Thanks a million! I watched many others and couldn't track the sides as they moved and morphed. You made it clear how to remain oriented mentally and that was the breakthrough!! Getting the cross, handling the PLL and OLL stages are much clearer now.I even solved my megamorphix (4x4) immediately afterward. Much gratitude!!
10:53 I have 2 of them in the wrong place😪, this also happens pretty often with my 4x4x4, but I just start again cuz that one makes more sense and it's the first time solving a mastermorphix thingy
I'm sure there are other identical comments, but it's easier to just solve like a normal 3x3 then fix the centers. Algorithms for orienting picture cube centers can be used.
On the last layer two of the middle pieces are solved and two are not no matter how many times I do the last algorithm so should I just start over or is there a better way to fix that?
There are moments in this video where you seem to gloss over algorithms, and present the cube in a confusing manner. But thanks for helping me figure out my cube. I find that learning how to solve this particular cube gave me a better visual understanding on how to solve a 3x3 cube.
My oll case is different, it has both the bottom green and the bottom yellow in the right place. But the top green and top yellow is in the wrong place in both orientation and position, what do I do in that case?
Depending on which way the center is flipped 90 degrees, you can position the cube so that the messed up center is on the right side, and do the moves: R2 U, then either R or R’, then U’ R2. That will solve the center. Now u just have the middle edges to solve then the last layer
I need help. When I am at the 3rd layer and I am trying to make everything flush it's like no matter what I do I always have 1 that is flush. Is there an algorithm or some trick that can be used to make just 1 edge flush on the 3rd layer.
Ok that means that it is unsolveable in that state. You will have to take that piece out, flip it, and put it back in. It’s the same thing as on a 3x3 you have the whole cube solved except one edge is flipped
Thank you. I have been stuck there forever, and I probly should have of figured that it was something like that. Thanks. BTW your video was very helpful.
honestly need more explanation on how to connect edge pieces to corners, got lost there and completely fumbled up my triangle, seems kinda impossible to find a guide out there that shows the basics with explanations like there are for the 3x3; not everyone knows speedcubing terms or how to speedcube solve the 3x3, especially not one where the centers move; i got lost & will find another video to watch that is hopefully a bit clearer in what it is i should be moving where. every turn i make seems to just make the cube more morphed than what it was previously.
The tutorial is very helpful, but I am stuck on the last layer, when the cross is complete but the centre is not aligned properly(it is flipped), plz help me out with this, Thanks!
When u get to the last layer the first thing to do is rotate the layer so that the center is solved. Then u have to cycle around the edges to put them into place without messing up the center. You can do this with the sune algorithm.
HyperCube Ooh, i never thought of that😁 My mastermorphix was lying unsolved for last 6 months since I got it. Your tutorial made me solve it easily😁😁 Tysm😁 I never thought of searching for a tutorial, idk why..😁 n i subscribed 😁😁
I have a problem with the last layer When I need to cycle the corners for some reason there are 2 solved. I do the algorithm and then there is still 2 solved. Any help? Also how to fix the centers
If u don’t have the centers solved it is causing a parity that shouldn’t happen which makes 2 corners switch places. This cube doesn’t solve the exact same way as a 3x3. As you go through the method you need to solve the centers as you go along. I forget how I showed that in the video, but the best thing to do is before u start to solve, rotate the centers so that they each have the correct half center color facing each other. Once you have that, you need to make the cross and keep those centers like they are. Watch how I do it closely
Make sure that you are flipping the edges to the correct side up. Focus on the algorithms and repeat them when necessary. Also make sure when u get to the corners that you do not rotate the puzzle, only turn the top layer to get the corner that needs to be flipped in the correct place. Hope this helps a little
I have a question, solving the last layer, My yellow center is vertical instead of horizontal, but all the edges are correct, just except the center it is vertical
Try doing the sune alg while having one of the solved edges in front. This will move the edges around. Then you will have to use the alg that flips the edges around. Experiment with the different algs and practice what they do to the edges.
Hey, is it possible to rotate only one of the cross pieces (the longer, trapezoidal ones)? like, mine has literally only one piece rotated wrong, and it's not one of the corner pieces. I don't know if it's possible or if one of my siblings somehow broke/turned something that wasn't intended when i wasn't looking. I've tried scrambling it again but the case si always the same. I don't know how to describe it in a better way, i finished the solve with only one of the cross pieces wrong. I'd appreciate a lot if someone could help.
