I know this is an old vid,.but Ive just followed this here in the UK...step by step.....and Bingo....works like a charm.....thanks guys for sharing this ....yes it is still relevant after all these years .
Outstanding video! Worked like a charm on my MVH-2300NEX!!! Thank you! I can finally catch up on my firmware that’s been out of date for probably 2 years.
Your advice was good. It was an afternoon job because it was more of a pita to dig the aftermarket harness out and reconnect it with very limited space to work with behind the dash. I think, I seen this with some higher end Pioneers, but it should be a screen option and disclaimer given to disable the parking brake to view files, update firmware, bluetooth and watch dvds. They'res too many basic features wasted without a bypass installed.
Actually some pioneer models actually do have that feature from the receiver standby screen in the bottom left corner 1 inch up 1 inch in from the left hold the screen for 15 to 30 seconds and a confirm message will pop up in the middle of the screen that says turn off/on drivelock select "turn off" and your DVD player and Bluetooth features will work without the remote wire. At least almost every Pioneer receiver in the last 5 years I have owned has done this. Funny thing is it is not mentioned in the menu you have to know it's there. The only receivers that don't have this option is all of the NEX and the NAVI receivers on those the remote wire has to be bypassed using a micro bypass switch.
So what do we do if our vehicle does not use the blue remote turn on? I only connected the blue wire on my aftermarket harness adapter so the wire wouldn't be loose from the receiver wire but my vehicle does not use the blue wire there is no pin that connects from the factory harness to the aftermarket adapter. I guess my question is will it still work even though my vehicle does not use the remote wire?
Hey I followed you tutorial and it works but I'm getting brake light on all the time when driving ,do I remove the green bake light that's hooked up to parking brake and only connect it to the bypass wire?
I've got a question. This guy's silverado doesn't have a vehicle's amp so therefore there's no amp turn on wire. I connected the blue to the pioneer's amp turn on and it's not working
Did you connect the green wire to the green wire going back to the car stereo? I think I put it on the wrong side and mine is going into the body of the car.
7/20/23...LOVE THE CHANNEL...PLZ HELP 😁 Going to buy the Pioneer dmh t450ex. Im going to use the universal parking brake bypass, or traditional ground out method for bypass. BUT if Pioneer Weblink has to have location access from my phone to work, will that ultimately STILL DISABLE the video making it unwatchable as if the parking brake is engaged, eventhough I have the parking brake bypass installed???? Wont buy radio IF this doesnt work..BIG THANKS OF COURSE🤞🤞
With firmware version 3.0 I can no longer bypass the warning screen on my dmh wt 76nex Is there a new version of bypass or does someone have an older firmware version I can flash?
I have a manual trans honda. I installed an avh 4800, but my bluetooth settings are greyed out. If i remember correctly, there is this green cable that wasnt connected to anything after i out it on. Do i connect that cable directly to the cars harness, or should i get this bypass for it? Sorry, im not to i formed about this sorta stuff
Recently I purchased a stereo bypass and installed it on a 2015 Chevy Tahoe. Originally I installed the bypass with the green wire connected to the radio and the truck harness. I later went for a drive tried watching videos and learned of my mistake by watching your video. I took the dashboard apart one more time and only connected the emergency brake light green from the radio harness directly to the bypass. I installed everything again and tested with no luck. The new unit I have is a Pioneer DMH-WT8600NEX. Do you think Pioneer is doing something different on this new receivers or is it something that I did previously and possibly damaged the bypass. Help please, Thank You.
Firstly, thanks for the informative videos. I see you connected Blue and Red accessory wire together in radio harness and then connected it to Red on pioneer wire plug. Is that Blue wire on radio harness for antenna? I have Metra 40-NI12 antenna cable. Debating whether to connect antenna Blue wire to Blue/white or Red accessory wire.. Please, advice.
Hey your videos are great first off i just had a question im looking to install my pioneer avh-1300 nex head unit into a 2007 toyota highlander but the vehicle side harness doesnt have a remote start wire can u help me out on installing my micro bypass thx
I have a pioneer avh-x491bhs in my 2014 dodge ram but my sequence is park shift tran to a gear then back to park to get the dvd to work the how would i hook a microbypass
I have an avh5800 pioneer that I purchased a microbypass for that works fine when appradio loads but still says prohibited when trying to watch a dvd or miracast. what do you think I should check for troubleshooting?
