I love and appreciate your videos, too, like so many others. Although I’m three years after you posted this video, today, I’m going to cut without a mat for the very first time. And yes, I’m sort of new to Cameo 4, but I’m loving it. I’ve had it less than a year, and I let it set unused for several months until I finally got the nerve to use it. I love it! Thanks so much!!! 🌹🌹🌹
I received my Silhouette Cameo 4 two days ago. I have watched two of your videos and they have helped me a lot. Each one was very clear on how to use the machine. Looking forward to watching and learning more. Thank you so much.
I love your tutorials! I regularly cut without a mat, but did not know that trick about show cut border. No more forgetting to move stuff up and having the bottom not cut. Thank you so much!!
Hi Becky, thank you for this straight-to-the-point video! I've had my Cameo 4 for over a year now and I had completely forgotten to use it without the mat. I'm thinking being new I had not mastered inserting the vinyl properly and just resorted to going with the mat, and never went back. I love how you showed going matless without using the vinyl holder, I am definitely going to try that again, this method looks so much easier.
Very informative, and I’ve been using my C1 since it came out! Have the C4 now. Very impressed with video, no chattering, short, concise, and “💜 love” how you sped up those few spots! Well done 👍🏻!
Just cut out a large 1'x3' sign using your directions. It wasn't easy getting the vinyl lined up in the machine correctly, but I got it. You have to make sure that you're end that you're feeding into the machine is straight and at a 90 degree angle to the sides of the material. If it is, then it will stay straight when you cut it. But I love your tip to run the vinyl through before you cut it. I would have ruined a lot of vinyl without that tip. Thanks!
Waiting to get my Cameo 4 delivered, so looking forward to using it already got friends and family asking for things so I'll be able to practise before trying to start a small on the side business :D
Hi I've just came across your channel. I only have a scan n cut. Which is more available in Australia. But I'm having trouble finding tutorials on cutting vinyl without the mat. So thought to ask here if you know. New subbie 😁
Hey Kyonna, I haven't tried this with printable vinyl, I'm not sure if it would accurately pick up the registration marks. Off to do some research! ---Becky
I enjoyed the video. My question for you most of my vinyl has a cardboard tube in it. I usually use the pull-out tray to hold the roll. Should I keep the vinyl on the tube or unroll it prior to cutting? I really like the little tip about changing the feed option on the cutter. Thank you for the videos. I've watched several of yours today.
I'm just getting into making stickers. I don't have a cutting mat yet. My question is how do you make the vinyl cutout into a sticker? I've cut some material and separated it, but the material wasn't "sticky" on the bottom. Not sure if that makes any sense.
You taught me a few things such as the feed buttons are backwards. I was pressing up for forwards, and the Cameo wasn't doing anything. Then you taught me how to feed the end to the cross cutter automatically for a roll.
Hi Becky, I still have my original Cameo 1. I love it, it has a no mat cut setting. I've never tried it like that. However after watching your video. I'm tempted. Is it possible with the Cameo 1?
Yes! Absolutely! On the Cameo 1, you will just use "Load Media" instead of "Load Mat" on your actual machine. I would still have the software show "No Mat" also, just in case, but it shouldn't matter with the Cameo 1, what will matter is what option you choose when you load the material. I hope this is making sense. Let me know how it goes! ---Becky
Can you recommend cut settings for sticker paper? I just got the cameo 4 and I’m having trouble cutting. Not sure what blade setting to use and what force and speed would work best for vinyl sticker paper.
Hey Musab! I would recommend starting with the Printable Sticker Paper default setting in Silhouette Studio. From there, you can perform test cuts on your material to determine if you need to increase you force or blade. Hope this helps! ---Becky
When I cut without a mat my cameo 4 seems to scratch up the lower portions of the vinyl when its cutting (especially noticeable on holographic vinyl). I think it is because the cameo 4 is dragging the vinyl across the ground as it does its thing. Any tips on how to avoid this?