@@nicnapier thanks! It was scary, but I managed to take the piece out and put it back on the right way. After fixing it my sister confessed that our little brother had hit it on the ground and a piece came out. She just put it back in oof. Thanks acai for the help!
I wanna buy this cube,it doesnt cost that much but its around my budget so im afraid that i will not be able to solve it, i know to solve basic cubes 2x2 3x3 and 4x4 but i wee never salved other cubes,should i buy it...?
My second layer is not solving and my master morphics cubes l get the mistake that is when l go to second layer but that little corner not goes on their correct place please tell me how to do it
Once you have solved the cross on bottom, then solve the 2 small corners and 2 bigger corners. Then solve the middle edges to complete the 2nd layer. The method is the same as the cfop method on a 3x3.
It says this is the beginner method, but when solving the top layer you start with an algorithm I've never seen before? What beginner method is this based off of?
This is based of the actual beginners method of a 3x3. CFOP is the normal method, but that won’t work with this cube because the centers have to be orientated.
After you get the cross, make sure that the centers that are attached to those edges are flipped right. The next step is to solve the corners on the first layer. Whichever side you solved the cross on will be the corners you are looking for. Position the cross so that it faces the floor when you try to solve the corners
putting off learning 2nd and 3rd layers for now. gonna keep practicing first layer for the time being. god, the way this "cube" morphs is giving me a headache.
Very nice tutorial. Extremely helpful. I am able to do mastermorphix now thanks to you and other good tutorials! I have a question. What camera setup you use for your video recording? Quality of the video is very good with good positioning of the cube with minimal jerkiness in the recording. Thanks again!
That alg is the normal alg to insert an f2l edge. If the edge is going to the right: U R U’ R’ U’ rotate the cube to the right then L’ U L. If the edge is going to the left: U’ L’ U L U rotate left then R U’ R’. Hope this helps. Let me know if u need more help
Make sure that you have the centers turned correctly when you finish the cross. The reason they might get turned is due to the algorithm to insert the middle edges. Use the basic algorithm that I use in the video. Hope this helped
I got this for Christmas and it's so God damn frustrating. I want to throw it out a window. I can do the second layer but the second is the part that makes me so angry. I can solve a normal 3x3 puzzle in around 40 seconds. Any help to defeat the 2nd Boss?
Up until the last layer it solves the same way as the 3x3. The last layer solves like the beginners method. You could think of it like that. I admit it is a difficult puzzle at first but soon it will be easy to solve. 👍
Now I know what this Rubik's cube name. i always search for like " pyramid with soft edge Rubik's cube"
Sameee... I used to search it as "pyramid with curved edges"😂😂
@@saiswapnachakraborty4567 yeah wth XD
I searched "triangolar cube that changes form rubik"
Same bro
I always have it lying on my desk and search for ot and never find it
a big thanks to you! with your tutorial I managed to solve this cube from hell 2 years after I got it
I can solve the 3*3*3 in 16 seconds and mirror cube in 1min but this thing is really really mind destroying!!!! 🤔🤔
Yes correct me too can solve the others but not this
Got one this christmas. Been struggling solving the last layer. THANK YOU SO MUCH
same
Oh my god, this is SUCH a good tutorial! I can solve my 3x3 with beginner's method and you explained so well how it works for this one!
This is in fact an excellent video. I learned from this video how to solve the last layer. Very logical approach, easy to follow, and more like 3x3.
really awesome tutorial! finally solved my mastermorphix!
Thanks a million! I watched many others and couldn't track the sides as they moved and morphed. You made it clear how to remain oriented mentally and that was the breakthrough!! Getting the cross, handling the PLL and OLL stages are much clearer now.I even solved my megamorphix (4x4) immediately afterward. Much gratitude!!
Awesome!
ive had mine for about 2 years and always had issues with the last layer, Thanks a lot!!
Thank you! It took me a few hours watching this on repeat and another day for it to sink in haha
Yeah it can be difficult at first. Good job 👍
I still haven't
@@lucapinardi3194 it's just a 3x3, takes a bit to understand.
Looking at this - I am wondering if using a version of the 3x3 corners-first method might be easier.
Thank you so much, best tutorial ever!
Thank you so much nick I solved the master mophix inside 2 weeks
10:53 I have 2 of them in the wrong place😪, this also happens pretty often with my 4x4x4, but I just start again cuz that one makes more sense and it's the first time solving a mastermorphix thingy
I just want to say: ‘Thank you!’
