket and easy to adjust to fit windows of different size. Absolutely fabulous units!!*

  • @brynjarthewarrior2680
    @brynjarthewarrior2680 Před 7 lety +4

    Finally, an idea I can work with!!! I have the same type of window. I live in San Francisco, CA., and even though it is cool outside, it's always hot in my studio. Thank you, you showed me how to deal with my window.

  • @YellowJacketGroup
    @YellowJacketGroup Před 9 lety +1

    Love this so much. Very creative fix AND keeps the window like a window :D

  • @SynteconlineAuSupplements
    @SynteconlineAuSupplements Před 9 měsíci

    Easy set up. Comes with everything you need for a snug install. Gets very cool. Thank you.

  • @wendymontalvo8257
    @wendymontalvo8257 Před 8 lety

    Awesome idea! Thanks for sharing. I also have Anderson windows with the pull out screens. Going to find some glass makers for create the insert you show.

  • @marthagmc
    @marthagmc Před 5 lety

    Cute dog!! Thanks for this information. I can't wait to get my new portable A/C up and running.

  • @calinputiciu
    @calinputiciu Před 7 lety +2

    I just did this, thanx. Took my window to a glass guy , he cut a hole in the glass for like 6 bucks and there you go. Great idea.

  • @vanceb_24
    @vanceb_24 Před 8 lety +1

    genius. This is exactly the sort of setup I was hoping to see out there.

  • @livelife069
    @livelife069 Před 6 lety +4

    Thanks for this great idea. I have been straining my brain trying to figure a way to rig a a/c in my bedroom. It also has these idiotic windows (only horizontal and on the upper part of window). I already rigged a slider kit for a regular slider type window in living room that works great. Accidently melted the original slider which warped it and made it useless. With much thought I figured why not rig one out of heavy cardboard. Was quite proud of myself after this little accomplishment. Just couldn't wrap my head around the bedroom problem. Now, thanks to you, I've got it figured. IT CAN BE DONE! WE HAVE THE TECHNOLOGY! ! Thank you soooo much for sharing.

    • @NikosKatsikanis
      @NikosKatsikanis Před 10 měsíci

      why they make these dumb windows so much

    • @livelife069
      @livelife069 Před 10 měsíci

      @@NikosKatsikanis
      My sentiments exactly! I think they just want ppl to suffer! 🙄🙄

  • @aosolorio
    @aosolorio Před 10 lety +3

    Very helpful! Thanks for posting!

  • @ivine6455
    @ivine6455 Před 11 lety

    This is a great and fairly easy idea. Thanks for explaining it.

  • @muratmutluozturk
    @muratmutluozturk Před 10 lety +2

    Very helpful video. Thanks so much.

  • @piettefrank
    @piettefrank Před 8 lety

    Now that's how to do it! Great video and thanks for the info

  • @anderson8kate
    @anderson8kate Před 10 lety +1

    Thank you... I have sent this you tube to my building contractor...

  • @andreaviverito4638
    @andreaviverito4638 Před 7 lety +3

    Your are so frickin clever ............................ I jjust love this.

  • @friedputty
    @friedputty Před 4 lety +8

    Thank you, Hubert! We did exactly this and it works great!
    Those afraid of DIY, just remove your screen. Take it to the glass shop. Have them make you a piece of polycarbonate that size, framed in metal screen channel to match the existing screen, with a little pull tab to help you remove it if ever desired, with a hole cut in the polycarbonate in the size and location you need, with the connector for the AC hose(s) installed in the hole (usually you can just unscrew the connector from the standard plastic window-filler panel that was supplied with your portable AC). Take it home, use it to replace your screen, connect your AC hose, crank your casement window wide open (don't forget!!!), and you're in business. Hint: when installing this panel in place of your old screen, use some of that self-stick squishy-foam weatherstripping all around it, so you'll have a more airtight seal, while still being able to revert to a regular screen later if desired.
    This brilliant plan will easily set you back a couple hundred bucks, depending on the size of the window, but it's money well spent!

    • @evl457
      @evl457 Před rokem

      brilliant! Thank you! Profesh!