Hi, saw your video, cool, I have the pioneer avh-501ex dvd/cd player. Got my bypass, all I need to do is connect the bypass to the pioneer? Noo need in cutting into parking brake wire.? Thx
I am in the process of installing a pioneer avh 2440nex into a 2013 Nissan sentra sr. When I pulled the stock radio out it has a bunch of harnesses attached to it. A blue one, pink one , the antenna, the standard radio plug, and then a larger plug with a bunch of wires. I think the pink is the xm antenna. What is the blue connector (not FM antenna) and what is the larger plug? Do I need to worry about those or just assemble the radio harness to the pioneer harness and attach the radio adapter?
You pretty much answered your own question mate this device connects 2 the blue remote/accessory wire, the black ground wire, and finally the green parking brake wire simple as that.
I have a pioneer that has a ready made harness, it has something that looks like a bypass already on it that’s connected to the harness, this was put together by crutchfield, I have the three wires bypass that I purchased separately, would like to send you a pic so you could see it and maybe advise me how to install the bypass, however don’t know how to send you a pic. Thanks for any advice Ray
see you have a pink parking brake sensor too first one iv seen bar mine is that the one to ground for the daft hsndbreak in no I swing bypass kits as smubsont seen too need them or relays but understand I have a buisness to run but any helps appreciated
I just hooked one of these to my pioneer 8200nex and its a no go any tips or pointers, instructions says not compatible with avic models any idea why didn't see that part until after i had it hooked up
Nice video it looks easy very professional styles to do it but what if I have and 4 wires 1blue 2black 3green 4yellow Where do I connect the yellow wire
I'm wondering if its because some radios, including newer alpine and pioneer require a double negative, or "pulse relay," I've heard it referred to, as well.
What do you do if you have a maestro installed for steering wheel controls?? Should you install the bypass on the car harness side or radio harness side???
Hey Dude, love all of your videos. I just got the Apline KTA-450 and the Apline iLX-W650 still in the boxes. Would to see how you put these bad boys together , your way. Keep up the great work. Peace! ~Sam~
Hey guys- know you're in Cali at the convention and GREAT content by the way. Love the show and your channel! I have question bc i'm having my kenwood excelon installed by best buy "that place that buys best" and i'm sure they're not gonna ground the parking break wire for me. My question is this: I have the microbypass that you're showing there, but wondering if I might be able to just clip the parking break light green wire and ground it to the unit itself or since the harness is already wired up I HAVE to splice into things this way like you're showing. Hope that makes sense.
The one that says remote wire what should be actually stamped onto the wire itself or the wire that has a yellow stripe on it (not to be confused with your rear green speaker ground wire which will be green and black). That is if it has one.
I have a Boss Audio System but it doesn't seem to have a remote system remote control/amp blue and white wire. Am I missing something or will it not work on my system?
I have a 2006 suburban, with the 4200 nex stereo, not sure what else may be hooked up behind stereo, for example my steering wheel controls volume and source... I have bought the bypass but I don't have a clue what I am doing or what I will find wiring/harness wise... one thing I don't understand in the above video is: "isn't the green brake wire currently hooked up to the brake? so in the video you cut it and splice it with the bypass... what about the other end that is already hooked up to the brake? What do you do with that? in other words there will now be no wire at all hooked to the e-brake? Thanks.
Steven McMullin for the e-Break yes you can cut it and connect and then cap off the car side. We just disconnect and pull the old wire out after it is cut.
Thank you. My only concern now is I don't know if there is some sort of PAC or something else in there to enable my steering wheel controls... in other words I don't want to have to re program something, so I am more than hesitant to tear into it... any suggestions?
I also have a RPG-GM11 installed, the light green wire from stereo is spliced into a light blueish wire that goes into the PAC I think, and the car toys guys wrapped it and another wire or 2 marked NAV? I am also curious on how to reprogram the RPG-GM11 if needed, I did not get any documentation regarding it, so I dont have a clue on how to do that if needed? plus it is burried back under the dash pretty far. Not sure why the light green wire from stereo would be going into a wire marked NAV? that then goes into the PAC? On the back side (car side) of the PAC do I assume that the light green wire is the parking brake? and then cut and cap it?