😁👍
What can he say except YOUR WELCOME!
I'm sure there are other identical comments, but it's easier to just solve like a normal 3x3 then fix the centers. Algorithms for orienting picture cube centers can be used.
Solved mine thx for the help👍
Very good tutorial, thankyou so much!
On the last layer two of the middle pieces are solved and two are not no matter how many times I do the last algorithm so should I just start over or is there a better way to fix that?
wow nice puzzle...and your videos too👍🏼👍🏼👍🏼👍🏼thank you man...
THxxxxx Brooooooooooooooooo I finally got it after lot of struggling.
Thx a lot again.
Your cube makes a satisfying sound, I wish mine did the same😅
I'm just sitting here staring at it, i need a person that explains EVERYTHING in detail please
Me too
Ssaammee
Thanks, really helped me!
Cheers👍
There are moments in this video where you seem to gloss over algorithms, and present the cube in a confusing manner.
But thanks for helping me figure out my cube. I find that learning how to solve this particular cube gave me a better visual understanding on how to solve a 3x3 cube.
Classic 👌
thanks once you explained EO then i managed to do a u perm then just do a perms to solve it :)
How do I solve it when on last layer there are 2 corners that are right and 2 corners that are wrong?
Thanks a lot for this video
Thank you for the great video1
Best tutorial for this cube I've seen. I've been able to solve it before, however this is simple and the solve actually makes sense in my head now
My oll case is different, it has both the bottom green and the bottom yellow in the right place. But the top green and top yellow is in the wrong place in both orientation and position, what do I do in that case?
how about in the middle layer, only one center is flipped 90° what should i do?
Depending on which way the center is flipped 90 degrees, you can position the cube so that the messed up center is on the right side, and do the moves: R2 U, then either R or R’, then U’ R2. That will solve the center. Now u just have the middle edges to solve then the last layer
Thank you for notation. Sets your vis above the rest.
2:22 but how do i oriantate it?
Same way as a regular 3x3, take it out, turn in to another point you can insert from, then insert from there
@@dylster2662 you dont have to orientate a 3x3
@@thosediamonds
Orientate it before the cross,
@Oliver Ramén
Read my other comment
Thanks mate! Can solve it now.
Liam Thompson: "Almost triangular cube"
lol yeah
Thanks bro
hello, i have a problem with the 3rd layer, and i suspect it's my cube problem. can u help me check? but idk how to insert picture
I solved it thanks you so much
I did it! Thank you.
😁👍
yeah it is so good i subscribed you. you are the best to solve cubes
It works thx but i watched it kinda in like 0.2x speed for algs
When solving oll what if you have that edges solved but two of them have incorrect colours
I can solve a 3x3 in 2min but that doesn't help much when try it to solve this
The main thing for shape mods is that you have to realize what pieces act like the pieces on a 3x3. It will be hard at first to wrap your brain around
@@nicnapier I can get my head around it but when I re align the centers the edges get messed up
You have to align the centers first. Then u have to insert the edges
@@nicnapier that's what I do but when I insert the edges the centers get move around
You have to figure out a way to insert them and keep the center oriented
Hey, what is the 'other' algorithm at 8.27?
I need help. When I am at the 3rd layer and I am trying to make everything flush it's like no matter what I do I always have 1 that is flush. Is there an algorithm or some trick that can be used to make just 1 edge flush on the 3rd layer.
So u have the first 2 layers completely solved and then you have 3 edges solved on the top with 1 that is flipped?
Yes. 3 are flushed and 1 is flipped.
Ok that means that it is unsolveable in that state. You will have to take that piece out, flip it, and put it back in. It’s the same thing as on a 3x3 you have the whole cube solved except one edge is flipped
Thank you. I have been stuck there forever, and I probly should have of figured that it was something like that. Thanks. BTW your video was very helpful.
Glad I could help 😁👍
thank youu
How are you doing from 2nd and 3rd layers I don't understand can you say
Best video
How do I do the cross, I don't get it
I dont understand in the third layer which is the frontal layer. I really need help with that.
Which mastermorphix cube you use?
i don't understand rubix cubes and my friend bought me a few. Good video but I never get used to rubix cubes.
what cube are you using?
honestly need more explanation on how to connect edge pieces to corners, got lost there and completely fumbled up my triangle, seems kinda impossible to find a guide out there that shows the basics with explanations like there are for the 3x3; not everyone knows speedcubing terms or how to speedcube solve the 3x3, especially not one where the centers move; i got lost & will find another video to watch that is hopefully a bit clearer in what it is i should be moving where. every turn i make seems to just make the cube more morphed than what it was previously.
