Quick Restoration of Klein Linesman Pliers

Sdílet
Vložit
  • čas přidán 23. 07. 2024
  • Today we do a quick clean-up of a pair of Klein Linesman Pliers I bought for Two dollars at the flea market. They were unusable as bought and after about twenty minutes of labor they now work as good as new...
  • Zábava

Komentáře • 202

  • @u15GummiBear
    @u15GummiBear Před 6 lety +5

    I've carried Klein tools since I started in the trade 24 years ago. They're top notch.
    I like your procedure, and it makes me feel better that I'm not the only guy that buys flea market tools and cleans them up. I've even cleaned up and returned to service a bunch of old tools that belonged to my Dad and both Grandfathers. It is a sense of accomplishment.
    One thing on the pliers though: I don't particularly care for the plasti dip handles, so I cut them off, and replace with the Klein Koat handles. That's what I'm used to, and what I prefer on mine.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Gummi Bear! That's so funny you mention that because I just ordered a pair of the Klein Koat handles for a upcoming video on plier handle replacement options! The dip is an inexpensive option for the company... Some dips are better then others... That is awesome that you restored your Fathers and Grandfather's tools! They are always the best! Thanks very much!!!!!

  • @josemonte495
    @josemonte495 Před 6 lety +4

    I recently discovered you and your wonderful restoration variety. Sir! you got me hooked!!. I am reaching my retirement at age 70 and now believe I have found my next chapter to keep me busy. I am just a weekend fix up guy so I have a lot of tools that have been ignored for years. So I am now going through my worst tools. Looking forward to continue watching your awesome restoration projects. Thanks so much for sharing your knowledge, techniques and restoration wisdom. God Bless

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Jose! Congratulations!!! Retirement is awesome!!! You are going to have a lot of fun fixing up the old tools! We have a great bunch of guys here and everyone has great tips and tricks!! You can make some extra money selling the restored tools too! Thanks for checking in!!!! Again Congratulations on your retirement!!!!!

  • @allen2905
    @allen2905 Před 6 lety +6

    until I found your channel I was about to throw out many of my dad's tools I inherited. most were, at least I thought, were beyond use. I admit that I have been careless with them. You have given me a desire to bring them back "alive" to remember watching my dad use them. before i tackle any restoration on them I'll peruse your older videos. thx again for your channel

  • @ricksundberg5659
    @ricksundberg5659 Před 3 lety +2

    Quick and easy repair of a $35-$45 set of Klein linesman pliers. After looking at 20 videos this is the first I'd say is really good value to labor effort and cost of repair.

  • @tokesnationpropagandaminis1665

    A friend of mine restored a screwdriver to absolute better than new perfection… he put a mirror finish on it, and a beautiful timber handle that was as shiny as anything. And then seriously, he used an old crappy screwdriver because he didn’t want to wreck his pretty one!! there’s definitely a lot to be said for an effective and solid resto, but not making it a work of art to be admired and not used. Excellent job. 🏆

  • @barryhunt5357
    @barryhunt5357 Před 6 lety +2

    Great Score , that's about a 40 dollar pair of Klein's these days .I mixed up my first batch of Acetone and Trans fluid Sunday , it worked like a charm , I freed up a Mule Drive clutch lever for a 74 Sears Suburban garden tractor I'm working on , it had been out in the weather for over 15 years , and wouldn't move , after an hour it freed up , I took it apart and cleaned , primed and painted it , Thank You for the videos !!!! I enjoy them all .

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Barry!!!! That is awesome!!! That penetrating mix is fantastic! The only thing is remember to shake it before every use, the Acetone and Tranny fluid seem to separate... Those vintage garden tractors were built to last! I have a sweet '63 Cub Cadet Original... Thanks very much!!!!!

  • @loganunderwood4589
    @loganunderwood4589 Před 4 lety +2

    Love digging up and restoring good oldies !

  • @novazo1
    @novazo1 Před 4 lety +2

    I found some old Klein's Linesman's in my laundry room last month. They were somewhat rusted, not as bad as the ones on here but I showed my coworker them and said he'd fix em up for me. And man, what he did to them, he made them look like they had a chrome finish and they looked so nice and you could still see the logo on it too!

  • @farmerdave7965
    @farmerdave7965 Před 5 lety +13

    I was out digging in the yard and I dug up a genuine Crescent wrench that had apparently been buried for years. I sand blasted it and wire brushed it and soaked it in a can of WD40 for a couple of days , and since the chrome plating was destroyed, I painted it. I got about a year of good use out if it. Then the knurled adjustment knob fell out due to the knob shaft being rusted through. These tools have a lifetime guarantee and I brought this tool to the Crescent dealer and they gladly exchanged my broken tool for a new one.
    Yay Crescent tools !!!