Hi Becky, your videos have really helped me feel more confident about using a silhouette cameo, so much so that I have just purchased a cameo 4 after looking at them from afar for the last 4 years!! I am glad that I bought it but I am having some trouble with mat-less cutting. So far I have managed to cut cardstock using my mat but the cardstock curled slightly when I removed it from the mat. I adjusted my rollers and tried to cut my cardstock without the mat but I keep getting the registration failed error when go to the send tab...any ideas on what I could be doing wrong? Design Settings: Cutting mat = None Send Settings: Pop-out Cut Edge, Cardstock Plain, Auto (Pop-out Cut), Autoblade I have also updated my feed settings like you have shown Any ideas?? Help! Thank you 😊
Hey Jade! I'm so glad you enjoy the videos. I'll be honest, I always cut my cardstock with a mat. I know there is a relatively new mat free cutting for cardstock but I haven't tried it yet. Maybe that is a new video I need to record. I do believe you need to select the Pop-out cut settings for the matless setting to work. Hope this helps! ---Becky
@@DesignBundles Thanks Becky 🙂 I am maybe trying to run before I can walk, so I’ll try again tonight but I might stick to using my mat in the meantime...I’ll keep my eyes peeled for a Design Bundles cardstock matless cut video though 👀 thank you ✨
my cross cutter seems different that yours. if i lower the tabs there is no way the vinyl can come out. so i have to wait until i've finished cutting, then lower the tabs for the cross cutter. ???
Hello, thanks so much for that! My vinyl does not seem to go out the back to be trimmed it goes back to the starting position and the only option I have is to then press the unload button. Do you know what I may be doing wrong?
Hey Linda, there is a part in the software that you have to activate for it to feed through the back after cutting. Check out the video at the 1:50 mark and you'll find where the setting is. Hope this helps! ---Becky
Hey there! I'm sorry to report that the glass shelves were purchased from a local retail store that was going out of business. I'm not sure where they come from originally. Sorry I can't be of more help! ---Becky
Hello. Just got my cameo 4 yesterday. Can you tell me your settings for cutting on the computer? Sometimes mine goes too deep then sometimes, it doesn't even scratch the vinyl. I have been using the mat but it sticks the underneath of the vinyl off and it ruins the paper for peeling
Hey there! When I cut vinyl with or without a mat, I just use the presets for Vinyl, Glossy in Silhouette Studio. If you are having trouble using a new mat, you can take a shirt or towel and press it against the sticky side, that will make it less sticky for you. Hope this helps! ---Becky
Thanks Susan, I am glad you are enjoying the videos. I don't have anything on those specifically, but I do have a video on helping when you are having trouble cutting, and I believe I talk about these two items, I'll link it below. But the blade number is the actual depth of your blade that is adjusted on the blade itself. If you have an autoblade, the machine will do this for you. The force is the downward pressure of your machine. It usually takes a combination of the two to determine the correct cut settings. Hope this helps! ---Becky czcams.com/video/sla2hHp_y3Y/video.html
So what should you set for the feed distance for any project to use the cross cutter? I am about to cut a 23" long project and wanted to feed it to cut close to the bottom of the project. Just not sure how much I should feed it.
Hey Ron! After this experiment, I decided that feeding it manually would be best because I'm too afraid to cut off the end of my design 😂 I'll play around with it some more and let you know if I get an accurate measurement. Hope this helps! ---Becky
@@DesignBundles I had heard 4" was the magic number, but then someone else said it was too much, so 3" gets it close and then you have to manually get it "perfect".
That is a very good question and the tentative answer is yes. But we are not talking about "real" wood, it has to be very soft such as balsa wood. I'm preparing a video for you guys, so stay tuned! ---Becky
New to silhouette from Cricut and when I cut without a mat it's not cutting through very well. Almost as if the blade was dull but I've only done a handful of cuts on it. Should I adjust the force higher? Or the number that looks like a dial that is also on the autoblade itself?
Hey Karla! I would personally start by increasing the force a little at a time, cutting small designs so you don't waste a lot of material. You can adjust the blade, but it is a bigger "jump" so to speak, and can cut through your material. Hope this helps! ---Becky
@@DesignBundles thanks so much for your reply! ❤️ I usually cut on "more" pressure when I was using cricut. So I think I was just used to super easy weeding. I also was switching between Amazon bought vinyl with thicker backing and the stuff I'd pick up from hobby lobby for short notice stuff so that could have a lot to do with it too. I tried 20 force and it still was a hassle to weed so I put force back to 10 and upped the blade to 2 - and that worked great! 😊
I have a question, so i have been working with my cameo 4 for about 2 months now but i have one big issue, whenever I cut without a mat the vinyl bunches and destroys the image. Why does that happen?
Hey Danni! It sounds like your vinyl may be getting jammed during the cutting process. Make sure the vinyl is flat when all possible and that it isn't curling up into the machine anywhere. This was especially common for me with the Cameo 3. Hope this helps! ---Becky
Hey Juan, if the blade is cutting all the way through on a depth of 1, I would turn it down to 0. Each blade is a little different and the new blades can be super sharp. If you're using an auto-blade, make sure the machine is adjusting it correctly as that could be an issue also. Hope this helps! ---Becky
If I'm a casual user of my Silhouette 3, are there enough benefits to upgrade to the 4? I'm trying to look at things logically, but it's so pretty that it's blinding me!!