    • @ambersliter1790
      @ambersliter1790 Před 4 dny

      Material Answers: From my research, aka visiting multiple hardware stores and calling a number of glass repair, plexiglass, and mirror and window professionals.
      Polycarbonate:
      1/8 inch is the standard for storm window/screen inserts. Call around by searching for plexiglass fabricators and wholesale. I was quoted a range of prices so get quotes! I am looking for a cut that is 24"x17.25" best price was $27.30 for plexi cut alone, most expensive quote was $80 for the plexi cut alone. Some folks will charge for the whole sheet it was cut from, some you can find a scrap piece to buy from, the cheapest was just for the size I needed. If you do not have these options I also found stock pieces at home depot for around $30 that I would need to cut down and I was unsure if it was UV coated, which can help the material last. You can cut your own hole with a plexi cutter found near the plexi sheets window isle materials at Home Depot.
      Bailey Sash (aluminum frame material):
      This is the name of the material you are looking for custom framing. I found a supplier locally at a glass store, and I also found additional options on google. 5/16 of an inch thickness is the standard to hold up to an 1/8 of an inch. You do not want a screen frame kit, I only found frames with a curved bend for the screen to bend over with rubber to hold the screen in, which would not allow plexi to slide into. You can cut the frame with a saw.
      Pay for assembly:
      I also got quotes for services to custom-build the plexi frame insert. The range I found was $100-$270.
      I hope this helps folks!

  • @jilljames4530
    @jilljames4530 Před 7 lety

    Smart solution! Thanks for the video.

  • @floppyandbear2010
    @floppyandbear2010 Před 11 lety

    Thanks for sharing. Just what I was looking for!!!

  • @missdenis4576
    @missdenis4576 Před 2 lety

    Really excellent idea(s) .. finally a solution. I’m on it.
    For everyone asking about thickness, take your screen to a window repair shop, they’ll determine that.

  • @ceopresto
    @ceopresto Před 7 lety +4

    man...this is genius! Thank you. Would you be open to doing this for my window? I will ship you my screen so that you can get the exact measurements to create a poly-corbonate window for me...honestly. This is genius!

  • @lawdog25
    @lawdog25 Před 7 lety +1

    Thank you! You helped solve my problem!

  • @HubertJass
    @HubertJass  Před 10 lety +36

    To the person who feels the idea is ludicrous: I do not live in a tornado or hurricane prone area. As a matter of fact, we can't open our windows at all for half of the year due to the cold. The house is 38 years old and the windows are original. Never had a problem with the wind taking the crank outs off. And they have been open in storms. Including the famous Labor Day Derecho of 1998. Of course these are Andersens and not Pellas. Just shut the window if a storm brews.

    • @vncstudio
      @vncstudio Před 8 lety +2

      +HubertJass Brilliant idea! I haven't bought an AC because I wasn't sure how to proceed with casement windows. We only need an AC for a few days in a year though but it's nice to have.

    • @noblesw77
      @noblesw77 Před 8 lety

      This is awesome. We've been looking for weeks for a solution. One question, though... where did you get the round fitting that you screwed to the poly-carbonate? Most of the portable A/Cs we looked at have a big ugly piece of plastic that is designed to fill the opened area of a sash window. Did you have to have this piece fabricated? If it came with your portable A/C unit, would you mind sharing the make and model of the unit?

    • @kurtreber9813
      @kurtreber9813 Před 8 lety +3

      +vncstudio i have to be honest... i dont think the idea is all that unique or original. i think the real issue is whether you can get someone handy enough to do such things.

    • @jimh8340
      @jimh8340 Před 8 lety +3

      I live in NYC in a ground level apartment without a hole for a wall through AC unit, landlord wont let me hire a contractor to blow a hole through, this is the best move for me. thanks for the great idea. like you said, most of the year the AC is put away because it is cold here, and the windows shut. hurricane coming? not only do I close the windows but I have a whole checklist of other crap I do also. this is great thank you.

    • @usfanlovesjiwoo1978
      @usfanlovesjiwoo1978 Před 4 lety

      This is an excellent idea and it looks good too.

  • @ElDuderino502
    @ElDuderino502 Před 6 lety +1

    This is exactly what I'm going to do. Great idea.

  • @roberttowns-wilson8520
    @roberttowns-wilson8520 Před 7 lety +1

    what a great idea. I will follow your suggestions

  • @tinanbob
    @tinanbob Před 7 lety +7

    love the dog!