  • @danielgrenier3288
    @danielgrenier3288 Před 6 lety +2

    I'm happy to have found your channel. So much great information in a fun format... Your appreciation for tools is contagious. Thanks so much for sharing, ScoutCrafter!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Daniel! I'm glad you are enjoying the videos! You can acquire a really nice set of tools very inexpensively if you know the "secrets" of restoration!!!! We can save a lot of them from the trash! lol Thanks very much!!!!

  • @danielguadian2716
    @danielguadian2716 Před 6 lety +1

    Very nice video & tips Scoutcrafter...you just gave me some motivation to get some of my tools back into working order...I have quality tools & I want them to look good again...

  • @carldavid1558
    @carldavid1558 Před 5 lety +7

    Great clip. Congratulations on the 4000. You deserve it.

  • @dustinpomeroy8817
    @dustinpomeroy8817 Před 6 lety +3

    I use Naval Jelly on handtools like this with heavy surface rust,the stuff is amazing and relatively quick and easy,will knock down this process by an hour or two,great video keep em coming

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Dustin! Naval Jelly has been around for decades! I used a ton of it when I was restoring a 1951 PONTIAC, it not only gets rid of rust but converts it to a substance that protects the metal... I sound like a commercial! lol Great tip! Thanks very much!!!!!

  • @derekdaly6449
    @derekdaly6449 Před 6 lety +3

    Do a video everyday, I love your stuff you just get right too it, ive been practicing your techniques and I’ve expanded my tool collection by buying cheap old tools and refinishing them, saved me so much money! Thanks Scout crafter all the way from Niagara Falls Ontario

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +3

      Hello Derek!! The best part is nobody wants rusty tools!!!!! When you go to a flea market you can rake up because most people can't see past the rust! Luckily we can!!! Great stuff!!! Thanks very much!!!!!

    • @paulsawczyc5019
      @paulsawczyc5019 Před 6 lety +1

      Collecting is great but using them is better.

  • @squirrelboy538
    @squirrelboy538 Před 6 lety +2

    4k subscribers? You're about to break 6! Congrats - I love your channel. No politics, no BS. Just great, condensed knowledge and an amazing fairytale ending ;)
    Oh yea, now you've got me coating all my tools in Shellac.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Squirrel Boy!!!!! I can't believe the growth spurt! Lol!!! How do you like the shellac!?!? I love the stuff! I just coated a sweet Utica tool for Wednesday's video!!!! Thanks so much!!!!!!!

  • @1stinlastout165
    @1stinlastout165 Před 2 lety +1

    Clean and ready to us without them in showcase condition is the perfect way for us tradesmen, after all we don't want the customer to think we never use them lol

  • @davidk6271
    @davidk6271 Před 6 lety +3

    I appreciate you showing us how you do this plus what you use , cheers from Tasmania.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Fumbly! Thanks you so much!!! I'm so glad you enjoy the videos!!!!!

  • @norherman
    @norherman Před 6 lety +1

    Again a outstanding effort and results. I was doing the samething today for a friend. Again good stuff Thanks!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Norherman! There are so many outstanding tools out there with a disguise of surface rust just waiting for us to recover them!!!! Good stuff!!!! Thanks!!!!!!

  • @steventrosiek2623
    @steventrosiek2623 Před 6 lety +1

    Unbelievable job of restoration!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Steven!! This was just a video to help people realize that many tools that look horrible can actually be brought back to life!!!! I'm so glad you enjoyed the video!!!!! Thanks very much!!!

  • @AaronBelknap
    @AaronBelknap Před 6 lety +1

    I like it! Those loosened up nice! Acetone and Trans fluid! Brilliant! I think I told you before, I use the Walmart brake cleaner to wipe my rubber handles on my tools. Even the tools I dipped in Plasti Dip. I spray on a rag (red) then wipe them off. I use it on my extension cords and anything rubber. My Dremel gets filthy and I use it for that as well. But be cautious! It will take the lettering off of a cordless drill torque settings. One video you used the washer as a bench, thank you my friend. I pile up so much crap on ours and use it all the time!!!!

  • @literoadie3502
    @literoadie3502 Před 6 lety +1

    Congrats! Love your videos!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Lite Roadie!!! I'm glad you enjoyed the outcome! Thanks very much!!!!!

  • @IruneSkye
    @IruneSkye Před 6 lety

    I'm loving your videos!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Stargazer! I'm really glad you are enjoying the content!!! Thanks very much!!!!

  • @RRED2
    @RRED2 Před 6 lety +5

    Nice One Mate Another Good Practical Restoration. 😃

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Steve! You know how hard it was not to make these shine like chrome!?! Lol. I had to hold back!!! People were asking about just a like you said "practical" restoration! I like to make them better then factory new!!! Lol. Steve- no more holding back!!! 😃👍. Thanks very much!!!