Steven McMullin it sound like the have the break wire connected to the PAC break wire out put. If so to unlock the radio- start with e break off- turn on key- e break on off on. This will unlock the radio. If you would like to reprogram the PAC, they have all their manuals on the web site www. Pac-audio.com .
How could you add a switch to the micro bypass so that you could disable it should the need arise? If the switch was on it will bypassed else if the switch was off the normal factory intended behavior. If it matters I have an E46 and a Kenwood DDX9704S
Falcon Flooring I actually purchased the radio used and had no idea there was any wire that needed to be grounded or bypassed. i dont know what else to do. Theres no long green wire so im stuck without bluetooth
Awesome, thanks for sharing all these videos. I wanna ask your opinion on a system I'm trying to put together, it's an all pioneer system from headunit to component mid's, tweets, with pioneer 4 channel ts-w261d subs & pioneer gm 8601 amp. I here the head unit & speakers are good but there amps are not wat say u?
lolo ent we install a ton of them, they are a great sound+ value. Here is the install we did for our Pioneer rep czcams.com/video/XSJE89avY7s/video.html
You make it look so easy jeez. Did that in 5 minutes. It takes me forever
How long does it take you to make 3 wire connections?
Forever eh? What else takes you forever?
@@kjaxky for me, cumming
I know this is an old vid,.but Ive just followed this here in the UK...step by step.....and Bingo....works like a charm.....thanks guys for sharing this ....yes it is still relevant after all these years .
Outstanding video! Worked like a charm on my MVH-2300NEX!!! Thank you! I can finally catch up on my firmware that’s been out of date for probably 2 years.
I'm late to the party, but I installed this on a Pioneer AVH-X2800BS. Worked perfectly. Thanks!
Your advice was good. It was an afternoon job because it was more of a pita to dig the aftermarket harness out and reconnect it with very limited space to work with behind the dash. I think, I seen this with some higher end Pioneers, but it should be a screen option and disclaimer given to disable the parking brake to view files, update firmware, bluetooth and watch dvds. They'res too many basic features wasted without a bypass installed.
Ricky Plotner I agree
Actually some pioneer models actually do have that feature from the receiver standby screen in the bottom left corner 1 inch up 1 inch in from the left hold the screen for 15 to 30 seconds and a confirm message will pop up in the middle of the screen that says turn off/on drivelock select "turn off" and your DVD player and Bluetooth features will work without the remote wire. At least almost every Pioneer receiver in the last 5 years I have owned has done this. Funny thing is it is not mentioned in the menu you have to know it's there. The only receivers that don't have this option is all of the NEX and the NAVI receivers on those the remote wire has to be bypassed using a micro bypass switch.
Thanks for making this video. I put my radio in 3 day ago and just now got the DVD feature to work thanks to you guys.
I usually make connections to parallel wires about an inch apart from each other in case tape gives away or wires get pulled. Safety first!
Never thought to poke a hole and thread it like that, nice tip
Edwin Correa yes what great tip.
Very clever technique. Wish I thought if it on my own. I did it today and it worked great.
Thank you so much.. this is hands down the best guide for this, done it first time with no issues 🔥🔥😄
HL and the picture
HL and the picture
@@ugyfth500fam z
Cz
V ,:▪︎,; NbVN,
Doing this today, thanks for the clear steps. Hole poke technique was new to me.
Worked like a champ, no more cussing at the radio
Followed the instructions and it worked perfectly. Thanks.
Thanks for the help. Fitted a pulse bypass to my Pioneer headunit. Now we are a go lol.
So what do we do if our vehicle does not use the blue remote turn on? I only connected the blue wire on my aftermarket harness adapter so the wire wouldn't be loose from the receiver wire but my vehicle does not use the blue wire there is no pin that connects from the factory harness to the aftermarket adapter. I guess my question is will it still work even though my vehicle does not use the remote wire?