  • @ninadigeser6491
    @ninadigeser6491 Před 9 lety

    Really appreciate this idea! Thank you.

  • @louisebelleau2703
    @louisebelleau2703 Před 5 lety

    Many thanks! Love your dog :-)

  • @avebobify
    @avebobify Před 6 lety

    This was very helpful! Your dog is too cute also

  • @CoZmicShReddeR
    @CoZmicShReddeR Před 4 lety +3

    I hate my Casement Windows! :p It's too bad there isn't a market for this! I really don't want to mess with all this but I really like what you did! I found the casement screens at Home Depot and the Polycarbonate sheets at Lowes! Now I just need to figure out how to cut it! :p

  • @rafaelmiranda167
    @rafaelmiranda167 Před 2 lety

    very good idea. thank you for the Valuable information.👍

  • @beanqween9458
    @beanqween9458 Před 3 lety

    Thank you, this is super helpful.

  • @jayedeveraux
    @jayedeveraux Před 9 lety +36

    was waiting to see you put it in LOL

    • @wunder648
      @wunder648 Před 5 lety +2

      me too, he shows how he made the window but not how to install it. helps only part way. waaaaaaaaaaaaaaa lol

  • @Micscience
    @Micscience Před 11 lety +5

    If you can't afford poly carbonate which is $99.00 for a 72x36 in. sheet, you can do what I did. Make a screen frame out of wood trim and use painters plastic sheet which comes in a roll. If you layer the plastic and stretch it nice and tight it will hold up the exhaust hose however I made an extra support just in case. Everything worked fine for me. good luck.

  • @winkapeep
    @winkapeep Před 11 lety

    Thanks! This was really helpful!

  • @mariannesullivan7610
    @mariannesullivan7610 Před 11 lety

    Thank you for giving us a great idea.

  • @golfngirl41
    @golfngirl41 Před 7 lety

    Great idea. Now to find someone to make me one. Thank you!

  • @teramana8861
    @teramana8861 Před 6 lety

    good one bro. thank you so much for your idea

  • @TallMama321
    @TallMama321 Před 4 lety

    This is an amazing idea!

  • @JohnDean16
    @JohnDean16 Před 7 lety +1

    You're the man!

  • @KapinKrunch
    @KapinKrunch Před 8 lety

    great idea. I actually hate these casement windows but they came with the house

  • @colemanhoyt5437
    @colemanhoyt5437 Před 3 lety

    You're a bloody genius

  • @ebrooklyn5736
    @ebrooklyn5736 Před 8 lety

    Awesome video and Thank YOU

  • @michellecardenas2446
    @michellecardenas2446 Před 10 lety

    Thanks so much. I could not cool my condo last summer.

  • @dianeclayton5032
    @dianeclayton5032 Před 10 lety

    Thanks for the help! I choose your solution to the others I considered! :-)

  • @447flower
    @447flower Před 4 lety

    GREAT IDEA, THANK YOU SO MUCH. YES A LOT PEOPLE DO A VERY UGLY IDEAS TO RESOLVE THIS .

  • @MrAndyStenz
    @MrAndyStenz Před 10 lety

    Brilliant - thanks!

  • @benturtle
    @benturtle Před 7 lety

    Amazing work!!! I've had this idea but can't think of how to do the work on cutting the hole for the exhaust hose. Was it difficult to do? Good job!!!

  • @Nilesedge
    @Nilesedge Před 9 lety

    Great idea!

  • @floordior33
    @floordior33 Před 9 lety

    Great idea! Don't think I can do this on my own, but will get someone do it for me!!

    • @kurtreber9813
      @kurtreber9813 Před 8 lety

      but thats just it: who does these sorts of things?

    • @calinputiciu
      @calinputiciu Před 7 lety +1

      you can take your window to a glass guy, he'll cut a hole in the glass for you

  • @jarikinnunen1718
    @jarikinnunen1718 Před 11 měsíci

    I used a gym foam mat in narrow ventilation window, with duct bracket which came in kit. Paint make it fit to frame.

  • @nambiarsudeep
    @nambiarsudeep Před 7 lety +1

    brilliant!. Thanks HJ!. Question. What was the thickness you went with for your polycarbonate sheet in your setup

  • @kcat4202
    @kcat4202 Před 5 lety

    Pretty slick !