    • @jedi492
      @jedi492 Před 3 lety +1

      Deuteronomio, 18:11
      10.Que no haya en medio de ti nadie que haga pasar a su hijo o a su hija por el fuego; que nadie practique encantamientos o consulte a los astros; que no haya brujos ni hechiceros;
      11.que no se halle a nadie que se dedique a supersticiones o consulte los espíritus; que no se halle ningún adivino o quien pregunte a los muertos.
      12.Porque Yavé aborrece a los que se dedican a todo esto, y los expulsa delante de ti a causa de estas abominaciones.
      Jesus te ama, Dios te ama
      juan 3:16
      Porque de tal manera amó Dios al mundo, que dio a su Hijo unigénito, para que todo aquel que cree en El, no se pierda, mas tenga vida eterna.
      Mateo 10:24 Y no temáis a los que matan el cuerpo, mas el alma no pueden matar; temed más bien a aquel que puede destruir el alma y el cuerpo en el infierno.

  • @aeromedical6750
    @aeromedical6750 Před 5 lety +1

    Never owned any Klein pliers, but I understand they are quality tools. I’ve been slowly replacing my plier arsenal with Knipex.

  • @TheMetalButcher
    @TheMetalButcher Před 6 lety +5

    Wow! Most of your tools look alright to begin with, but those really needed a restoration! Klien too, sweet. Good tip on the electrical tape on the handles, I'd wondered how to go about that in the past.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +6

      Hello Metal Butcher! The best part of restoring tools is when you go to the flea market like I did and pick up these pliers go to the seller and say "How much?" and he looks almost ashamed to ask $2- Now I could have said "Will you take a dollar?" and I'm sure he would have agreed but I never bicker over a dollar, and then you establish a good relationship with the seller in case you see something next week... People don't want or buy rusty tools! That's the absolute best part of this hobby! You can get beautiful tools on a budget! Just like buying older machinery, you can't buy anything comparable today! They made great stuff years ago!!! Thanks very much!!!!

  • @willwyatt7023
    @willwyatt7023 Před 6 lety

    Simply GORGEOUS!!!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Will, I didn't polish or go over the top with these! lol The Klein line are nice pliers! THANKS VERY MUCH!!!

  • @parlenkow
    @parlenkow Před 6 lety +1

    Good job continue with the restoration

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello wladimir! Thankyou so much! Tomorrow we have a good one coming!!! 😃👍

  • @carbidejones5076
    @carbidejones5076 Před 6 lety +4

    I have many similar tools that I get cheap , spend a few minutes and they are better than anything made today

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Carbide Jones! They do make good stuff today but it cost a small fortune! Like Knipex! Thanks very much!!!!!!

  • @timothymassina6138
    @timothymassina6138 Před 6 lety +1

    Congrats on 4K subscribers! You deserve many many more!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Tim! I can't believe how fast the channel is growing! Lots of people enjoy seeing old tools brought back to life! lol Thanks very much!!!!!

  • @Txsbill
    @Txsbill Před 6 lety +1

    I went down a CZcams rabbit hole and ended up on your channel and find it relaxing to watch. As far as the plastic handles go, you might try soaking them in hot water for a few minutes and you should be able to get them off. Clean them up and use hot water to make them pliable again and put them back on. It would be worth a try.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Txsbill! You're right! The problem is once they are removed they tend to slip around on the handle, glue can help the slip... I am planning a video on handle replacements for pliers, Klein makes replaceable handles called Klein Koats and they are supposed to be very good! Thanks very much!!!!!

  • @uktony1525
    @uktony1525 Před 6 lety +4

    Scoutcrafter, Congratulations on reaching 4000 subscribers, and I am sure many more will join when they discover how informative and entertaining the channel is. It is my go to channel first thing in the morning. All the best from a very overcast UK.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +3

      Hello Tony - You have been a huge supporter of this channel for a long time and I can't tell you how much I appreciate that! Thankyou so very much!!! 😃👍

  • @WesW3187
    @WesW3187 Před 6 lety +3

    Wow! They’re pretty good for $2. Nice work.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Wes! That's the big difference between US and Asian steel, if these pliers were a inexpensive Chinese model the same rust would have pitted the steel and most likely ruined the joint... The better steel that Klein and Channellock use makes a word of difference in the long run! Thanks very much!!!

    • @chriscalvert2318
      @chriscalvert2318 Před 6 lety +1

      Wes Wright was

  • @TRONMAGNUM2099
    @TRONMAGNUM2099 Před 6 lety +2

    Thanks for the good knowledge, I have a bunch of tools that could use some cleanup like that

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Thanks so much! I'm so glad you enjoyed the video!!!!