The tutorial is very helpful, but I am stuck on the last layer, when the cross is complete but the centre is not aligned properly(it is flipped), plz help me out with this, Thanks!
When u get to the last layer the first thing to do is rotate the layer so that the center is solved. Then u have to cycle around the edges to put them into place without messing up the center. You can do this with the sune algorithm.
HyperCube Ooh, i never thought of that😁
My mastermorphix was lying unsolved for last 6 months since I got it. Your tutorial made me solve it easily😁😁
Tysm😁
I never thought of searching for a tutorial, idk why..😁 n i subscribed 😁😁
Thanks glad I could help 👍
I have a problem with the last layer
When I need to cycle the corners for some reason there are 2 solved. I do the algorithm and then there is still 2 solved. Any help?
Also how to fix the centers
If u don’t have the centers solved it is causing a parity that shouldn’t happen which makes 2 corners switch places. This cube doesn’t solve the exact same way as a 3x3. As you go through the method you need to solve the centers as you go along. I forget how I showed that in the video, but the best thing to do is before u start to solve, rotate the centers so that they each have the correct half center color facing each other. Once you have that, you need to make the cross and keep those centers like they are. Watch how I do it closely
When I tried doing the oll algorithm I think it wasn't center piece s weren't matching
Make step by step video of this also give us a scramble and use that scramble yourself so we and u have the same scramble that would be easier
Last layer thanks for Reading the coments
Make sure that you are flipping the edges to the correct side up. Focus on the algorithms and repeat them when necessary. Also make sure when u get to the corners that you do not rotate the puzzle, only turn the top layer to get the corner that needs to be flipped in the correct place. Hope this helps a little
I just need to swap 3 corners clockwise to finish. (2 big corner, 1 small corner)
Help me
I have a question, solving the last layer, My yellow center is vertical instead of horizontal, but all the edges are correct, just except the center it is vertical
You have to solve the edges around the center meaning if the center is not turned right, none of the edges are truly solved.
@@nicnapier thks 😊
Yay,I solved it
Good job!
I’m stuck on the middle layer because I can’t tel what the notation on the cube is it’s super confusing.
On the 3rd layer at 10:10 the edges are in the correct flushed but not oriented right. What do i do?
Try doing the sune alg while having one of the solved edges in front. This will move the edges around. Then you will have to use the alg that flips the edges around. Experiment with the different algs and practice what they do to the edges.
@@nicnapier yooo it worked thanks
Hey, is it possible to rotate only one of the cross pieces (the longer, trapezoidal ones)? like, mine has literally only one piece rotated wrong, and it's not one of the corner pieces. I don't know if it's possible or if one of my siblings somehow broke/turned something that wasn't intended when i wasn't looking. I've tried scrambling it again but the case si always the same. I don't know how to describe it in a better way, i finished the solve with only one of the cross pieces wrong. I'd appreciate a lot if someone could help.
That would be an edge piece that needs to be taken out of the cube and flipped around and put back into the puzzle.
@@nicnapier thanks! It was scary, but I managed to take the piece out and put it back on the right way. After fixing it my sister confessed that our little brother had hit it on the ground and a piece came out. She just put it back in oof. Thanks acai for the help!
Lol. 😂👍
I wanna buy this cube,it doesnt cost that much but its around my budget so im afraid that i will not be able to solve it, i know to solve basic cubes 2x2 3x3 and 4x4 but i wee never salved other cubes,should i buy it...?
It will be a little difficult at first but I think it is a really fun puzzle. It is definitely worth buying. Supercubes are my favorite kind of puzzle
You should buy windmill cube
Ok i can solve the 3x3 but on this i can't make the cross without ruining the centers
I scrambled my friends mastermorphinx one time and he was pissed 💀
my friend mixed my mastermorphix I was so mad lmao
My second layer is not solving and my master morphics cubes l get the mistake that is when l go to second layer but that little corner not goes on their correct place please tell me how to do it
Once you have solved the cross on bottom, then solve the 2 small corners and 2 bigger corners. Then solve the middle edges to complete the 2nd layer. The method is the same as the cfop method on a 3x3.