Any recommendations for head units that take 10-15 seconds to boot? Will the micro bypass still work well, or do we need to introduce a delay relay?
Hey I followed you tutorial and it works but I'm getting brake light on all the time when driving ,do I remove the green bake light that's hooked up to parking brake and only connect it to the bypass wire?
What’s the difference with wiring a bypass or just grounding the light green wire to the radio?
I've got a question. This guy's silverado doesn't have a vehicle's amp so therefore there's no amp turn on wire. I connected the blue to the pioneer's amp turn on and it's not working
Thanks for the guide. It worked perfectly for me!
Can anyone confirm which side to install this on (car or stereo side) with an Axxess ASWC-1 steering wheel control adapter harness already attached?
Hey Five Star! Always end up landing on your videos for information. You guys are cool. Thanks for the awesome info and well orchestrated videos.
+Maxfield Brockman thank you!
Did you connect the green wire to the green wire going back to the car stereo? I think I put it on the wrong side and mine is going into the body of the car.
Great vid 👍🏽 Thanks for sharing.
7/20/23...LOVE THE CHANNEL...PLZ HELP 😁 Going to buy the Pioneer dmh t450ex. Im going to use the universal parking brake bypass, or traditional ground out method for bypass. BUT if Pioneer Weblink has to have location access from my phone to work, will that ultimately STILL DISABLE the video making it unwatchable as if the parking brake is engaged, eventhough I have the parking brake bypass installed???? Wont buy radio IF this doesnt work..BIG THANKS OF COURSE🤞🤞
old vids but great tutorials!
With firmware version 3.0 I can no longer bypass the warning screen on my dmh wt 76nex
Is there a new version of bypass or does someone have an older firmware version I can flash?
I’m trying to do this to my crown Vic, pardon my ignorance but which wire is the “remote turn on”, would that be the constant or the accessory wire?
I have a manual trans honda. I installed an avh 4800, but my bluetooth settings are greyed out. If i remember correctly, there is this green cable that wasnt connected to anything after i out it on. Do i connect that cable directly to the cars harness, or should i get this bypass for it? Sorry, im not to i formed about this sorta stuff
How do you pull your emergency brake wire out when its hooked up? Will it make a difference if I just cut the wire from the brake?
Recently I purchased a stereo bypass and installed it on a 2015 Chevy Tahoe. Originally I installed the bypass with the green wire connected to the radio and the truck harness. I later went for a drive tried watching videos and learned of my mistake by watching your video. I took the dashboard apart one more time and only connected the emergency brake light green from the radio harness directly to the bypass. I installed everything again and tested with no luck. The new unit I have is a Pioneer DMH-WT8600NEX. Do you think Pioneer is doing something different on this new receivers or is it something that I did previously and possibly damaged the bypass. Help please, Thank You.
Firstly, thanks for the informative videos.
I see you connected Blue and Red accessory wire together in radio harness and then connected it to Red on pioneer wire plug. Is that Blue wire on radio harness for antenna?
I have Metra 40-NI12 antenna cable. Debating whether to connect antenna Blue wire to Blue/white or Red accessory wire..
Please, advice.
I would also like to hear the answer to this. Thanks!
Installed on my alpine ilx-w650 and I am having reception issues with the tuner. Could the bypass be the problem?
Do i need a microbypass for my DDX719 and would i hook it up? Or do i just ground the prk to the radio?
Dean-Fernando, Does the micro bypass works with a different brand of after market HU’s? Like Sony?
Why dose my micobypass have 4 wires and it only let's me haf way into my alpine INE-W960 setings
So the dark green on the bypass will go to the parking brake wire from the aftermarket radio harness?
My blue/white is capped off because I don't have an amp. Can I just connected to the radio side?
Agree with Quixote Cassius, A vid on how to install bypass with the 4200 NEX and an RPG-GM11 installed would be awesome!
Steven McMullin yes we are going to have one soon
Is this video up somewhere I need the same help
Legend. My question answered perfectly
Did you install the micrybypass on the side of the harness that connects to the head unit or the cars existing harness?
Senko Bassin' the aftermarket harness that we plug into the car.
Will this bypass work on a Boss double din and a Crutchfield ready made harness?
