TAMIYA Douglas A-1H SKYRAIDER / SCALE MODEL AIRCRAFT BUILD - 1/48 / U.S. NAVY
Vložit
- čas přidán 26. 01. 2024
- Hello everyone.
I am sharing with you all the building stages of Tamiya Douglas 1/48 scale A-1H Skyraider U.S. NAVY plastic scale model aircraft, as a guide to how to make it as quickly as possible, in as much detail as possible, with simple materials. You will also watch the simple and effective weathering techniques I use.
It can be done as it comes out of the box, but I detailed the cockpit using simple methods. I also improved the generic pilot figure given by Tamiya. This airplane model is a typical Tamiya classic. It is one of the models that can be completed easily and in a short time without causing you any effort.
I hope my video is useful to you.
Subscribe to my channel here:
/ @ugurkenel
Follow me on instagram
/ ugurkenel
Follow me on facebook
/ ugurkenel #scalemodel, #modelkit, #plasticmodel, - Zábava
Nice job! You’ve weathered it like it’s at the end of a 9 month deployment. A WestPac veteran. Well done.
Old planes with experience always attract my attention more. At this stage, it may be a little too much.
Many thanks! 🤝
I learned a few techniques watching your build. Cockpit is amazing!
I'm glad it worked for you. Many thanks! 🙏🙏👍
Love the music choices. Plus, leaving in the ambiance when needed.
Many thanks.
Прекрасная работа, достойна высшей похвалы. С любовью из России..
Thank you very much.
Top notch build, the only thing are the wheels: a fully loaded plane should have the tires flat on the ground...🤷♂️
Thank you very much!
Yes i totally agree. I was on my mind during production but the pressure to finish the video as soon as possible got in the way. 😉👍
That is one decidedly second-hand looking Skyraider. Lovely Job, thanks for sharing it with us.
Thanks a lot🙏🙏👍
I love you are putting in the time with the pilot figure! As any aircraft sitting on the ground with every access door open, cockpit empty, gear down, is broken and down for maintenance, you are making a scenario for an airworthy bird ready to fly. Personally I don't even buy a kit if the pilot figure is not included. Jets, without a stationary engine off prop are less easily broken if they are build sans the gear down. I do most prop planes gear down however, but wish somebodu would make a realistic clear...ish spinning prop disk for the prop planes. I scratch built a 1/48 B-29 into a KB-50J (used alot of old C-130 pieces, B-25 engine faces, and sheet styrene) tanking 3 F-105's w/probe and droge, but the lake of spinning prop disks takes away much of the majesty..... Anyway, your "spad" turned out great. 1/48 is a great scale for aircraft. Wish they'd make a B-47 and C-119 in 1/48!!!!
Absolutely fantastic job, I have this kit as my next project, I'll definitely try some of your techniques on my one.
Many thanks!! Nice to know it helps to you.
Great build as always, but that music is driving me insane.
Thanks a lot. Sorry for the music, this is my only option for now, free youtube musics.
That Skyraider kit with those markings are at least 40 years old.I am an Aussie modeler. In December 1982 I was live on the outskirts of Angeles.I had an American friend who was able to get me onto the base at Clark.I bought that kit and a 48th F100 at the PX cheap.About $US10 each.When I got home I met this guy who was a real artist and built both fantastic with oil stains weathering ect.My Skyraider is identical in markings but has no air brakes like in the video.I could never get to sleep. As 3 in the morning the Ruskies would send a TU95 to probe the defences and we would have a squadron of F15s Lift of directly over the the house.The only consession to it not be a real war was they would stay subsonic.Got scared one day and missed a fantastic photo.The Radio out of Clark was off the air and sky full of planes seeming to be headed to Vietnam.I was about to get on a bus but these C130s came over drop Paras. Releived it was an exercise I went to shoot them with a top of the line S.L.R. Used all my film and walking back 3 A10s passed in front of me ultra low and slow. One had his canopy open and seeing I was a white man he waved. I cursed not have any film left.Waved back of course.They must have flown in from Kadena. I never saw any A10s at Clark.
It's a great memory. Thank you very much for sharing !