Great question! I would say no, not as a casual user. The pretty machines are very tempting, but unless you need to use the rotary blade, the knife blade, or want to explore new materials (all very fun, of course), your Cameo 3 will cut vinyl, cardstock, paper and fabric just as well as a Cameo 4. Hope this helps! ---Becky
@@DesignBundles Thanks, Becky! Yes, my 3 does all I need it to do. I really appreciate the definitive response. If I ever have a few hundred dollars to spare (because that totally happens, right?), I might upgrade, but until then, I'll stick to my Cameo 3!
How do I change my print border? I'm using the basic edition and a cameo 4 it will only let me print an 8*11 space I've tried without a mat and page settings nothing is working please help
Hey Deandra! Your printer boarder is picking up on the settings of your printer. So if you go to the Print function (like you would if you are trying to print), choose your printer and click on "Preferences" (I'm on a PC) then you can select different pages sizes, etc. Hit Apply then Cancel and your new Page Border should adjust. Hope this helps! ---Becky
I got free outdoor vinyl with my new cameo 4 and I can't seem to cut through it at all 😂 I've been experimenting and finally got it to cut on the mat on number 3, 30 force, 4 speed and 3 passes. Cut right through to the mat but it's the first one that actually went through the material using the autoblade. I'm heartbroken for my cutting mat haha what on earth is wrong with this outdoor vinyl?
Hey Eveleen! Sorry to hear you are having trouble cutting. Normal "outdoor vinyl" should cut fine, but I have a video on helping to trouble-shoot cutting problems on your Cameo that may help, I'll link it below. Hope this helps! ---Becky czcams.com/video/sla2hHp_y3Y/video.html
Hi Becky, thanks for responding to my query. I did get to the linked video eventually and found that my blade wasn't loaded properly and wasn't changing depth automatically. Issue has been fixed, thanks to your video 😍😄
Hey Samantha! If your vinyl is going sideways, it means your vinyl is coming lose for some reason. I would first check to make sure your vinyl is tucked under the roller nice and tight (give it a tug after loading). Then watch the right side as it's cutting (that's usually the problem side) and see if it is coming lose during cutting, could it be that the vinyl is loaded at a slight angle? See if any of this helps and if you need more troubleshooting ideas, let me know! ---Becky
I've had this issue and find that it happens when I've accidentally not lowered my roller down (after adjusting the little stops). Once it's lowered again, it feeds just fine. Have you checked that?
Hey Joemari, it should technically fit through the machine, but your cutting area will still need to be within the 12" wide rollers. Hope this helps! ---Becky
@@DesignBundles thank you! I'm new to all this but I'm learning fast.. I'm an artist, I do a little bit of everything.. I'm excited to add all this to the arsenal! Thanks Again 💜
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
🎄 Dive into the festive spirit with Alpha DTF Print's UV DTF Christmas prints! Any recommendations for incorporating UV printing into holiday decorations? Share your ideas! @AlphaDTFPrint
That's a very complicated question LOL. I do think I'm partial to Silhouette Studio, I think the software is very robust and more functional than Cricut Design Space. However, once I purchased a Cricut, I actually think it has better cutting results, but only by a smidge. I usually recommend potential buyers to download the software for each and see which one feels more natural. Hope this helps! ---Becky
I have the Cameo 4 Pro and I have wasted so much material because my mat continue slip and my vinyl folds under the roller...😩😩😩 It’s so frustrating. Help!!
Hey Erica! I'm sorry to hear about your trouble cutting. Have you checked to see how tight your roller is locking down. When the bar is locked, you shouldn't be able to move your mat at all. If it's lose or is coming lose during cutting, I would contact Silhouette America's customer support for a warranty claim. Hope this helps! ---Becky
I did everything 100% exactly how you said and my blade doesn’t cut. You can barley see a small indent but it never cuts the whole way. I know it’s not a defect because this is the second Cameo 4 I got. What am I doing wrong?