Hey your videos are great first off i just had a question im looking to install my pioneer avh-1300 nex head unit into a 2007 toyota highlander but the vehicle side harness doesnt have a remote start wire can u help me out on installing my micro bypass thx
IV done this with 4 different bypass and can't get my pioneer avh-x5800bhs to work. Please and help
I have a pioneer avh-x491bhs in my 2014 dodge ram but my sequence is park shift tran to a gear then back to park to get the dvd to work the how would i hook a microbypass
The brain 🧠 working unbelievable
I have an avh5800 pioneer that I purchased a microbypass for that works fine when appradio loads but still says prohibited when trying to watch a dvd or miracast. what do you think I should check for troubleshooting?
Shank Montgomery check the remote turn on out and make sure it has power. Pioneer puts a breaker on the remote wire
Maybe a dumb question... can i still run an amp off of the remote wire?
Does this work on most aftermarket stereos? Even ones made in 2020? Thanks
Hey I just did mine but still doesn't work what also may be is the problem?
Awesome video!!
Big Thanks!!
Hi, saw your video, cool, I have the pioneer avh-501ex dvd/cd player. Got my bypass, all I need to do is connect the bypass to the pioneer? Noo need in cutting into parking brake wire.? Thx
You guys really think of everything.
I am in the process of installing a pioneer avh 2440nex into a 2013 Nissan sentra sr. When I pulled the stock radio out it has a bunch of harnesses attached to it. A blue one, pink one , the antenna, the standard radio plug, and then a larger plug with a bunch of wires. I think the pink is the xm antenna. What is the blue connector (not FM antenna) and what is the larger plug? Do I need to worry about those or just assemble the radio harness to the pioneer harness and attach the radio adapter?
You pretty much answered your own question mate this device connects 2 the blue remote/accessory wire, the black ground wire, and finally the green parking brake wire simple as that.
Great Tutorial, I like all your videos. GJ
Amazing! Thank you!
I fitted mine, it worked once but has stopped working now? I checked all the connections, little confused!
I have a pioneer that has a ready made harness, it has something that looks like a bypass already on it that’s connected to the harness, this was put together by crutchfield, I have the three wires bypass that I purchased separately, would like to send you a pic so you could see it and maybe advise me how to install the bypass, however don’t know how to send you a pic. Thanks for any advice Ray
can i use thats bypass while im using pac rp4-mz11 interface ?
REPLY
see you have a pink parking brake sensor too first one iv seen bar mine is that the one to ground for the daft hsndbreak in no I swing bypass kits as smubsont seen too need them or relays but understand I have a buisness to run but any helps appreciated
+Horticulture and Bonsai est2005 what type of radio is it?
I just hooked one of these to my pioneer 8200nex and its a no go any tips or pointers, instructions says not compatible with avic models any idea why didn't see that part until after i had it hooked up
Dustin Mccutchen yes it is not needed, watch this
czcams.com/video/w6Bznj-RmoY/video.html
Maybe a silly question, but if I don't have that fancy wire-stripping tool, do I just do one cut and push the insulation to the left and right?
I did with a a normal non-automatic stripper. It worked fine.
Nice video it looks easy very professional styles to do it but what if I have and 4 wires
1blue
2black
3green
4yellow
Where do I connect the yellow wire
does this work on a Pioneer SPH-DA160DAB anyone know?
I have a yellow and black wire on the avh x391 headunit side and wonder what set or other color side this one connects to or just leave it capped...
+Cary Varela just leave it capped of. It is for muting the radio if you have OnStar and the right smart harness
Will this make back up camera work?
After watching a couple of vids which is best, install a microbypass or just ground the green wire? I'm interested to know. Thanks
I'm wondering if its because some radios, including newer alpine and pioneer require a double negative, or "pulse relay," I've heard it referred to, as well.
Will this work with the alpine ILX-w650?
thank you. this is exactly what I need
What if the emergency brake wire was already connected? Can you just cut it still and leave it there?
Installed my mico by-pass and now radio will not turn on. What to do?
Great video Dean, great tip.
Tim datoolman thanks toolman
What do you do if you have a maestro installed for steering wheel controls?? Should you install the bypass on the car harness side or radio harness side???