  • @b-2466
    @b-2466 Před 3 lety

    Nice job

  • @jusb1066
    @jusb1066 Před 6 lety +1

    thats how to do it! i use blunt scotch brite on the handles and actually same as you, lanolin hand protector as it helps the shine come back. i too make sure theres no rust coming out of the joint, ive sat there 30 minutes feeding wd40 to them till its clear. super to make sure you covered them handles, ive seen nice pliers ruined by wire brushing the end of the handles, and they want good money on ebay still....if only they had just left them alone. nice job on 4.2k!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Jusb! I agree! The hand cleaner gets rid of the dirt quickly.. I've seen people using harsh chemicals like brake clean and it might work at first but then the chemicals break down the vinyl Handel composition over time and they eventually crack. I must say I've had wonderful results with my 50/50 mix of Mineral oil and Vaseline (petroleum jelly) it protects and is very safe! This very much!!! 😃👍

  • @VCGConstruction
    @VCGConstruction Před 6 lety +3

    Great video brother!!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello VCG! Thanks very much!!! Klein makes some awesome tools!!! Glad you enjoyed!!!

    • @VCGConstruction
      @VCGConstruction Před 6 lety

      ScoutCrafter yes they do!!

  • @Anonymous-it5jw
    @Anonymous-it5jw Před 6 lety +3

    Sometimes the plastic handles will slide off the metal - in those situations, how do you secure the handles to the tool? Thanks for this video. I have a similar pair of Kleins that need cleaning up. Your tips will help a lot.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +3

      Usually if you slide off the handle, clean the pliers with alcohol and put a little glue around the inside of the handles and slide them back on they will hold well! You can use many types of glue, silicone, epoxy... many glues would work! Thanks!!!

  • @OldSneelock
    @OldSneelock Před 6 lety +5

    King Electric sold Klien tools. I have had them since I was a teenager. Especially like the rubber handled screwdrivers.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Mr. Sneelock! Those screwdrivers are still made today looking exactly the same! I saw part of the Klein factory tour on CZcams and it was amazing! Thanks very much!!!!

  • @nalurash2787
    @nalurash2787 Před 6 lety +1

    Really nice Klein pliers...Congrats on 4K

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Nalu! Klein makes nice stuff! I didn't even know the brand when I bought them, I just look to see no cutter damage... These are nice... Thanks very much!!!!! 😃👍

  • @johnfletcher2445
    @johnfletcher2445 Před 6 lety +1

    Great restoration congratulations on 4000 subscribers

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello John! It's not the number of subscribers rather the quality! Everyone in the comments are great! Everyone is helpful and supportive and we all enjoy the same crazy hobby!!! Thanks so much!!!

  • @stodsratrod
    @stodsratrod Před 6 lety

    Awesome man,.....fricken awesome !!! Great job...

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello stod campos!! I'm so glad you enjoyed the video!!! You're obviously a tool guy! We love to see a quality tool brought back to life! Thanks very much!!!!! 😃👍

  • @number7__879
    @number7__879 Před 6 lety

    Congrats, ScoutCrafter keep those videos coming.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Number 7 It beat watching TV these days, there's nothing good on!! lol Thanks very much!!

  • @MRNVCDIY
    @MRNVCDIY Před 6 lety +1

    Great channel

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Mr. NVC! I'm really glad you are enjoying the content! Thanks so much!!!!

  • @parlenkow
    @parlenkow Před 6 lety +1

    Magnifico trabajo amigo

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello wladimir! Thankyou so very much!!!! 😃👍

  • @philchristmas6818
    @philchristmas6818 Před 6 lety

    PDS!
    pretty dam sweet!
    The 4 sharing sir ;-D

  • @TheSuperwrenchGarage
    @TheSuperwrenchGarage Před 6 lety

    Congratulations on 4k....they are nice

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Matt! This was a great $2 score! The best part of restoring rusty tools is when you hold up a rusty piece of junk and ask "how much?" they are embarrassed and ask for a dollar! lol Thanks very much Matt!!!!!

  • @nn2380
    @nn2380 Před 6 lety +1

    Have you ever used the Acetone/Transmission Fluid mix to free up the ratcheting mechanism for a socket wrench that can't be opened (because it is sealed)???

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello NN Yes!!!! The Acetone/Transmission mix is perfect for that! I have tried almost every penetrating fluid available and nothing beats it! It's even better if you warm up the part a little bit!! I really think you will love the results if you try it! Thanks very much!!!!!

  • @tubejim101
    @tubejim101 Před 6 lety +1

    Thank you

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello TubeJim!!! You are so very welcome!!! Thanks for stopping by!!!!

  • @gentlemensedge5503
    @gentlemensedge5503 Před 6 lety

    Nice tips...good to know!!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Gentleman's Edge! I'm happy you enjoyed the video! Thanks very much!!

