Painting The Rusty Engine Bay In My Hilux!
Vložit
- čas přidán 6. 09. 2024
- Shop Real Carbon Fiber Accessories: www.SimplyCarb...
Use “AN10” for 10% OFF.
Bumper Plans/ Merch: avrcustoms.com/
Follow me on Instagram! / austinniemela
Items used in the video:
Nylon Cup Brush: amzn.to/3G4K5dy
Scotch Brite: amzn.to/3yEV8sa
HVLP Spray Gun: amzn.to/3lF1O1T
Wax and Grease Remover: amzn.to/3PmQ6X4
Seam Sealer: amzn.to/38Cppgr
Sand Blaster Pressure Washer: amzn.to/3PwwG1W
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro: amzn.to/3ty94RJ
Tamron 28-75MM Lens: amzn.to/3EH6ufl
Tripod: amzn.to/2WjasJM
Send me stuff!
PO Box 133
Chattaroy WA 99003
Video Sponsored by Simply Carbon Fiber. Check them out here: www.SimplyCarbonFiber.com/Austin
czcams.com/video/zAUAcILiOYE/video.html amazing way
hey man, you might consider keeping the outside preserved and give it a shine with boiled linseed oil. It actually dries and hardens, but will stick better than just clearcoat. It will keep the ratty look, but make it also look clean. Just an idea, check it out!
Nice
Fireman's trick to the fan in the doorway: Move the fan back in the room a few feet but still aimed at the doorway. The total airflow out the door will dramatically increase! Bernoulli's FTW.
Austin: I'm not gonna do a whole bunch to this truck, definitelynot gonna go all out.
A few days later: man this engine bay came out amazing so I'm gonna tear the whole truck down and restore it with all original equipment and repaint it and make it all look sweet
I'd watch that😁
Hey I did say I'm going all out in the bay! haha
@@austinniemela whole truck refresh just seems what this truck deserves
Well... if he eventually plans a flip, might be a good idea to go that route.
Keeping an eye on this build that’s for sure. Currently stripped my 78 Hilux RN25 running a 12R motor here in Australia.
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
Honestly the bay was really clean to start off with, but looks freakin amazing afterwards! I need to get that sandblasting attachment you have....looks like it works really well.
Coming from a 4wd dude...I kind of want to see this thing as a crazy street truck. What about a UZ swap or really ruffle some feathers and put an SR20 in it
Ah a sr20 would be sick!! Yeah check them out they are cheap and work great!
So thankful guys like you exist , I just started working on my white 77 sr5 longbed again, mines still original but I'm in southern California right by the beach so mines gonna sit a little low in babyblue and chrome with cream interior an a sun roof. 🌞 also learning how to weld myself I'm rebuilding the floor boards and firewall. I want the truck to be super insulated and sound proof. Watching you rebuild your truck has been a blessing to watch MAN! THANKS
I like watching your videos because u complete the project and then starts the next without doing many at once.
Slowly getting some sponsors bro that’s awesome this channel has come a long way time to take it to the moon
Thanks man!! We will get to the moon one day! 👍
Glad to see another build coming in.. should have done an epic engine bay. White with some heavy flake and like 3 coats of clear.. all polished out.
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
You have the life! I love watching and getting inspired.
Looks great ! Like the patina as well . Think it should be lowered with a tight suspension or bagged .
Keep the patina for sure. Slick little truck man...check out Vice Grip Garage if you want an idea for how to protect the patina, pretty sure Derek has a recipe for his shine juice on one of the old Cadillac videos.
Sweet I’ll check that out! Thanks!
@@austinniemela you bet! Derek has a thing for patina on older rigs, he's nearly got it down to a science haha. Excited to see how this one turns out!
Be pretty sweet to do a 2wd pre-runner, leave the body as it. Interior cage, box the frame, improve the suspension.
I'd love to see you do a full restore on this. Theres so many patina builds on youtube, I think it would be much cooler to just go all in on this Hilux.
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
If the Dimension paint doesn't work out try Nason's. I had good luck with it on a few projects.
I hope this truck gets the full mini truck treatment.notched frame, bags, and all
👆Congratulations you have been selected among our shot listed winners INBOX ME
A beams motor out of an altezza would sound and look amazing in this thing! You did an amazing job on that engine bay. Can’t wait to see the finished product
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
Seriously your going all out with something no will see with the under bonnet. You have done a great job with the others continue and bring this gem back to be better than new.
