Mobility scooter Motor repair Part 1
Vložit
- čas přidán 10. 12. 2018
- Brush unit removal / inspection and Motor removal Part 2 shows the motor dismantling and refurbishing.
SUBSCRIBE and LIKE we will answer any question you have. & you can contact us direct on nithsdale.wheelchairs@btinternet.com
For motor bushes head for the link www.nithsdale-wheelchairs.com...
www.nithsdale-wheelchairs.com...
Thank you. This helped us work out how to get into my scooter to change the fuses. I'm now mobile again.
Thank you so much for sharing your experience and helping us
Someone just gave me a scooter....
Very nice but don't work .
Just stripped the whole motor out because three of the four bushes were jammed solid .
Your video has helped no end .
Thank you .
Trentbridge Troll if you need any brushes let us know
A way to clear out brush debris is to remove both or all four brushes, then to blow it out with compressed air through one of the hole one of the brushes fit into. Sometimes that will clean the commutator and it won’t need polishing/ resurfacing.
Would still fine the commutator a clean as part of a service
Hello great video I have been an electrical engineer and now retired I would like to repair mobility scooter here in Fl..I hear a German accent.reminds me of my Grandpop who came from Germany and was my insperation for my electical interest he had a electical repair shop in Phila..Great Man Tks again
I thought i had lost that accent... well spoted. i have allready had a few comments on my strange accent.:) Its a stuggle when you have been brought up bilingual
😎😊🖐️🖐️HI IM IN 🇦🇺, I HAVE SAME CHAIR SCOOTER AS THIS, WITH SAME SYMPTOMS. YET WEIRD THING IS, WHEN WONT GO FORWARD, EVEN UP A SLOPE,
WHEN I PLACE IN REVERSE, MINE WILL DRIVE, YET SLOWLY BUT SURELY, .
NOW I CANT GET TO GO FULL STOP PERIOD,
I CHARGE UP, AND FRONT LIGHT WILL WORK, YET THATS ALL.
THE BAR METER ONCE KEY IS TURNED, WILL QUICKLY FLASH ON THEN STOP.
I HAVE NO FORWARD OR REVERSE, NOR THE THE BUSHELL SOUND ON MOTOR, NOR
BEEPING FROM REVERSE MODE WARNING.
THANKING YOU, AFTER FINDING YOUR SITE, I AM ABLE TO NOW UNDERSTAND, ALSO WILLING TO FOLLOW YOUR MAITENANCE
INSTRUCTIONS.😎😊😊😊😊👌👌👌👌
Usually those beeps have a pattern, usually by number of beeps between short pauses. Then you can look up the trouble code for the specific model and the code will narrow down the source of the problem. Sometimes it tells exactly the problem or part that needs replacing.
👍 Love your blogs keep up the good work. 😊 Dido 👍 🇦🇺 😎
Drive envoy.
I have the same problem
Hello what brushes do I need for prowler 3410. And rascal 850...
Hey grandpa I need help with my cart I’m not getting enough speed I’ve tried turning that little dial but it’s not changed please help
Hi what type of bearing i need for the rotor ,bearing in the side with brushes
Sorry don’t know what type of motor best take it out and measure it some have the size engraved take note I’d this before removing
Thanks for the help. Unfortunately I made it worse unsure why the long pins wouldn't go back in🤣
RID3S TH3LION should do they came out lol. Ok sometimes you can poke a small punch down the hole from the other side then insert the long bolt and try and feel for the punch then push it in with pressure applied to the punch end so not to displace the long bolt. Can be difficult with the magnets pulling the long bolt.
@@tomjacques4 🙏Thank you so much again 😊 If all fails tomorrow I'll attempt again 🤭
Mate, could you please tell me what tool I need to buy to remove the spring so as to be able to access the rear dust cover and bush? Thank you again.
Can you tell me the size of the caps for the brush motor
Mate, to remove the rear spring, what size tool do you need please?
Michael Underdog hi 12mm spanner for the top bolt. 5mm Allan key for the motor bolts
I have a pharmore wizard When put to full power vibrate then shuts off the fault light flashes seven times if you turn the power down to have this does not happen is it the speed control unit that is faulty on the handlebars
christopher stearman hi I would first put the speed pot at it lowest setting. Start driving at said speed then while driving slowly increase the speed pot if it cut out then it’s a good possibility that it’s faulty.
Nithsdale Wheelchairs V Yes I have tried that works perfect and will sometimes go at full power as soon as strain is applied he cuts out flashes seven times the That was again but if left on full power from a standing start vibrates and cuts out
@@christopherstearman1788 mmm. check all connections as it can fold and may have slack terminals, Seven flashes usually indicates throttle issues(but this will depend on the controller used on said machine) but thats on start up.... shuddering may be problem with the brake not releasing or worn brushes / dirty commutator, are you trying to climb a steep hill. what does the battery indicator do when it starts to struggle and cut out.
Guys a kymco maxi xls motor brushes 4 off, 1 is good, 1 is stuck inside, 1 is worn and marked where the brush is against the commutator, the other i haven't touched (scared to look), can the commutator be cleaned and the motor rebuilt? How much would that cost roughly?
Hi you could try and clean the commutator with a glass fibre pencil and fit new brushes. Gently pull the brush unit out that is stuck. If it won’t come out then you will need to dismantle the motor. Hope this helps. Ps when you fit new brushes make sure they slide in and out with ease.
@@tomjacques4 got one ebay
My kymco midi scooter’s motor goes very hot when I drive, any idea what could it be ?
Hi, I would remove the brake and drive the scooter. Remember this to be done in a safe environment away from traffic as you will not have a brake. And then measure the temperature of the brake and the motor. Sometimes you get a faulty brake that causes friction therefor causing heat transfer to the motor. This way you will know what is faulty. Check brushes and clean commutator. Also do you drive up steep hills or is the user heavier than the scooter limit. Hope this helps. We have replaced a few motors and brakes on this model.
I need to find the plastic part that goes into the Motor, then the brush, than cap. I need 2. do they sell these type of parts? its for my Celebrity scooter. both brushes were totally welded into the plastic. they pop out, but I cant find them on the internet, only the caps. its a 2013 and the model # of motor is 10517. Thanks for a cool channel
Hi can you send me the serial number of the scooter please. We do have some in stock
@@tomjacques4 Sir, Thank you for responding. I found them on the internet and ordered some. Thank you for a great channel!
Mate, this again is so helpful. Starting from owning no tools whatsoever, what size sockets and any other tools are needed please to do this job? Thank you! Michael in Australia
Can you send me brushes for a Pride gogo sport S74
Hi motor is a sealed unit with internal brushes spare parts not available. Usually lasts the lifetime of the motor. You could open it and measure them maybe we will have something to suit. Tom