But how
Please can you give me your phone number😳😳
Do you want to be my frienr
Friend
Please tell me how to solve centre piece of
master morphix
Thank you. I did it 👍🏻
It says this is the beginner method, but when solving the top layer you start with an algorithm I've never seen before? What beginner method is this based off of?
This is based of the actual beginners method of a 3x3. CFOP is the normal method, but that won’t work with this cube because the centers have to be orientated.
@@nicnapier Oh, hm. Then can you link me to whatever method your using because apparently whatever I'm using isn't standard.
so mucr for a EASY METHOD
Are there actual algorithms for this solve? Im lost 😊
Yea, all the 3x3 algorithms apply to this
Ljyu
Is their any app to learn this
I'm not able to proceed after the cross.
I can solve 3×3 under a minute . Will it help?
After you get the cross, make sure that the centers that are attached to those edges are flipped right. The next step is to solve the corners on the first layer. Whichever side you solved the cross on will be the corners you are looking for. Position the cross so that it faces the floor when you try to solve the corners
Thanks for a quick reply and helpful reply. 😀
Great video, helped me learn instantly
Thank you. Glad it helped 👍
This this this yhe very good tutorial i only heard this this flip this so this is this like this😑😑😑😑😑😑
And this
He's not explaining anything, just showing it.
What do you mean, this tutorial is completely understandable, either ur deaf or just joking
@@derichestt im deef
U can hear that or u can hear "U R R U' L' R U' R......." no thank u!
I have problem..Please Help me.....i cant solve the step 1 causei cant put the 3 centers correctly...please help
I don't have that cube , but still nice video👍
Thanks. You should get one, it is fun
It's not a cube
how do you do F and f
Is this wca? If not it really should be.
I use the beginner's 3x3 method, but keep ending up with one centre flipped 180°
Z3 cubing has a vid for that
@@woodenfloor9182 That may have been the one I found sometime in the last 9 months!
Stupidly easy once you know...
putting off learning 2nd and 3rd layers for now. gonna keep practicing first layer for the time being. god, the way this "cube" morphs is giving me a headache.
At 5:48 i didnot understand what you did can you help me in this step more please!!
Very nice tutorial. Extremely helpful. I am able to do mastermorphix now thanks to you and other good tutorials! I have a question. What camera setup you use for your video recording? Quality of the video is very good with good positioning of the cube with minimal jerkiness in the recording. Thanks again!
I’m glad I could help! Oddly enough I use my iPhone 7 on a cheap tripod. I use 2 led desk lamps for lighting.
I didn't understand at 6:20 can you help me please? With that alg?
That alg is the normal alg to insert an f2l edge. If the edge is going to the right: U R U’ R’ U’ rotate the cube to the right then L’ U L. If the edge is going to the left: U’ L’ U L U rotate left then R U’ R’. Hope this helps. Let me know if u need more help
@@nicnapier thanks! A lot
Vaiiii cagaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaáaaaaaaaaaaaaâäæaaaaaaaaaáaáaaaaaaaaáááaáaaaaaaaaaaáãà
When i finish solving the edges on the second layer, all the centers are rotated. What should I do?
Make sure that you have the centers turned correctly when you finish the cross. The reason they might get turned is due to the algorithm to insert the middle edges. Use the basic algorithm that I use in the video. Hope this helped
I’m on the last layer and The middle piece is 90 degrees the wrong way but everything else is solved
100% working
I have with the last edges only 2 solved and I can’t get them all
I had a problem in solving the edges in last layer
I solve 3x3 in sub 30 and 4x4 in 2 minutes but this even though it is close to the 3x3 I still take more than the 4x4 🥶🥵😕😉
I got this for Christmas and it's so God damn frustrating. I want to throw it out a window.
I can do the second layer but the second is the part that makes me so angry. I can solve a normal 3x3 puzzle in around 40 seconds.
Any help to defeat the 2nd Boss?
Why you so salty Haha same, I just got it and I’m trying to learn how to solve it
Same here lol i got it for christmass too. I have 3x3 and master morphix and i ordered today 2x2
Up until the last layer it solves the same way as the 3x3. The last layer solves like the beginners method. You could think of it like that. I admit it is a difficult puzzle at first but soon it will be easy to solve. 👍
I can't even do the first layer :)
Lol Rip
I can solve 3x3 in 40sec and pyraminx in 8 sec but unable to do anything in the first step
I almost knew every cube 29approx but this was a bit of difficult
bro how do solve second layer if the 2 colored peaces are wrong wtf
i still cant do it the last step i get like a different cases than urs