Hey Anthony! Sorry to hear of your trouble. I have a troubleshooting video that may help, but it sounds like your blade to be honest. Hope this helps! ---Becky czcams.com/video/sla2hHp_y3Y/video.html
Just a tip. . . next time Edit with headphones on, duplicate your audio and on the duplicate put the sound on the right side with the little siliding button. . and you get stereo sound. .
for the life of me I can not see the feed option anywhere to change it. I have been trying to cut off the mat and watched numerous tutorials and it still slides all over:(
Hey Paulette! I'm sorry to hear about your troubles. Definitely check your roller bar (make sure it's locked) and your roller (make sure it's not coming out of place). The Cameo 3 models had a batch or design flaw where the rollers would come out of the slots when the machine was in use, so many crafters glued or taped the roller in place. Hope this helps! ---Becky
Hey Ruby! Can you tell me a little more about what it's doing? I also have a little troubleshooting video, it's for the Cameo but the same principles work for the Portrait. Hope this helps! ---Becky czcams.com/video/sla2hHp_y3Y/video.html
Hey there! Can you tell me more about what is happening? I'd love to help if I can! I'll also link a video I have on troubleshooting tips down below. ---Becky czcams.com/video/sla2hHp_y3Y/video.html
@@DesignBundles I was having a hard time loading it properly so it won’t slide. I think I got it down. Now I’m just learning when to apply different cut settings. Thank you.
*Attempts to cut a vinyl without mat and not watching a tutorial because I had a Cricut and I can do this!* *Cameo starts cutting incorrectly, I start laughing, fiancé shakes his head* *Come back to Becky with tail between legs* Hey, at least I got a good laugh about it!
I love and appreciate your videos, too, like so many others. Although I’m three years after you posted this video, today, I’m going to cut without a mat for the very first time. And yes, I’m sort of new to Cameo 4, but I’m loving it. I’ve had it less than a year, and I let it set unused for several months until I finally got the nerve to use it. I love it!
Thanks so much!!! 🌹🌹🌹
Thank you ! I felt so overwhelmed and you made this a little easier. I spent a couple of day just watching your videos. It definitely helps.
I received my Silhouette Cameo 4 two days ago. I have watched two of your videos and they have helped me a lot. Each one was very clear on how to use the machine. Looking forward to watching and learning more. Thank you so much.
I love your tutorials! I regularly cut without a mat, but did not know that trick about show cut border. No more forgetting to move stuff up and having the bottom not cut. Thank you so much!!
Awesome Erin! I'm so glad to share that little tip with you!! ---Becky
Thank you so much, I was having problems with my mat and your video was a God-send! I have subscribed!!
Your videos are my go-to when I get stuck on a project, thank you so much for sharing all of your knowledge!
We're always happy to help! Thanks for watching! 😊
Hi Becky, thank you for this straight-to-the-point video! I've had my Cameo 4 for over a year now and I had completely forgotten to use it without the mat. I'm thinking being new I had not mastered inserting the vinyl properly and just resorted to going with the mat, and never went back. I love how you showed going matless without using the vinyl holder, I am definitely going to try that again, this method looks so much easier.
You are so welcome!
Thank you, thank you, thank you! I was finally able to cut without a mat, I had the vynil sliding and your video helped me to resolve the problem!
I'm so glad to hear that Priscilla! I love cutting without a mat! Glad we were able to help you troubleshoot! ---Becky
Thank you so much! Feed options for cutting without a mat was the BOMB! Love you girl!❤️
Thank you for watching 😊
Very informative, and I’ve been using my C1 since it came out! Have the C4 now. Very impressed with video, no chattering, short, concise, and “💜 love” how you sped up those few spots! Well done 👍🏻!
a tip : you can watch series at flixzone. Been using it for watching all kinds of movies during the lockdown.
@Boden Arjun definitely, been watching on flixzone} for since november myself :)
@Boden Arjun definitely, been watching on flixzone} for since december myself :)
Thank goodness for you! I just got a cameo and i’ve been so overwhelmed! You make things so simple to understand 🤓
So glad it was helpful, thanks for watching! 😊
Thank you so much for sharing 😘 I'm getting myself a cameo 4!!! Can't wait to get my hands on it ☺️❤️
Awesome!! Enjoy your new machine 😊
Just cut out a large 1'x3' sign using your directions. It wasn't easy getting the vinyl lined up in the machine correctly, but I got it. You have to make sure that you're end that you're feeding into the machine is straight and at a 90 degree angle to the sides of the material. If it is, then it will stay straight when you cut it. But I love your tip to run the vinyl through before you cut it. I would have ruined a lot of vinyl without that tip. Thanks!
I have my cameo 4 for almost a year now and I never knew about the cross cutter until now. Thank you!
No problem! I'm glad we could show you something new!
thank you for your video, very helpful
I'm so glad to have these helpful tips ... Thank you
So glad you found them helpful!