  • @DavidKulpSr
    @DavidKulpSr Před 8 lety +9

    We used a heavy gauge clear shower curtain ($14.00) cut to the size of the screen, clear taped to the frame. Mounted the kit that came with the unit on the bottom with a plastic hook with 2 sided tape and used the foam to seal it. A few hours labor to cut, tape, and mount the ducting.

    • @dmd5201
      @dmd5201 Před 7 lety +2

      This is such a great and cost-effective (cheap!) way to go about doing this. Did you have to cut the screen, or is it now also acting as a bug filter between it and the exhaust? What is the "foam" you mentioned? Thanks!

    • @DavidKulpSr
      @DavidKulpSr Před 7 lety +3

      Did Not cut the screen, great bug filter. :) The foam came with the kit for the unit. I used the foam to seal between the duct fitting and the plastic. They sell rolls of foam tape at Home Depot that would work also.

    • @Treegoduo
      @Treegoduo Před 6 lety +2

      Can you put up a video

  • @MrDulmes
    @MrDulmes Před 6 lety +3

    Nice idea! Do you get the screening framework from the glass dealer? Thanks.

  • @SoundOfYourDestiny
    @SoundOfYourDestiny Před 3 lety

    Nice. What did you use to cut the hole?

  • @kumargurutharan4043
    @kumargurutharan4043 Před 3 lety

    super idea man

  • @herculesmoversinc3006
    @herculesmoversinc3006 Před 7 lety +1

    Genius!

  • @blah987t5
    @blah987t5 Před 10 lety

    There is genius to the simplicity of this solution.

  • @vectorboy7
    @vectorboy7 Před 11 lety

    The glass place supplied and built the aluminum frame?
    If not, what kind of place will build the frame for you?
    Is Lexan the brand name of the polycarbonate?

  • @HubertJass
    @HubertJass  Před 11 lety +1

    A glass repair shop can supply the materials needed. You could probably get them onlne, too.

  • @twanaallen8755
    @twanaallen8755 Před 11 lety

    great idea

  • @bettydoyle5266
    @bettydoyle5266 Před 2 lety

    Thank you for the vidio you are a big help what parts do we bring to the glass shop for them to make it thank you Betty.

  • @coreylandstrom
    @coreylandstrom Před 6 lety

    Hubert - where did you purchase the frame? And, does the frame have a space for the polycarbon to slide in around the edge or is it flat-mounted? Thank you.

  • @angelocushman5936
    @angelocushman5936 Před 11 lety

    Thanks!

  • @alicen821
    @alicen821 Před 10 lety

    great idea! Is it imperative to have the aluminum framing around the polycarbonate?

  • @blkjeeptj7832
    @blkjeeptj7832 Před 10 lety +26

    You're a genius! Thanks so much for uploading this fantastic video!!!!! I have been wrestling with the EXACT same problem for 2 years. I made a quick trip down to my local glass guy with my screen (and a link to this video) and he fabbed a beautiful replica of your handiwork. Great idea HJ!

    • @TheMattShea
      @TheMattShea Před 9 lety +9

      How much did it cost?

    • @kurtreber9813
      @kurtreber9813 Před 8 lety +1

      you have a local glass guy? what category are they found in the yellow pages?

  • @Romulan112
    @Romulan112 Před 11 lety +3

    I am about to undertake this method. I will let you know how my project works out. I am suprised that Anderson Window doesn't make this already as an accessory. ITs not like portable a/c units just came about.

  • @HubertJass
    @HubertJass  Před 11 lety

    I did not remove the outer casement window sash. I just crank it out as far as it will go so the exhaust air has somewhere to go.
    Maybe a glass repair place can put weather stripping around the piece they'd make for you to close up the gaps.

  • @492716
    @492716 Před 9 lety

    omg i need one of these pleaseee, such a pain in the ass to try and get the hose outside without the hot air being stronger than the actual air con

  • @HubertJass
    @HubertJass  Před 11 lety

    The A/C unit is a NewAir AC-14000E.
    14K btu.
    Bought it on-line.

  • @druchiman1
    @druchiman1 Před 11 lety

    Where did you get the glass and the frame? I'm also looking to get a portable ac unit and I have the same Andersen casement window but not sure where to get the polycarbonate.
    Thanks.