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
A boosted v6 and nice set of wheels. This could be your sleeper shop truck and put some advertising on the sides that equals tax right off lol.
Excellent work Austin! looking foward to see the final work!
I like where you are headed already Austin! Going to be a real sleeper in some ways! Cheers!
Austin you need to rebuild this awesome truck. All I see anymore is people doing the patina look! I call it the lazy way to restore. I had one of these truck and wish I kept it.
I really dig the idea of leaving the trucks character on the outside and making the engine bay nice and the interior a nice place to be.
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
As a hilux owner from the UK really looking forward to this one. Also I'm sure you won't mind but I've shared it on some UK hilux Facebook group pages. Hopefully get you some more views and subscribers and potential advice.
Sweet thank you!! I’m glad you enjoyed!
Austin. Maybe consider doing a dump bed like the old MiniTruckin' magazines used to feature. Useful and cool.
Who doesn't love a good product plug😂 I'm digging the color matched booster. Maybe make a spare carrier in the bed? Cool video as always I wanna know what people come up with and what you end up doing.
Try doing a minimal wire setup where only the big stuff shows. Make it a very clean engine bay
👆Congratulations you have been selected among our shot listed winners INBOX ME
The spots where it looked like you were having issues on the primer, look like you just got it a little heavy there resulting in a little bit of solvent pop and the orange peel. It seemed to be in areas where you may have a bit more overlapping passes, or hard to reach areas, that could have caused the buildup like that. You obviously have experience with body work and the such so not knocking your work at all. It's hard to tell exactly from the short pieces of video, but that's what it looked like to me. Have a good bit of experience myself so not just keyboard warrior-ing. Nice video, keep it up!
Thanks! It could be but there were spots where it was light! It did the same thing on a grill I painted too!
Lower it and make a wide body kit for it
That sand blasting fade out and transition into painting was Spielberg stuff right there!! Haha
I’ve been looking for a 74 Hilux for years anyone reading this comment and got one for sale or knows of one.
Clean clean clean Survivor I Will pay what it’s worth ... Melbourne Australia..
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
Come on bro, go all out, it's what you do best, you know you want to.
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
Sponsorships?! Hell Yeah Brother! Keep up the badassery boss!
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Make it a swivel frame truck like some of the old power wagons were!
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
i love you builds i watch you videos from mozambique
Damn I wanted to do the same thing to my 77 datsun 620, tucking wires and cleaning up the engine bay.. unfortunately I lost the push to do so when it started running funny and couldn’t find parts and ended up selling it.. oh well there’s always something else on the horizon.. good work Austin !
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
Excited to watch this build finally. Been waiting for it since I mentioned it in one of your Instagram story questions
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
I really like this project.I have a 79 Toyota wolverine and you are giving me a lot of ideas..
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
I hope you took my advice and took a look at LC Enginering they have mild to wild engine parts for 20 &22r's stage1 to stage5 race engines, ps definitely get one of there high proformance oil pump's. Stock oil pump's are the Achilles heel of the toyota 20&22r thay hard anodized the case and remachine to tighter tolerance, I highly recomend one.
Yes I have seen their motors! I did a aisin oil pump, I have never had a issue with them!!
I like the theme of keeping the paintina on the outside. Maybe carry over the immaculate look of the engine bay to the frame and underside?
I might have to!! Thanks!
Put a Cummins R2.8 Diesel Engine in this truck. Keep going diesel. Keep the good work. Saludos.
Nice Job! My brother has a dually Toyota Huilux. He started the restoration but never got the chance of finishing it.
Looks great, just heard of this stuff my friend used it on a 53 Chevy pickup PaPa Patina. It’s a clear that come in different shine. It’s self leveling and can be applied with a foam brush. I’m sure you can spray also. I was amazed with finish. Just an idea.
good night my friend. I missed a project like this. following the next videos. hug!
nice job Autin i love this truck my father use to have one back in the days
May as well just do the whole truck, drop it to the ground, 4 cylinder wrx sti drive train, suspension kit, rotors and calipers, the works. Nice little hot rod.
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
always exciting to see what you do with this trucks, i would love to see that thing raised and painted with a camuflage job :D
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
crazy idea #1 - buick supercharger
Idea 2- Airbag lift like the maz grande
Hi GO ALL OUT WITH THE INTERIOR TOO
KEEP UP THE GOOD WORK 👍
Sweet!! Looking good!!