  • @arthurbelarittervonmuller9183

    For two dollars, a nice bit and a good buy

  • @toolinhand
    @toolinhand Před 5 lety

    Great vid. Informative. Subbed

    • @ScoutCrafter
      @ScoutCrafter  Před 5 lety +1

      Hello Tool in Hand! If you liked this I really think you will like the second part of this video titled "KLEIN Restoration Re-Do with Klein-Koats" Let me know what you think! Thanks so much!!!!!!!!!

  • @wayneshanks9005
    @wayneshanks9005 Před 5 lety

    Love my tool's Scout

  • @staceyrunions3174
    @staceyrunions3174 Před 5 lety +1

    I'm from the south and guys around here don't look after their hand tools so well. You can find neglected one in the yard sale bins all the time in the summer. Make an offer on the whole bin usually gets grandma going. Watch out for the sheet metal snips and sheers cause most times they are worthless.

  • @DCPorter71
    @DCPorter71 Před 6 lety +2

    Congrats on the 4000. :-) Surprised you don't have more to be honest!!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello DCPorter! I'm just so happy there are other out there who enjoy the same thing!!! Thanks so much!!!!!

  • @The_Great_Whodini
    @The_Great_Whodini Před 6 lety +1

    Best part about a find like that, since they are kleins they have a lifetime warranty, so for $2 you can get a $20 pair of pliers if you break those

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Whodini! I didn't know they were Kleins when I bought them! I watched the CZcams video on the Klein Factory tour! It was very informative! They make great tools! I still can't get over the gap though! lol Thanks very much!!!!

    • @paulsawczyc5019
      @paulsawczyc5019 Před 6 lety

      I have a bunch of broken Klein tools (nutdrivers are very brittle steel) - where do I take them back to? I don't have receipts from 20 or 30 years ago.

    • @nickb2461
      @nickb2461 Před 5 lety

      Home Depot. Or Kleins website, you'll need the tool number if you go that route though. Take care!

  • @hatpeach1
    @hatpeach1 Před 6 lety

    Weirdly compelling videos! I'm subscribing.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello hatpeach1- I think the restoration of anything is compelling, maybe it touches some inner hope of after a hard life making things new again! 😃. I'm so glad you enjoyed the project! Thanks very much!! 😃👍

  • @mihailsaltirov5333
    @mihailsaltirov5333 Před 6 lety

    Hmm I wanna one of those xD no one will feel embarrassing to own old but strong nice and fine tool rely

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Mihail! Soon I will take these same pliers to the next step and make them better then new!!! Stay tuned!!! Thanks very much!!!!!!

  • @tonyrossi3151
    @tonyrossi3151 Před 6 lety

    I just threw a pair of these away because the cutting edge was warn and they had alot of rust. So you think there is any way to restore the cutting edge.

  • @AlexandreFuchsNYC
    @AlexandreFuchsNYC Před 3 lety

    Did you put the shellack on the handles as well or only the metal?

  • @parajeeper
    @parajeeper Před 2 lety

    I have a pair that look just like this. There’s an “INJ” mark on the handles. Are mine Klein as well?

  • @1998artek
    @1998artek Před 6 lety

    Forget ,Craftmans, Grenlee and other, Klein is the best and proud American made

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello 1998artek, I think you are right... Every professional electrician I know uses Klein. Thanks very much!!!!!!

    • @staceyrunions3174
      @staceyrunions3174 Před 5 lety

      Klein is king for lineman pliers but for slip groove pliers stick with Channelocks brand kliens don't grip as well

  • @darrinlawton2748
    @darrinlawton2748 Před 6 lety

    congratulations on 4000 subcribers

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Darrin! Thankyou so much! I hope everyone enjoys the content! Thanks very much!!!

  • @oo0Spyder0oo
    @oo0Spyder0oo Před 6 lety

    Can the pin be pressed out of the pliers to get at any rust inside? Or is this not doable?

  • @HBSuccess
    @HBSuccess Před 6 lety

    Good outcome but a lot of work. I'd probably squirt a little WD-40 or liquid wrench on the joint to loosen them up... wipe it down... back in my bags- start using again LOL.

  • @kevin123456789994
    @kevin123456789994 Před 5 lety +1

    great video! is there a way to restore linesman that are damaged due to cutting live wire?

    • @joshuadelacruz5302
      @joshuadelacruz5302 Před 5 lety +1

      Yes if they're Klein. You go to you local Home Depot, set them on the counter and say, "These are broke, I'd like a new pair". Klein has a lifetime replacement warranty. *Note* If they see you've intentionally broken them they will give you a hard time or ask for a receipt, they will still give you a new pair.