  • @racecar504
    @racecar504 Před 9 lety +3

    Great idea building this , and thankyou very much for posting this vid.. What thickness polycarbonate did u use?

    • @valoa
      @valoa Před 2 lety

      Did you find out what thickness?

    • @ambersliter1790
      @ambersliter1790 Před 4 dny

      @@valoa Material Answers: From my research, aka visiting multiple hardware stores and calling a number of glass repair, plexiglass, and mirror and window professionals.
      Polycarbonate:
      1/8 inch is the standard for storm window/screen inserts. Call around by searching for plexiglass fabricators and wholesale. I was quoted a range of prices so get quotes! I am looking for a cut that is 24"x17.25" best price was $27.30 for plexi cut alone, most expensive quote was $80 for the plexi cut alone. Some folks will charge for the whole sheet it was cut from, some you can find a scrap piece to buy from, the cheapest was just for the size I needed. If you do not have these options I also found stock pieces at home depot for around $30 that I would need to cut down and I was unsure if it was UV coated, which can help the material last. You can cut your own hole with a plexi cutter found near the plexi sheets window isle materials at Home Depot.
      Bailey Sash (aluminum frame material):
      This is the name of the material you are looking for custom framing. I found a supplier locally at a glass store, and I also found additional options on google. 5/16 of an inch thickness is the standard to hold up to an 1/8 of an inch. You do not want a screen frame kit, I only found frames with a curved bend for the screen to bend over with rubber to hold the screen in, which would not allow plexi to slide into. You can cut the frame with a saw.
      Pay for assembly:
      I also got quotes for services to custom-build the plexi frame insert. The range I found was $100-$270.
      I hope this helps folks!

  • @taniac5581
    @taniac5581 Před 11 lety

    Did you cut the hole yourself? If so, what tool did you use, please?

  • @pippaknuckle
    @pippaknuckle Před 5 lety +3

    Great idea, I think I will use the default window kit in the bottom of the new frame and have the rest polycarbonate. That will save me having to cut that big hole out.

  • @stevenvasquez5185
    @stevenvasquez5185 Před 5 lety

    Thanks HubertJass. Do you remember how thick the material you used was?

  • @HubertJass
    @HubertJass  Před 11 lety

    The Lexan slides into a channel in the frame.

  • @tomprovan6817
    @tomprovan6817 Před 6 lety

    Hi I used lexan which does not yellow from the sun had a hole cut in it at a glass shop and used Velcro tape so I can attach and take off in the winter

    • @tomprovan6817
      @tomprovan6817 Před 4 lety

      @@A1A1591 no Lex and does not yellow it does cost more money though

  • @jodhast.clair-canaii4427
    @jodhast.clair-canaii4427 Před měsícem

    I need to see a video on how to make this and parts list buddy

  • @ericvondoodleburg8388
    @ericvondoodleburg8388 Před 5 lety

    Airedale dogs rock😁

  • @judymickens4989
    @judymickens4989 Před 3 lety

    Great Idea!!! yes it will look like crap the other way

  • @mikeg4478
    @mikeg4478 Před 11 lety

    How did you attach the glass to the screen frame?

  • @qrhino5405
    @qrhino5405 Před 6 lety

    where did you get the sleeve that goest in the polycarbonite?

  • @Maryam-mw1wm
    @Maryam-mw1wm Před 5 lety

    How do you cut the hole out of the polycarbonate and how do you make the frame? What do you need to buy?

  • @AquaCarb
    @AquaCarb Před 6 lety

    So want one. what did you use for pipe to go in the window?
    \

  • @BraBruce
    @BraBruce Před 5 lety

    Nice, an Airedale!

  • @mikes5004
    @mikes5004 Před 6 lety

    Excellent idea, I have the same windows and I hate them. I love your idea but there is one serious issue for me and that is high winds and I also live on the 6th floor. I think I would have to remove the actual window and tho I am handy, not sure about the safety risks or concerns, certainly don't want to drop the window or fall out of the window for that matter. Any suggestions on my situation?

    • @friedputty
      @friedputty Před 4 lety

      I was worried about the same thing, but the screen you're replacing pops into a channel--it's unlikely to pop out. If you're worried though, keep the window closed while you're installing the panel and connecting the hose, and only then open the window wide.