Very helpful and I appreciate you sharing
Thank you for your kind words! We're happy you liked it! :)
Love this shirt!
Thanks, this was a good, clear demo! I'm about to try it on some beautiful holographic HTV and I'm a little nervous about it.
Awesome! So glad the video was helpful! Let me know how it turns out! ---Becky
Waiting to get my Cameo 4 delivered, so looking forward to using it already got friends and family asking for things so I'll be able to practise before trying to start a small on the side business :D
That's great, Sam!! Practice is essential to learning your machine, you'll be a pro in no time!! Thanks for watching, see you again soon! ---Becky
@@DesignBundles Just recieved it, done a few design tests and its brilliant! autoblade has been very good
Thank you thank you! I was about to throw this machine out the door! You helped me tremendously!
You are welcome! We're always happy to help!
It would be nice to include other versions of Cameo as well, as many out there still have their older cameos. But very helpful thanks.
Thank you for your suggestion!
Hi I've just came across your channel. I only have a scan n cut. Which is more available in Australia. But I'm having trouble finding tutorials on cutting vinyl without the mat.
So thought to ask here if you know.
New subbie 😁
Welcome! Thanks for watching!
Hello I just luv you're videos you have such awesome tutorials but my question is could this be done with regular printable vinyl
Hey Kyonna, I haven't tried this with printable vinyl, I'm not sure if it would accurately pick up the registration marks. Off to do some research! ---Becky
I enjoyed the video. My question for you most of my vinyl has a cardboard tube in it. I usually use the pull-out tray to hold the roll. Should I keep the vinyl on the tube or unroll it prior to cutting? I really like the little tip about changing the feed option on the cutter. Thank you for the videos. I've watched several of yours today.
Hi Lynn! Usually the tube is taken out if you are aren't using the mat.
Awesome video :) What are you using to weed with? Would you provide a link please?
I'm just getting into making stickers. I don't have a cutting mat yet. My question is how do you make the vinyl cutout into a sticker? I've cut some material and separated it, but the material wasn't "sticky" on the bottom. Not sure if that makes any sense.
You taught me a few things such as the feed buttons are backwards. I was pressing up for forwards, and the Cameo wasn't doing anything. Then you taught me how to feed the end to the cross cutter automatically for a roll.
Glad it was helpful! Thank you for watching! 😊
Hi Becky, I still have my original Cameo 1. I love it, it has a no mat cut setting. I've never tried it like that. However after watching your video. I'm tempted. Is it possible with the Cameo 1?
Yes! Absolutely! On the Cameo 1, you will just use "Load Media" instead of "Load Mat" on your actual machine. I would still have the software show "No Mat" also, just in case, but it shouldn't matter with the Cameo 1, what will matter is what option you choose when you load the material. I hope this is making sense. Let me know how it goes! ---Becky
Can you recommend cut settings for sticker paper? I just got the cameo 4 and I’m having trouble cutting. Not sure what blade setting to use and what force and speed would work best for vinyl sticker paper.
Hey Musab! I would recommend starting with the Printable Sticker Paper default setting in Silhouette Studio. From there, you can perform test cuts on your material to determine if you need to increase you force or blade. Hope this helps! ---Becky
So now that you have that vinyl image and it isn’t mirrored how do you press it while getting rid of the backing?
if I want to cut a piece of vinyl before I cut it - can I use the crosscutter to feed vinyl thru and just cut a piece?
When I cut without a mat my cameo 4 seems to scratch up the lower portions of the vinyl when its cutting (especially noticeable on holographic vinyl). I think it is because the cameo 4 is dragging the vinyl across the ground as it does its thing. Any tips on how to avoid this?
Could u advice why cameo 4 keeps asking registration failed . I'm following to cut simply a template design from studio on card stock paper
Why didn't you use the built in roll feeder on the front???, that bottom part of the cameo slides to place roll for cameo 4 at least
Hi Becky, your videos have really helped me feel more confident about using a silhouette cameo, so much so that I have just purchased a cameo 4 after looking at them from afar for the last 4 years!!
I am glad that I bought it but I am having some trouble with mat-less cutting.
So far I have managed to cut cardstock using my mat but the cardstock curled slightly when I removed it from the mat. I adjusted my rollers and tried to cut my cardstock without the mat but I keep getting the registration failed error when go to the send tab...any ideas on what I could be doing wrong?