You been to Clark too? I was only about150 yards from the Kamikaze Shrine marking spot first ones took off to hit American carriers at Leyte Gulf. Been dozens of times past House that Admiral Onishi lived in at the time.@@ugurkenel
Unfortunately, I never had the chance to be there.
awesome, aircraft model and cool repaint😍
Thanks you so much 🙏🙏👍
@@ugurkenel you're welcome
🤝
Spectacular! Stunning build. Great video.
Thank you very much! 👍👍
Unbelievable. Amazing work. 😮
Many thanks 🙏🙏🙏👍
Brilliant. Nice work, Ugur. Sometimes the addition of a well-detailed pilot figure adds much to a model. It really helps to demonstrate just how large the A-1 Skyraider was.
I totally agree that the figure is a very important part for a model airplane. But unfortunately, it is very difficult to find figures for every model. I wish figure production was much more and widespread.
Professional 🛩
Many thanks🙏👍👍
Exceptional weathering skills!!
Many thanks! 👍
Superlative! I learned a lot of tips and new techniques with this video! Thanks for sharing them with the world!! You're a special professional! Congratulations
Many thanks. I'm glad it worked for you.
Meu amigo excelente 😊😊😊😊 quê maravilha. Ok parabéns 👏.. Brasil. .. esse caça é muito lindo 😁. Já fez com a camuflagem do Vietnã? Deus abençoe sempre 🙏 família e canal.
Teşekkürler!
Stunning build my friend... love your videos! Beautiful wethering and final result...!
Many thanks! 👍👍
FANTASTIC build! I love how you do some techniques a different way!
Thank you.
I hope it is useful for you.
Awesome build my friend keep up the good work 👍
Thank you very much👍👍
You made everythig look sooo easy and still, final effect is gorgeus, love it!
Real beauty, sir!
If I gave that impression, I'm glad. But this model itself is also really high quality and very easy to make.
excellent commander
Thanks a lot 👍👍
Literally just started this one myself! It won't look as good as yours I'm sure!
Thanks a lot.
I'm sure you will do your best.
Cheers!
Kara versiyonunu yaptım kitin pilotu geğiştirmeye üşenmiştim böle çok daha güzel olmuş tamiyanın en sevdiğim kitlerinden ugur abi sende yapıyosun bu işi eline sağlık
Sea camuflajlı olanı bence daha güzel. J versiyonu ve mühimmatları çok daha zengin. Bende çok severim J modelini. Maketi elimde de var yakın zamanda onu da mı yapsam diye düşünüyorum 🙂👍
Very cool!
I went to a model store to buy one as soon as I saw this video.🛫
Many thanks!
I am glad it affected you in a good way.
I hope you enjoy the build as i did.
Cheers👍👍
Keyifle izledim ,elinize sağlık Uğur bey
Çok teşekkürler 👍👍
Comme d'habitude, une superbe mise en peinture. La modification de la figurine du pilote est superbe. Le "weathering" est magnifique. Belle réalisation...Félicitations.
~~
As usual, a superb painting. The modification of the pilot figure looks great. The weathering is magnificent. Great achievement...Congratulations.
Thank you so much, I'm really glad to hear that.
🤝👍
Nicely done! I really like the technique for the instrument panel and the weathering is very convincing!
Many thanks!
🙏👍
Again a wonderful video and a superb build! Keep going this way! Can’t wait for your next video
Thank you so much, hearing this motivates me.
Awesome model and paintjob!!!
Ideas in my Mind when I watched the Process.
Maybe less dusty bombs: but I get it... Weathering all the same pieces over and over is boring.
The bee decal: maybe it would need some more scratches on the red stripe, as the model overall is heavily weathered.
The exhaust sooth: its very sharp on the box art and on real photos. Maybe some masking tape on right after the hood could simulate a similar effect, and sharp edges could be softened up with some wash, oil sponge or so.
But well i have yet to overcome my hesitation doing such a big model in one go.
Thanks a lot.
I will take your suggestions into consideration in my next projects.
🤝👍
Elinize sağlık Çok güzel olmuş Harika bir model
Çok teşekkürler🙏👍
Beautiful work my friend❤
Many thanks🙏👍
Harika olmuş. Elinize kolunuza sağlık.
Çok sağolun👍👍
So impressive!
Thanks a lot!
Stunning !!!