  • @gghc
    @gghc Před 9 lety

    Hi HubertJass, great video! I have some questions for you if you don't mind.
    1) If I understand it correctly, your frame and polycarbonate are bought separately, how did you get them together? I guess it's by glue?
    2) When you pop in the self-made frame into the window area, since both things have a hard surface, did you encounter any air leak problem? If so, what was your fix?
    Thanks a lot and have a good day!

    • @SSCTDI
      @SSCTDI Před 2 lety

      did you ever get your answer? did you solve the problems you raised?

    • @gghc
      @gghc Před 2 lety

      @@SSCTDI not answered but I did it with glue. Not pretty but it works enough for the room so didn’t care~

    • @SSCTDI
      @SSCTDI Před 2 lety

      thanks

  • @PAphotoFun
    @PAphotoFun Před 8 lety

    If you can't find a local glass and screen repair place you and want to tackle it yourself, check home depot for "screen frame kits". They also sell the lexan polycarbonate sheets which they will cut to size for you. The 6in pipe needed for venting outside appears to be a soffit vent, home depot also sells one made by speedi-products. I'd keep the vent on the outside of it to help keep bugs out. if the outside parts removable I may add a piece of screen to ensure bugs stay out.
    I'm going to make this very soon. thanks for great idea that's cheaper than an actual casement window ac unit and will work with my current portable ac unit.

    • @patfiore7510
      @patfiore7510 Před 5 lety

      Not to say for people on the first floor you have to run for bars across it so nobody could kick it in very easily soon as they see there's something added

    • @Fawkyou187
      @Fawkyou187 Před rokem +1

      Screen frame kit doesnt have the groove (insert) on the inside but rather on the surface. I dont see how it would work.

    • @PAphotoFun
      @PAphotoFun Před rokem

      @@Fawkyou187 we had a piece of lexan cut to the size of the screen, drilled 2 holes on the sides to run a piece of string through (I had an extra shoelace pack laying around so we used that). Then we ran the string through the holes and looped it around the window latches. It doesn't move all summer, since the lexan is a tight fit. should you have any play in the fit you could still do the string and use a push pin in the wood to hold the strings tight, keeping the lexan in place. Maybe I'll post a video to show it. The windows I wanted the AC units for are bay windows so even the actual casement AC units didn't fit due to the angle.

    • @ambersliter1790
      @ambersliter1790 Před 4 dny +1

      Material Answers: From my research, aka visiting multiple hardware stores and calling a number of glass repair, plexiglass, and mirror and window professionals.
      Polycarbonate:
      1/8 inch is the standard for storm window/screen inserts. Call around by searching for plexiglass fabricators and wholesale. I was quoted a range of prices so get quotes! I am looking for a cut that is 24"x17.25" best price was $27.30 for plexi cut alone, most expensive quote was $80 for the plexi cut alone. Some folks will charge for the whole sheet it was cut from, some you can find a scrap piece to buy from, the cheapest was just for the size I needed. If you do not have these options I also found stock pieces at home depot for around $30 that I would need to cut down and I was unsure if it was UV coated, which can help the material last. You can cut your own hole with a plexi cutter found near the plexi sheets window isle materials at Home Depot.
      Bailey Sash (aluminum frame material):
      This is the name of the material you are looking for custom framing. I found a supplier locally at a glass store, and I also found additional options on google. 5/16 of an inch thickness is the standard to hold up to an 1/8 of an inch. You do not want a screen frame kit, I only found frames with a curved bend for the screen to bend over with rubber to hold the screen in, which would not allow plexi to slide into. You can cut the frame with a saw.
      Pay for assembly:
      I also got quotes for services to custom-build the plexi frame insert. The range I found was $100-$270.
      I hope this helps folks!

  • @SexDrugsFinance
    @SexDrugsFinance Před 6 lety

    I've read that polycarbonate discolors over time when exposed to uv light.

  • @peggiezamiaty7413
    @peggiezamiaty7413 Před 8 lety

    how did you cut the hole for the vent hose? I have a router, will that work?

  • @frankie2234
    @frankie2234 Před 8 lety

    Is your portable air conditioner still working?? I was curious about reliability?? Thanks.

