Here I saw a lot of magical moves. :) - Open driver door - turn engine on (do not start) - turn engine off - press door button three times - turn engine on (do not start) Blinkers will flash, doors will click. Now press any button on the remote. Doors will click and blinkers will flash also. That's all folks. PS. I had to clean the remote with isopropyl alcohol. It was all greasy inside. The water from the sweat evaporates, but the fat remains. I also changed the battery - 1616.
Thanks. My remote reset after removing the battery and keep aside for several hours. Now lock/ unlock is working but there is no hazard lights. How can I fix it? (It was there before remote reset)
@@Jbwyatt well, i didn't. It was an error. I swiched the internal radio component. Now i've a working key and a damaged one. I didn't find a way to program the cheap electonic i bought
Will that work if you can't actually start car? It will turn over but not start, I did what you said and it happened as it should of? Sorry I'm trying to sort my car on a budget, I'm a chick that likes cars but has no idea, so I tried doing a second and third time but no joy. But what is different is now when I unlock vehicle the hazards come on until I put key in ignition?
It wont start without the transponder chip. Its in the grey frame of your old key. I just used a stanley knife to neatly remove the transponder chip, made a slice in the new key where it sits and slotted it in without removing any of the housing so it wasnt loose. Worked a treat.
@@FuckTheSystem1987 Excellent.. Its a long story but I have a spare key that fits the lock but has the wrong transpoder inside it. Its a solid key from the replacement ignition barrel. I got one new key cut and put the old transponder into that. It works fine. It cost £35. I am looking to save money for the spare key. In short I have a key that won't fit the lock but has the right transponder inside and I have a key that fits the lock but has the wrong transonder inside. I guess I could cut it out and switch them. Nothing to lose I guess. I also have a spare transponder that opens and locks the doors. To get a key cut that will accept that cost £35. I don't know if there is a cheaper option for that? If anyone knows a cheap cutting service around South London or something I would be grateful
This is work for me in Cook Islands 🇨🇰, thanks for your knowledge . Suzuki swift 2005 👍👍
Here I saw a lot of magical moves. :)
- Open driver door
- turn engine on (do not start)
- turn engine off
- press door button three times
- turn engine on (do not start)
Blinkers will flash, doors will click. Now press any button on the remote. Doors will click and blinkers will flash also.
That's all folks.
PS. I had to clean the remote with isopropyl alcohol. It was all greasy inside. The water from the sweat evaporates, but the fat remains. I also changed the battery - 1616.
The only person who actually made it work! This worked for a USA Grand Vitara 2006.
This is very helpful! I did it on my suzuki swift 2005 after changing a new battery on the remote key and it worked! Thank you
Thank you, just did this and it worked💯
Thanks mate, this worked for my car
Yol!! Great when you find information that works.. Churr 👌🏻
Double 👍👍 for this life saver video.
Thanks! Very useful!!!
This works on a 2007 suzuki sx4 btw guys.
Thanks a lot
Very helpfull,
Also work's on Opel Agila A
How did you find the transponder to the ecu?
Thanks. My remote reset after removing the battery and keep aside for several hours. Now lock/ unlock is working but there is no hazard lights. How can I fix it? (It was there before remote reset)
Hi I’ve been offered one but it has no key at all, only has 40k on it, it’s ideal for a runabout in uk… how do I get it started ?
This guide can use in new swift ver 2020?
can i program a remote this way?
Can i program 2 keys?
This is very helpful, but what is the next step after confirming the programming?
Well. Good question. I've deprogrammed the good one
@@rinkia how did u deprogrammed it? i didnt think you can .
@@Jbwyatt well, i didn't. It was an error. I swiched the internal radio component. Now i've a working key and a damaged one. I didn't find a way to program the cheap electonic i bought
@@rinkia so there is no way to unprogram it right?
@@Jbwyatt no, there is no way. I've mede an error. Mea culpa
Can I program for unlock all doors with only one push?
Will that work if you can't actually start car? It will turn over but not start, I did what you said and it happened as it should of? Sorry I'm trying to sort my car on a budget, I'm a chick that likes cars but has no idea, so I tried doing a second and third time but no joy. But what is different is now when I unlock vehicle the hazards come on until I put key in ignition?
It wont start without the transponder chip. Its in the grey frame of your old key. I just used a stanley knife to neatly remove the transponder chip, made a slice in the new key where it sits and slotted it in without removing any of the housing so it wasnt loose. Worked a treat.
@@FuckTheSystem1987 Excellent.. Its a long story but I have a spare key that fits the lock but has the wrong transpoder inside it. Its a solid key from the replacement ignition barrel. I got one new key cut and put the old transponder into that. It works fine. It cost £35. I am looking to save money for the spare key. In short I have a key that won't fit the lock but has the right transponder inside and I have a key that fits the lock but has the wrong transonder inside. I guess I could cut it out and switch them. Nothing to lose I guess.
I also have a spare transponder that opens and locks the doors. To get a key cut that will accept that cost £35. I don't know if there is a cheaper option for that? If anyone knows a cheap cutting service around South London or something I would be grateful
Hello mate my old key got wet as it was in bad condition if I get a new one will this still work
Thx matt
hey mate did you ever try and find out? if so did it work
Bester Mann
What to do if the key is faulty?
Yeah, my Remote is faulty so i bought a new used one, But Can’t program it because i Can’t confirm the programming
Does this work for a 2010
Should be able to do 2005 - 2010 models the same. If not more.
Cant start the motor wont read the key
Cant start the motor
WTF?
33920 72k0 possible IMM off thanks