  • @briansotobassist
    @briansotobassist Před 5 lety

    You can use Shellac on any pliers or this is only for demonstration ?

  • @joeheilm
    @joeheilm Před 6 lety +1

    You have a great group of subscribers. I bet your thumbs up to thumbs down ratio is amazing. Anyway, keep up the good work. Cheers.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello Joe! It's true! Everyone here are really generous with their knowledge and expertise! I'm humbled by all the great input! Joe, we are the small fish in a big pond! lol Thanks again!!!!!

  • @scaleautoworkshop4426
    @scaleautoworkshop4426 Před 6 lety +3

    Congratulations on 4,000 subs. Great videos. The shellac you use is it 3Lb. cut?
    Vaughn

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Vaughn! That is a great question! I wish I knew for sure! I use Bullseye shellac by Zinsser, as you know the cut is how thick the shellac is and years back I think it was a thicker cut from the factory, now it is a bit thinner but still excellent. The serious woodworkers make their own shellac from flakes but I have always had good luck with Bullseye! Now if I have some wood I am trying to condition I will occasionally thin out the Bullseye with denatured alcohol so I get more penetration but lately it seems thin enough out of the can! BTW- I buy it buy the quart can. Thanks very much!!! 😃👍

    • @scaleautoworkshop4426
      @scaleautoworkshop4426 Před 6 lety +1

      Thank you for your reply. I am a great fan of Zinssers products. I able to get Shellac with a 3lb. cut at my local hardware store.
      Vaughn

  • @wildtimbrown
    @wildtimbrown Před 6 lety +2

    Short and sweet, Congratulations on the 4K. The only thing wrong with your videos is that they remind me of the "tonnage" of old wrenches that I need to find new homes for! (just the duplicates mind you ;-). Maybe its time to start SELLING on ebay? ;-). Keep it coming please Mr. Scoutcrafter!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +3

      Hello Tim! You are so right! I swear they multiply on there own! I am trying to mix it up a little but I have a trunk of old tools waiting to be restored! The worst part is it's really nice weather here in NY this time of year and I don't want to miss out on it by being in the basement! Lol. When you see me looking like Uncle Fester you will know I've been inside too long! 😂. Thanks very much!!!

  • @billlink7116
    @billlink7116 Před 4 lety +2

    When you do move, how many hundreds of small hanger pieces will you find around your work area? 😃

    • @ScoutCrafter
      @ScoutCrafter  Před 4 lety +1

      LOL!!!!!!! I lost a small square by the Dake I am hoping to find! LOL!

  • @nn2380
    @nn2380 Před 6 lety +1

    Great video! Do you still use the hand cleaner for tool handles that are made with that dense sponge-like material (high grip)??

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello N N, I dont have any of those sponge grips on any of my tools! (They are too old! lol) However A subscriber sent me a great video on a guy who cleans his sponge type handles with dollar store OVEN CLEANER!!! Really! It worked for him great! I would try to keep the cleaning solution as safe as possible as not to destroy your handles! Thanks very much!!!!

    • @nn2380
      @nn2380 Před 6 lety +1

      Oh, you would have a link to that video, would you? I tried doing a search on both CZcams and Google, but came up empty. Kinda surprised, as I thought Oven Cleaner was really caustic stuff. Don't know if I should spray it on and scrub off or let it soak for awhile.........

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +2

      Hello N N - I'm sorry I can't find it now! I was sent the link from a subscriber and didn't notice the title... I did find another video while looking that was titled "how to clean plastic tool handles without ruining them". He used Citrus degreaser by Blaster! 😃👍

    • @nn2380
      @nn2380 Před 6 lety +1

      Thank you!!!

  • @DavidPlass
    @DavidPlass Před 6 lety +1

    Great result, wow. What year do you think those pliers are? Congratulations on 4K subscribers!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello David! I don't think they are too old because the name was etched on instead of engraved... Klein makes great stuff! Unfortunately they also make a lower grade of tools in order to compete.. Depending on what model you buy some jaws are hardened and specially treated to cut steel and bolts and there lesser grade is only rated for Copper! I'm not crazy about that policy! Thanks very much!!!!!

  • @toolinc.collection1521

    Nice . I have a pair of klains v1

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Eliseo! Did you ever see the Kleins 160th Anniversary pliers! They look nice! Thanks very much!!!!!!

  • @marcmckenzie5110
    @marcmckenzie5110 Před 6 lety

    Anytime we can apply a little elbow grease​ and reuse old tools and products - well that is both a $ win and a win for the planet!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Marc! You are so right! I have another Klein set I'm doing on Friday! Thanks so much!!!! 😃👍

  • @davidhoward2237
    @davidhoward2237 Před 6 lety

    ever try evpo rust it does amazing job just dont use on blueing make sure fully submerge dont let it go for more then 8 hours (you can tho) and also when it fresh works the best but older stuff give a wired finish what works great too

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello David! I heard EvapOrust works good but never tried it... When the steel is hard and well made the rust doesn't pit as much! These pliers are a good example of good steel!!! Thanks very much!!!