  • @jackj6480
    @jackj6480 Před 6 lety +5

    Good stuff, Could you tell us where I can buy such frame and how much the thickness of polycarbonate? thanks

    • @valoa
      @valoa Před 2 lety

      Did you find out what thickness?

    • @ambersliter1790
      @ambersliter1790 Před 4 dny

      @@valoa Material Answers: From my research, aka visiting multiple hardware stores and calling a number of glass repair, plexiglass, and mirror and window professionals.
      Polycarbonate:
      1/8 inch is the standard for storm window/screen inserts. Call around by searching for plexiglass fabricators and wholesale. I was quoted a range of prices so get quotes! I am looking for a cut that is 24"x17.25" best price was $27.30 for plexi cut alone, most expensive quote was $80 for the plexi cut alone. Some folks will charge for the whole sheet it was cut from, some you can find a scrap piece to buy from, the cheapest was just for the size I needed. If you do not have these options I also found stock pieces at home depot for around $30 that I would need to cut down and I was unsure if it was UV coated, which can help the material last. You can cut your own hole with a plexi cutter found near the plexi sheets window isle materials at Home Depot.
      Bailey Sash (aluminum frame material):
      This is the name of the material you are looking for custom framing. I found a supplier locally at a glass store, and I also found additional options on google. 5/16 of an inch thickness is the standard to hold up to an 1/8 of an inch. You do not want a screen frame kit, I only found frames with a curved bend for the screen to bend over with rubber to hold the screen in, which would not allow plexi to slide into. You can cut the frame with a saw.
      Pay for assembly:
      I also got quotes for services to custom-build the plexi frame insert. The range I found was $100-$270.
      I hope this helps folks!

  • @Micscience
    @Micscience Před 11 lety

    I don't have a good enough camera, however I can post pics of my window which is made out of scrap plywood. The middle is for the AC exhaust and I have two ply wooded doors which open when I want fresh air.

  • @DarcyParker22
    @DarcyParker22 Před 9 lety +5

    What kind of frame profile did you use? I found 84" Lineal Frame that I can use to make a screen frame at Lowes. But it has a bend in it to press the spline into so it holds the screen. I am not sure how you fixed the polycarbonate to the frame. I am assuming you used a different kind of frame.... but not sure what it was.

    • @ItsNot4Everyone
      @ItsNot4Everyone Před rokem +1

      Did you ever figure this out? I am looking to build one and came across this same problem.

    • @DarcyParker22
      @DarcyParker22 Před rokem

      @@ItsNot4Everyone unfortunately no....

    • @ambersliter1790
      @ambersliter1790 Před 4 dny

      Material Answers: From my research, aka visiting multiple hardware stores and calling a number of glass repair, plexiglass, and mirror and window professionals.
      Polycarbonate:
      1/8 inch is the standard for storm window/screen inserts. Call around by searching for plexiglass fabricators and wholesale. I was quoted a range of prices so get quotes! I am looking for a cut that is 24"x17.25" best price was $27.30 for plexi cut alone, most expensive quote was $80 for the plexi cut alone. Some folks will charge for the whole sheet it was cut from, some you can find a scrap piece to buy from, the cheapest was just for the size I needed. If you do not have these options I also found stock pieces at home depot for around $30 that I would need to cut down and I was unsure if it was UV coated, which can help the material last. You can cut your own hole with a plexi cutter found near the plexi sheets window isle materials at Home Depot.
      Bailey Sash (aluminum frame material):
      This is the name of the material you are looking for custom framing. I found a supplier locally at a glass store, and I also found additional options on google. 5/16 of an inch thickness is the standard to hold up to an 1/8 of an inch. You do not want a screen frame kit, I only found frames with a curved bend for the screen to bend over with rubber to hold the screen in, which would not allow plexi to slide into. You can cut the frame with a saw.
      Pay for assembly:
      I also got quotes for services to custom-build the plexi frame insert. The range I found was $100-$270.
      I hope this helps folks!

  • @taniac5581
    @taniac5581 Před 11 lety

    Also, what portable A/C unit do you have?

  • @yG65gT6
    @yG65gT6 Před 7 lety

    How much did your polycarbonate glass cost?

  • @mrmcclear
    @mrmcclear Před 5 lety

    How did you cut out the hole?