Another one!? Man I’m so happy the content is coming out quickly. Keep up the grind. 💪🏽💪🏽
👍👍👍
I like it. Next time please give us the complete sand blasting video. ; )
Hi austin, i'm from Guyana, south america i enjoy watching your videos. I would like to know where you sourced the parts for the green truck?
Yo bro. Like your channel. And as well your work... not sure if you willing to try it.... The black plastic the would cover most of the cables in the engine bay paint them "White"?
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
I'm surprised you stuck it out that long with that paint!
the hi lux is looking great and I like that color, I want to see the next video
You should try to get ahold of Dave Chapelle from Dirt Every Day. He lives somewhere near Spokane and was a big mini truck guy back in the day.
If you are going going for a crusty look I think stripping more of the paint off, rusting it, and doing a clear coat over that would be cool
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
You can use pr15 after you get all of the rust off. It work real well. I got some in my car and no rust so far.
Great vid, I love the old ute make over, keep it up!
Love the build, can't wait for the next video, the suspense is killin me!
Hello Austin ,the video is very good, you are doing a great job on the truck and very well detailed in it ,greetings
I don't know if you covered suspension, but airbags would be sweet so you could lay it out. :)
After looking at the engine bay, the rest of it should be the same. It would not be complete without your personal touches. This bakkie deserves it😁
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
I always enjoy the extra mile on your projects. 👍👍
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Good video bro can’t wait for this build series
Maybe a nice stock look plus the factory wheels
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
Looks good so far.. Definitely go with aftermarket headlights that can function as LED, with center lenses being yellow and outer being clear. Would look dope.. I would roll and pull the fenders, lower the truck maybe 3 inches in the front and 4 inches in the rear sitting on some 17x9.5 front 17x10.5 rear wheels with thick tires to add to the rust look the wheels should be copper lip O_O lol man I am too invested.. But hey, I am excited regardless..
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Sherwin Williams owns Martin Senour paints. If you have a good NAPA store in town that is another source for paint supplies.
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
Awesome work Bro!
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Looks amazing 🍻
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Make it a Bosozoku style truck
Make it Freaky man!! Don't need it restored...bring the heat!!
What size is your shop? Looking at building one and trying to figure out good dimensions!
36x36. I’d go bigger!
You cant apply heavy coating without rest between each coat. The first coat always has to be very light, like dust, then it should nt be a problem
Like always bro nice work great videos
Have you ever messed around with the turbo 22re’s? That would be a pretty cool build🤷🏼♂️
I have not boosted a 22re! That would be cool
@@austinniemela someone here asked me to send them money from telegram for a truck, you gave away, is this you?
@@gtaitbiz7787 scam
@@austinniemela thanks!
@@austinniemela I thought so, after he was being sketchy
love your work
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
4.0L V6 swap it from a 4th Gen 4Runner or 2nd Gen Tacoma?!?! Would be an interesting swap
Stoked on this build...👍
Face the sand fitting up so water doesn't get a chance to soak it, I used coal worked great on a frame
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
Good morning nice build I have the same truck I swapped out the 20r to a 22r I wanna Frankenstein it as well .. lmk if your interested in doing another after this one mine is super clean I'm in Florida n will drive her to you lol
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
Good job man
Looks great!
Do all the truck that color
In Sudan, this Hilux is used as a farm truck, and milk is sold with it in the streets and neighborhoods
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
I think that little truck should be put back together stock, no mods
will look like it’s light glowing inside the engine bay 😎
Hands up if you think this will be a full resto.🙌
Yeah, I think it will eventually.
🙋🏼🧑🔧
nice build.
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Awesome Toyota truck 1977.
👆Congratulations you have been selected among our shot listed winners INBOX ME❤️
Drop a 4.7 out of a first gen Tundra in there.
What was that red abrasive wheel you used? I'd like to get one.
I linked it in the description
Just do it Austin, throw a little diesel in this thang too! That engine bay could be eaten on, and a diesel would compliment this truck so well! Looking forward to what all you do to this, keep up the great work!
good job
clear the rest of the body love it so far though
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Please make the truck look like new again. Paint the whole truck.
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Nice truck, I love what you do for me TOYOTA🎤🎵🎼🎶
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Is this one of them hoax shit that’s been going on with you tubers!?!?
Acid dip future cars
👆Congratulations you have been selected among our shot listed winners INBOX ME🎉
Two wheel drive Toyota Wolverine with air locking rear posi.
👆Congratulations you have been selected among our shot listed winners INBOX ME💯
Great video......