    • @davidhoward2237
      @davidhoward2237 Před 6 lety

      try it some time does amazing work what i like about it get to places wirewheel cant and place where rust still there waiting to take over. Thanks for another great vid

  • @tonyholt90
    @tonyholt90 Před 6 lety +1

    Yep like the idea of getting cheap good quality tools and restore them, ready for the tool bag!
    When are you going to do the restoration of the crowbar as I have one that's been abused and want to see your ideas on overcoming the
    ( Claw has a nasty twist :( )

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Tony! Wow you are observant! You noticed that twist!!! I might have to paint part of that because of the awkwardness of the bend! I'll get on it! Thanks very much!!! 😃👍

    • @tonyholt90
      @tonyholt90 Před 6 lety +1

      ScoutCrafter looking forward to seeing the restoration on that one !

  • @AmericanCoinHunting
    @AmericanCoinHunting Před 6 lety

    Those Klein's look in as new condition now . Notice the gripping jaw space ?

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Dave! LMAO! You bet! I think I have become a sudo-expert on linesman pliers and all their variants! I have gathered information from literally all over the world on these type pliers! I will do a video on what I found out! Thanks very much!!!!

  • @4EntertainmentOnly
    @4EntertainmentOnly Před 6 lety

    i think the handle sometimes come off if you pull...then you can ge tthe rust inside and then put it back on

  • @Dominic.Minischetti
    @Dominic.Minischetti Před 6 lety +3

    Hey those are broken, there is a gap at the end...lol

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Dominic! LMAO! Now, thanks to that video and all the awesome feedback, I am a expert on linesman and similar pliers! I was surprised that these were Klein! Thanks very much!!!!!

  • @bricofast
    @bricofast Před 5 lety

    Great vídeo thanks, try wiha Germany tools the best quality and biutiful very strong ☺☺☺

  • @QuantumMind88
    @QuantumMind88 Před 6 lety +1

    What exactly is the purpose of the shellac? Is it meant to seal
    everything and keep the patina?

  • @toolinc.collection1521

    Is 10k suscrubers now . Very good .

  • @aguilayserpiente
    @aguilayserpiente Před 6 lety

    What mechanic soap did you use?

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello José! This was made by permatex but I like GOOP and Go-Jo too! They are all very similar! Those cleaners work on so many things! Thanks very much!!

    • @aguilayserpiente
      @aguilayserpiente Před 6 lety

      ScoutCrafter Those are the classics. In watched scores of your videos and learned a great deal! Thank you for the instruction.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello José! I really appreciate you saying that! I'm glad you enjoy them!!! 😃👍

  • @davidschwartz5127
    @davidschwartz5127 Před 6 lety

    Cut a piece of 16 gauge stranded wire, if the cut that and the thick wire both then they are good.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello David! I will try it!!!! That is a good tip because the stranded wire will not "snap" like wire hanger! Channellock uses a piece of Jute twine to check for sharpness! You know how hard that is to cut cleanly! Thanks very much!!!!

  • @therealknapster
    @therealknapster Před 6 lety

    Perhaps in this case soaking in white vinegar to restore and a brush up afters

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello therealknapster - Being this was a small project I skipped the vinegar because you have to wire- brush it anyway... A vinegar bath is great for large items or items that have a lot of small intricate areas, for hard steel and smooth areas you can skip the vinegar and go right to the brush! Thanks!

  • @toolinc.collection1521

    Congratulations on reaching 4000 suscribers .is ur klein v1

  • @psdaengr911
    @psdaengr911 Před 6 lety +9

    The wire wheel and Dremel weren't necessary. Soaking the working end of the pliers in white vinegar overnight would have removed all the rust without hurting the metal at all. It also would have worked up into the joint and helped to clean it. This is an example of pickling that is routinely used to descale iron castings using a more concentrated acid.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +9

      Hello P Schmied, I have been using Vinegar for rust removal for three years now, I have a few videos on it... Including it's limitations.. Vinegar will besides removing rust blacken the metal to you have to wire brush it anyway... I use vinegar a lot for intricut castings and larger pieces but for a small pair of pliers the wire brush is fast and easy! Thanks!