Design Settings: Cutting mat = None
Send Settings: Pop-out Cut Edge, Cardstock Plain, Auto (Pop-out Cut), Autoblade
I have also updated my feed settings like you have shown
Any ideas?? Help! Thank you 😊
Hey Jade! I'm so glad you enjoy the videos. I'll be honest, I always cut my cardstock with a mat. I know there is a relatively new mat free cutting for cardstock but I haven't tried it yet. Maybe that is a new video I need to record. I do believe you need to select the Pop-out cut settings for the matless setting to work. Hope this helps! ---Becky
@@DesignBundles Thanks Becky 🙂 I am maybe trying to run before I can walk, so I’ll try again tonight but I might stick to using my mat in the meantime...I’ll keep my eyes peeled for a Design Bundles cardstock matless cut video though 👀 thank you ✨
my cross cutter seems different that yours. if i lower the tabs there is no way the vinyl can come out. so i have to wait until i've finished cutting, then lower the tabs for the cross cutter. ???
Hi there. Is there any benefit to using the ratchet attachment? Does it do finer and more intricate cuts as opposed to the autoblade? Thank you
Hi there! That depends on what machine you have. The Ratchet works with all machines where as the Autoblade is only Cameo 3 compatible.
It has happened to you that in the cameo 4 when using the cutting program it says to check the cross cutter
Hello, thanks so much for that! My vinyl does not seem to go out the back to be trimmed it goes back to the starting position and the only option I have is to then press the unload button. Do you know what I may be doing wrong?
Hey Linda, there is a part in the software that you have to activate for it to feed through the back after cutting. Check out the video at the 1:50 mark and you'll find where the setting is. Hope this helps! ---Becky
Hey Becky,
Where did you get your clear shelfs from? I need to get something like that for my office space.
Hey there! I'm sorry to report that the glass shelves were purchased from a local retail store that was going out of business. I'm not sure where they come from originally. Sorry I can't be of more help! ---Becky
@@DesignBundlesThank you! I love your videos. I'm learning as I go so please keep posting.
what is the brand and color of your vinyl? it is beautiful. And i love all your videos. :)
Thank you Waiyi! This brand is TechWrap, you can find it on Amazon, they have beautiful colors. See you again soon! ---Becky
Hello. Just got my cameo 4 yesterday. Can you tell me your settings for cutting on the computer? Sometimes mine goes too deep then sometimes, it doesn't even scratch the vinyl. I have been using the mat but it sticks the underneath of the vinyl off and it ruins the paper for peeling
Hey there! When I cut vinyl with or without a mat, I just use the presets for Vinyl, Glossy in Silhouette Studio. If you are having trouble using a new mat, you can take a shirt or towel and press it against the sticky side, that will make it less sticky for you. Hope this helps! ---Becky
Thank God for our videos or I would know nothing. Do you have anything that explains what the force is or blade # means?
Thanks Susan, I am glad you are enjoying the videos. I don't have anything on those specifically, but I do have a video on helping when you are having trouble cutting, and I believe I talk about these two items, I'll link it below. But the blade number is the actual depth of your blade that is adjusted on the blade itself. If you have an autoblade, the machine will do this for you. The force is the downward pressure of your machine. It usually takes a combination of the two to determine the correct cut settings. Hope this helps! ---Becky
czcams.com/video/sla2hHp_y3Y/video.html
@@DesignBundles you are a rockstar - thank you!!!
So what should you set for the feed distance for any project to use the cross cutter? I am about to cut a 23" long project and wanted to feed it to cut close to the bottom of the project. Just not sure how much I should feed it.
Hey Ron! After this experiment, I decided that feeding it manually would be best because I'm too afraid to cut off the end of my design 😂 I'll play around with it some more and let you know if I get an accurate measurement. Hope this helps! ---Becky
@@DesignBundles I had heard 4" was the magic number, but then someone else said it was too much, so 3" gets it close and then you have to manually get it "perfect".
Hey Becky I see that Cameo 4 has the deep cut blade; does that mean it can cut wood?
That is a very good question and the tentative answer is yes. But we are not talking about "real" wood, it has to be very soft such as balsa wood. I'm preparing a video for you guys, so stay tuned! ---Becky
New to silhouette from Cricut and when I cut without a mat it's not cutting through very well. Almost as if the blade was dull but I've only done a handful of cuts on it. Should I adjust the force higher? Or the number that looks like a dial that is also on the autoblade itself?