Many thanks👍👍🙏
That is extremely fantastic eork of this model. I have several to build including a 1/32 scale Korean war version early overalldark blue. Being average modeller i don't know how im going to weather a sea blue large scale model. But that Skyraider build is superb. Very realistically weathered Aircraft.👍
Many thanks🤝
Weathering on blue NAVY aircraft: If it were me, I would generally make it look metallic from underneath. In the form of a scrape of chipping.
@@ugurkenel From George. I haven't had the pleasure of building many Sea Blue finishes. Very hard to get a super gloss finish unless from a spray can. I also have the 1/32 scale TBM Avenger Aircraft with overall sea Blue. Not completed yet.I still have trouble with which bue to use. Usually it's sea Blue but there has been a mention of midnight blue and dark royal blue. However I understand about Metal chipping. The only weathering I've done over gloss Blue finish is the exhaust streaks with the Tamiya weathering kits. Sorry I babbled on too much . Thanks for reply.👍
OOB builds are boring.
So that's why I admire even small effort of scratch building.
Well done, man!
Yes indeed, thatswhy i never achieved to finish as OOB.
Beautiful job!
Many thanks👍👍
Beautiful work mate!
Many thanks mate👍
Very good result my friend ❤
Many thanks😉👍
Очень классно _тоже попробую собрать такую модель
Большое спасибо
Nefis bir model olmus. Elinize saglik
Çok teşekkürler👍👍
looks awesome great job
Thank you 😉🙏👍👍
👍👍👍
🙏👍👍👍
Super well done!
Thanks a lot👍👍
What a sophisticated work!!!
You will have 1mil subscribers soon.
BTW, may I know what is 1st & 2nd song of BGM? It is awesome too😊
Many thanks! 👍👍
1 million subscriber: I wish such a thing was possible 🤞🙂
The songs you want are available in the description of the video in that order.
Cheers👍👍🤝
Excellent job,congratulations,from Greece!
Thanks !
Wow! Ugur that is outstanding.. I've picked up some brilliant tips along the way watching that.. Thanks for sharing and putting up the written explanations. Look forward to your work. 👍
I'm so glad it helped you. Thanks a lot.
@@ugurkenel yes it did... Just about to order one.. And will take your skills into me other models, thanks
Abi elllerine sağlık gayet güzel olmuş
Çok teşekkürler.
Gorgeous model build. Thanks for sharing! Subbed to your channel. 😃
I'm glad to hear it, thank you very much! 🤝🙏
Weathering is something else. Fantastic build sir. Cheers buddy 🍺
Many thanks! 🍻
Cheers😉🤝
Perfect 💪💪💪
Thanks a lot 👍👍👍
amazing.
Many thanks👍👍
Amazing work!,and the model behind and below to the left is a ia58 Pucara?
Many thanks. Yes it is Pucara. I have build it years ago.
Fantastique
Thank you🙏👍👍
That's one dirty old girl. Excellent work as always.
Amazing plane, Being dirty suits her very well.
Many thanks🙏👍👍
Olmuş gibi muhterem 😂
🙏👍👍
Very nice build! Sadly there seems to be no smaller scale available in the market.
Many thanks. I never heard 72 scale of it. But size of this model 48 scale is acceptable in my opinion.
The weathering looks good , the prop needs some weathering and chipping looks like it was installed yesterday, doesn't match the rest of the plane
Maybe a bit of story telling? A prop getting replaced while the rest of the aircraft is still crusty sounds believable.
I definitely thought about this during the construction phase. In many reference photos, I saw that the propellers were extremely clean, which was unique to this model, and there were only some scratches on the red and white stripes. Maybe it's because the material of the propellers is black metal or close to black.
Big work but a huge default, NO insingna are weathered.
I love your builds, but watching you put everything together with super glue kills me as I know your work would be so much better without it. You destroy so much detail trying to remove it and encourage fit issues. It definitely has its uses for attaching small parts.
You may be right, but it's my old habits.
I always broke or cracked the models I made without using CA glue. I can't be sensitive when making models. I damage it all the time by sanding it or dropping it. That's why I prefer to use super glue. Since the model itself is plastic, it is easier for me to complete the lost details later.
Beautiful job!
Thanks a lot 🙏👍👍