Installation Of Xprite 36" Rear Chase LED Light Bar On 2021 CAN-AM Maverick X3
Vložit
- čas přidán 26. 08. 2024
- In this video I show you how to install an Xprite rear chase light on my Can-Am Maverick X3 XDS Turbo RR. Xprite has definitely impressed me with their customer service and support. Truly a great product for a great price that I personally recommend. (NOT SPONSORED BY Xprite)
Link to the Chase light: amzn.to/3nznHhW
Mounts: amzn.to/3owIm6... Amazon goodies I use: www.amazon.com/shop/mohawkdavebuoff-road
#Canamx3 #rearchaselight #utv
I would of pulled the seats so much easier..I've pulled my seats at least 7 times lol. good job either way
The Xprite chase bar comes with some square headed stud/bolts that can be inserted in the rear of the chase bar down the raceway. Those two bolts can be pushed through the two holes at the top of the roll cage. Makes for a perfect level fit with the roll cage and you don't have to buy anything else!
Are the included square headed bolts long enough to go through the roll bar?
@@1ttcobra2003 Yes. I even cut mine down a little after installation.
@@dewmudgeon thank you
Exactly how i installed mine!😊
Nice video but just a suggestion about ur install I would have taken out the seats off and then remove the side plastic off just saying
Some people don't want to remove the seats due to the fact that the manufacturer has a huge bold note in the manual about using new hardware every time you take out the nylon nuts... but I agree it is an easier route. 🤙
@@MohawkDaveOffRoad I know If I was to tell u how many times I have already taken my seats lost count lol great video on the install
@@MohawkDaveOffRoad they say that so you can’t sue them for faulty bolt even though their is a very slim chance that would ever happen. Just a precaution for the company, heard that on many other videos.
Love your Durango project boss. Ive been waiting for the notification of a new video. Glad to see you back in the game!
Its on the way. Thank you for watching!
@@MohawkDaveOffRoad what’s your Instagram
Did you ever end up wiring the reverse light
Yes, I wired it directly on a switch with others reverse lights that I have.
Just ordered this bar for my KRX great video
I noticed the switch doesn't come with a fuse block or in-line fuse. Does it need it?
I have the same bar and I hooked it up the same way but only the left brake lights on the bar work when I hit the brakes(stock brake lights on both sides work like normal). I used the same wire so where exactly did you tap that stock wire at? Was it inside the fender well or further down? If I take that same wire off the chase bar and hook it up to the passenger side orange and white wire then only the right brake lights on the bar work when I hit the brakes(stock brake lights on both sides work like normal). I can't get both side brake lights to work at the same time. You didn't show the passenger side so I was just curious if you only had the driver side working and was running another wire to the passenger side
I only used one wire for the brake lights.
On the bar:
One wire is both brake lights. (red wire) connected to the white/orange wire under the fender.
Two wires are for left and right turn signals (if you have a kit)
one is for the reverse.
Or you might have a defective light bar.
Thanks for posting 👍😉😀
Mine came in flashing red and blue how do you change it to just orange like yours is
You got the wrong chase bar.
Got everything wired and rocker switch lights up but chase bar has no power ?
Great video. Do you know where I can get the wiring diagram for this exact Lightbar? Thanks
Check with xprite usa
Hey, this is the music Michael Franzese uses on his channel.
Can you put the link to the roll cage clamps
Will those mounts work with the oem roof?
Will this work with a rear windshield
What size of bracket did you get
Where did u put the negative cable cause on mine my switch stays on even if the off
It’s *
Did you had to get extension wire??
I guess im here to ask you the same question since he didn't answer lol. i have a 4 seater rzr
I’ve been trying to get the middle light to turn on but can’t seem to get it do you happen to know of how to wire it
That's your separate reverse light. If you have reverse lights, it gets wired into that. If you don't, you will need a switch.
Or just wire it into the existing switch
Is there a way to keep the yellow lights from flashing?
Yes, you can shut them off by holding down the pattern switch.
So my bar is similar to yours, mine has different color set up, just finished installing mine, but what’s the purpose of the center lights on the bar?
Center lights are for reverse.
@@MohawkDaveOffRoad do we have the option to wire them up???
@@alvaroquintana6363 not from the factory. You can do a micro switch in the shifter, which i think is pointless... or just wire it up on a separate switch. I wired mine in with a reverse camera on a separate switch.
@@MohawkDaveOffRoad cool deal thx!!!
@@MohawkDaveOffRoad that would be the white wire?
Will these mounts work with the oem.plastic roof??
You can mount the light directly to the roll cage without brackets with the included rail bolts. There are 2 holes in your roll cage for that purpose and it should work with the plastic roof.
Im curious why didnt you install next to the 4wd drive switches , why did you pick that location? Thanks
@@newmexicosxs2089 No particular reason.
First
@Mohawkdave555 🤙
This light bars a POS in my opinion. The center lights should come with an option to strobe if you want to. First chance i get im ditching this light bar.