Hey Karla! I would personally start by increasing the force a little at a time, cutting small designs so you don't waste a lot of material. You can adjust the blade, but it is a bigger "jump" so to speak, and can cut through your material. Hope this helps! ---Becky
@@DesignBundles thanks so much for your reply! ❤️ I usually cut on "more" pressure when I was using cricut. So I think I was just used to super easy weeding. I also was switching between Amazon bought vinyl with thicker backing and the stuff I'd pick up from hobby lobby for short notice stuff so that could have a lot to do with it too. I tried 20 force and it still was a hassle to weed so I put force back to 10 and upped the blade to 2 - and that worked great! 😊
I have a question, so i have been working with my cameo 4 for about 2 months now but i have one big issue, whenever I cut without a mat the vinyl bunches and destroys the image. Why does that happen?
Hey Danni! It sounds like your vinyl may be getting jammed during the cutting process. Make sure the vinyl is flat when all possible and that it isn't curling up into the machine anywhere. This was especially common for me with the Cameo 3. Hope this helps! ---Becky
What cutting settings should I use? I'm use number 1 blade depth, force 3 speed5 and it's cutting through
Hey Juan, if the blade is cutting all the way through on a depth of 1, I would turn it down to 0. Each blade is a little different and the new blades can be super sharp. If you're using an auto-blade, make sure the machine is adjusting it correctly as that could be an issue also. Hope this helps! ---Becky
@@DesignBundles thanks one more question, how do you sublimate ontop regular htv and permanent vinyl
If I'm a casual user of my Silhouette 3, are there enough benefits to upgrade to the 4? I'm trying to look at things logically, but it's so pretty that it's blinding me!!
Great question! I would say no, not as a casual user. The pretty machines are very tempting, but unless you need to use the rotary blade, the knife blade, or want to explore new materials (all very fun, of course), your Cameo 3 will cut vinyl, cardstock, paper and fabric just as well as a Cameo 4. Hope this helps! ---Becky
@@DesignBundles Thanks, Becky! Yes, my 3 does all I need it to do. I really appreciate the definitive response. If I ever have a few hundred dollars to spare (because that totally happens, right?), I might upgrade, but until then, I'll stick to my Cameo 3!
This is an amazing tutorial! Can you cut without a mat with a Cameo 3? I find that I am constantly needing to replace my mats.
Hey Nichole! You definitely can! The process is the same, it's just a little different to move your rollers over. Hope this helps! ---Becky
How do I change my print border? I'm using the basic edition and a cameo 4 it will only let me print an 8*11 space I've tried without a mat and page settings nothing is working please help
Hey Deandra! Your printer boarder is picking up on the settings of your printer. So if you go to the Print function (like you would if you are trying to print), choose your printer and click on "Preferences" (I'm on a PC) then you can select different pages sizes, etc. Hit Apply then Cancel and your new Page Border should adjust. Hope this helps! ---Becky
I got free outdoor vinyl with my new cameo 4 and I can't seem to cut through it at all 😂 I've been experimenting and finally got it to cut on the mat on number 3, 30 force, 4 speed and 3 passes. Cut right through to the mat but it's the first one that actually went through the material using the autoblade. I'm heartbroken for my cutting mat haha what on earth is wrong with this outdoor vinyl?
Hey Eveleen! Sorry to hear you are having trouble cutting. Normal "outdoor vinyl" should cut fine, but I have a video on helping to trouble-shoot cutting problems on your Cameo that may help, I'll link it below. Hope this helps! ---Becky
czcams.com/video/sla2hHp_y3Y/video.html
Hi Becky, thanks for responding to my query. I did get to the linked video eventually and found that my blade wasn't loaded properly and wasn't changing depth automatically. Issue has been fixed, thanks to your video 😍😄
Hello..is it okay to cut photopapers w/cutting mat?
Yes you can cut them with your mat!
Ive tried cutting with out a mat with no luck. It keeps going side ways. Would the settings cause problems. Im cutting htv on b3 f15 sp 4?
Hey Samantha! If your vinyl is going sideways, it means your vinyl is coming lose for some reason. I would first check to make sure your vinyl is tucked under the roller nice and tight (give it a tug after loading). Then watch the right side as it's cutting (that's usually the problem side) and see if it is coming lose during cutting, could it be that the vinyl is loaded at a slight angle? See if any of this helps and if you need more troubleshooting ideas, let me know! ---Becky
I've had this issue and find that it happens when I've accidentally not lowered my roller down (after adjusting the little stops). Once it's lowered again, it feeds just fine. Have you checked that?
can i use a 12.5 inch wide vinyl for cameo 4?
Hey Joemari, it should technically fit through the machine, but your cutting area will still need to be within the 12" wide rollers. Hope this helps! ---Becky
How do you feed the paper all the way thru?