    • @wolfman1549
      @wolfman1549 Před 6 lety +5

      Maybe you should make your own videos since your a know it all

  • @iandamianluciferwilson7385

    Good job. Although To me the faces didn’t look parallel

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Roger- by faces did you mean the faces of the jaws? I'll have to look again but it was probably an optical illusion because I film with a phone! Lol. Thanks very much! 😃👍

  • @sunilkolekar6006
    @sunilkolekar6006 Před 6 lety

    Good

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello sunil ! Thankyou so much!!! 😃👍

  • @MrGrimsbonian
    @MrGrimsbonian Před 4 lety

    Cuts like butter??

    • @ScoutCrafter
      @ScoutCrafter  Před 4 lety

      LOL- That is a NY term I think... A excerpt from "Like a hot knife thru butter" =D

  • @MidwestToolReview
    @MidwestToolReview Před 6 lety

    I just purchased a pair of antique H.K. Porter bolt cutters for H.J. Epstein in KC. I’d like to restore them to their original appearance. I also thought, maybe you’d like to partner up on a vid, as I restore tools and showcase tools on my YT channel. Is this something you’d be interested in doing?

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety +1

      Hello Midwest Tool Review! Outstanding score on the HK Porter cutters! I did a video a couple years ago on a pair I picked up! They are so beautifully made and really ornate! A joint venture project sounds great! I just need a little time as I have a literally a trunk of tools waiting for restoration.! I don't know how I got so overloaded so fast! One minute I'm looking for projects and the next I've got 60 in the wings! Lol! Thanks very much for the support! I'll give you a heads up when I'm getting close to clearing the projects!!! 😃👍

  • @dakotahughes3003
    @dakotahughes3003 Před 4 lety

    Evapo rust I live by the stuff

  • @Yorkshire5504
    @Yorkshire5504 Před 6 lety +1

    Got a British made Stanley wood planner I mite have to send over to you from the uk, fancy doing a restoration vid on that ?

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Paddy! I have a trunk full of tools awaiting restoration! I'm out of control! lol If there is something you fancy let me know and I'll look in the trunk and we will tackle it! =) Thanks so much!!!!!

  • @samadrid6321
    @samadrid6321 Před 6 lety

    I have a pair of MountainAir Tool Company pliers, anyone know about this company? I live in New Mexico, and there is a small town named Mountainair, but I can find nothing on this company. My grandfather had these pliers on his ranch in the 1950 - 1970s. They are quite old.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Ryvr! They have a MountainAir rivet tool company in New Mexico, I wonder if that's the same business? Good stuff!!!

    • @samadrid6321
      @samadrid6321 Před 6 lety

      Yes, and I found the exact patent for the wrench dated 1944; however, no info locally on the company. Some time I may take a drive there and show them the wrench. Anyway, it's interesting to see how you restore old tools. I love tools, and I've found a few cast offs, brought them back to life and still use them. I used many techniques as you, so I must have done something right. My uncle died two years ago, and the guy was a real saver. He had some old tools, but the cousins probably took them and sold them too cheap. I would taken those tools, kept them, and passed them down the family. Aahh family with drug and alcohol issues , what a wonderful thing.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Yeah! You should go down there and see if there's an old timer who was there since "the beginning" you know the guy, he's about 75 years old with ear hair that sticks out an inch... Has to hold the pliers next to his belly so his bifocals and focus... lol It would be cool to see there reaction! Thanks !!!!!

    • @samadrid6321
      @samadrid6321 Před 6 lety

      Holy crap you just described me and I'm only fifty eight!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      ryvr madduck LMAO! Me too!!! 😂

  • @robertkat
    @robertkat Před 6 lety

    Make shure you dont leave them out in the rain again!

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Robert Kattner - Lol! I'm one of the few people actually looking for rusty tools at the flea market!!! Thanks!!!

  • @randellconner4201
    @randellconner4201 Před 6 lety

    That is a $40 pair of pliers. Good job restoring a bargain.

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Randell!!! You know, you can acquire a really nice set of great tools very inexpensively if you take the time to restore them! It's a great hobby and extremely rewarding! Thanks very much!!!!!!!

  • @lucyfuir6386
    @lucyfuir6386 Před 3 lety

    Your cousin.... from Bawstin

  • @bobthelanternguy8640
    @bobthelanternguy8640 Před 6 lety

    ScoutCrafter as you gain i lost 2 sub's this week. nice restoration as always. keep up the good work sir.... Bobby

    • @ScoutCrafter
      @ScoutCrafter  Před 6 lety

      Hello Bobby!!! Don't sweat the sub's, sometimes people will sub to see what your about then after a couple weeks decide the content isn't for them... We are speciality channels that will only appeal to .001% of all CZcams! I would rather have 25 solid subscribers that enjoy the content then 200 that could care less! Thanks Bobby!!!!!

  • @mdovideo1414
    @mdovideo1414 Před 4 lety

    I would soak them in WD-40.

  • @lucyfuir6386
    @lucyfuir6386 Před 5 lety

    Those are like $45 pliers