Hey there! You can hold down the down arrow keys on your machine to nice the material back and forth manually. Hope this helps! ---Becky
Hi. Is it okay to cut vinyl without registration marks?
Yes, that is ok 🙂
So can you cut 12x12 HTV sheets without a mat.. or do you suggest using a mat?
You sure can, it's fantastic! Just make sure you remember the small amount of material you lose at the end. Hope this helps! ---Becky
@@DesignBundles thank you! I'm new to all this but I'm learning fast.. I'm an artist, I do a little bit of everything.. I'm excited to add all this to the arsenal! Thanks Again 💜
What is the minimu wide we can cut matless?
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
🎄 Dive into the festive spirit with Alpha DTF Print's UV DTF Christmas prints! Any recommendations for incorporating UV printing into holiday decorations? Share your ideas! @AlphaDTFPrint
Do you prefer the Cameo or Cricut best?
That's a very complicated question LOL. I do think I'm partial to Silhouette Studio, I think the software is very robust and more functional than Cricut Design Space. However, once I purchased a Cricut, I actually think it has better cutting results, but only by a smidge. I usually recommend potential buyers to download the software for each and see which one feels more natural. Hope this helps! ---Becky
I have the Cameo 4 Pro and I have wasted so much material because my mat continue slip and my vinyl folds under the roller...😩😩😩 It’s so frustrating. Help!!
Hey Erica! I'm sorry to hear about your trouble cutting. Have you checked to see how tight your roller is locking down. When the bar is locked, you shouldn't be able to move your mat at all. If it's lose or is coming lose during cutting, I would contact Silhouette America's customer support for a warranty claim. Hope this helps! ---Becky
I did everything 100% exactly how you said and my blade doesn’t cut. You can barley see a small indent but it never cuts the whole way. I know it’s not a defect because this is the second Cameo 4 I got. What am I doing wrong?
Hey Anthony! Sorry to hear of your trouble. I have a troubleshooting video that may help, but it sounds like your blade to be honest. Hope this helps! ---Becky
czcams.com/video/sla2hHp_y3Y/video.html
Thank you!
Just a tip. . . next time Edit with headphones on, duplicate your audio and on the duplicate put the sound on the right side with the little siliding button. . and you get stereo sound. .
Thank you for the tip!
I can't do that bc it always says something about reg marks
Oh no! What is it saying and are you trying to print and cut or just cut? - Brittany
for the life of me I can not see the feed option anywhere to change it. I have been trying to cut off the mat and watched numerous tutorials and it still slides all over:(
Hey Paulette! I'm sorry to hear about your troubles. Definitely check your roller bar (make sure it's locked) and your roller (make sure it's not coming out of place). The Cameo 3 models had a batch or design flaw where the rollers would come out of the slots when the machine was in use, so many crafters glued or taped the roller in place. Hope this helps! ---Becky
All I want to do is craft but I cannot figure this whole software thing out... :(
Silhouette studio is definitely a learning curve Try this video czcams.com/video/_PjXeP8k-EM/video.html
I thought you have to mirror the image and have shinny side facing down??
Hey Katlynn! You only have to mirror and place the vinyl shiny side down if you are cutting Heat Transfer Vinyl. Hope this helps! ---Becky
I had no idea there was even a cross cutter on my cameo LOL
Lol well we're glad you found us and learned something new! - Dawn
My silhouette won’t cut it😭 I followed everything u said but it’s not cutting😖😖😖
Hey Ruby! Can you tell me a little more about what it's doing? I also have a little troubleshooting video, it's for the Cameo but the same principles work for the Portrait. Hope this helps! ---Becky
czcams.com/video/sla2hHp_y3Y/video.html
I finally got it to load but it didn’t cut anything
Hey there! Can you tell me more about what is happening? I'd love to help if I can! I'll also link a video I have on troubleshooting tips down below. ---Becky
czcams.com/video/sla2hHp_y3Y/video.html
@@DesignBundles I was having a hard time loading it properly so it won’t slide. I think I got it down. Now I’m just learning when to apply different cut settings. Thank you.
Why in heavens name is mine sliding all over and screwing up? I'm going to have to video it so someone can tell me what I'm doing wrong! 🤪
*Attempts to cut a vinyl without mat and not watching a tutorial because I had a Cricut and I can do this!*
*Cameo starts cutting incorrectly, I start laughing, fiancé shakes his head*
*Come back to Becky with tail between legs*
Hey, at least I got a good laugh about it!
Hey, we're always happy to help! :)
This didn’t help me at all
Sorry to hear that. Do you have questions or is there something in particular you are looking for? ---Becky