Radio harness side
Thanks friends!!!
What wire cutters do you use?
Does it matter whether it connected on the car side or radio side of the harness
Yes radio side only
@@FiveStarCarStereoInc so if im installing a pac audio kit for my camaro i would install the bypass on the harness that came with the pioneer correct?
Hey Dude, love all of your videos. I just got the Apline KTA-450 and the Apline iLX-W650 still in the boxes. Would to see how you put these bad boys together , your way. Keep up the great work. Peace! ~Sam~
I know this is old, but have you ever had an issue installing this with the 5v remote turnon stepdown needed for 05-09 mustang shaker systems?
did u ever find this out?
CAN YOU USE THE SAME REMOTE WIRE FOR THE BYPASS AND AMP?
D K great question. I’d like to know too
Hey guys- know you're in Cali at the convention and GREAT content by the way. Love the show and your channel! I have question bc i'm having my kenwood excelon installed by best buy "that place that buys best" and i'm sure they're not gonna ground the parking break wire for me. My question is this: I have the microbypass that you're showing there, but wondering if I might be able to just clip the parking break light green wire and ground it to the unit itself or since the harness is already wired up I HAVE to splice into things this way like you're showing. Hope that makes sense.
Just merge the ground and parking wires together, they'll ground to the vehicle. Job done there is a British guy with a video about that.
What kind of stripper is that, that lets you strip a wire in the middle?
They sell those at lowes
$10 at Harbor Freight tools www.harborfreight.com/heavy-duty-self-adjusting-wire-stripper-36810.html
Klein 11061
I hooked mine up and now my parking brake alarm is sounding?.. what didn i do wrong
I have the avh-x1500dvd which have 2 green wires, which one is the correct?
The one that says remote wire what should be actually stamped onto the wire itself or the wire that has a yellow stripe on it (not to be confused with your rear green speaker ground wire which will be green and black). That is if it has one.
Thanks Dean....
I have a Boss Audio System but it doesn't seem to have a remote system remote control/amp blue and white wire. Am I missing something or will it not work on my system?
Bert Collison for that radio you just have to ground the break wire. No Bypass needed
Micro bypass only have to be used on Kenwood and Pioneer receivers and maybe a couple of other top of the line name brand receivers.
I have a 2006 suburban, with the 4200 nex stereo, not sure what else may be hooked up behind stereo, for example my steering wheel controls volume and source... I have bought the bypass but I don't have a clue what I am doing or what I will find wiring/harness wise...
one thing I don't understand in the above video is: "isn't the green brake wire currently hooked up to the brake? so in the video you cut it and splice it with the bypass... what about the other end that is already hooked up to the brake? What do you do with that? in other words there will now be no wire at all hooked to the e-brake? Thanks.
Steven McMullin for the e-Break yes you can cut it and connect and then cap off the car side. We just disconnect and pull the old wire out after it is cut.
Thank you. My only concern now is I don't know if there is some sort of PAC or something else in there to enable my steering wheel controls... in other words I don't want to have to re program something, so I am more than hesitant to tear into it... any suggestions?
I also have a RPG-GM11 installed, the light green wire from stereo is spliced into a light blueish wire that goes into the PAC I think, and the car toys guys wrapped it and another wire or 2 marked NAV? I am also curious on how to reprogram the RPG-GM11 if needed, I did not get any documentation regarding it, so I dont have a clue on how to do that if needed? plus it is burried back under the dash pretty far.
Not sure why the light green wire from stereo would be going into a wire marked NAV? that then goes into the PAC?
On the back side (car side) of the PAC do I assume that the light green wire is the parking brake? and then cut and cap it?
Steven McMullin it sound like the have the break wire connected to the PAC break wire out put. If so to unlock the radio- start with e break off- turn on key- e break on off on. This will unlock the radio. If you would like to reprogram the PAC, they have all their manuals on the web site www. Pac-audio.com .
Can you use one of those plastic taps instead?
you can if you like, sure
How could you add a switch to the micro bypass so that you could disable it should the need arise? If the switch was on it will bypassed else if the switch was off the normal factory intended behavior.
If it matters I have an E46 and a Kenwood DDX9704S
Connect it to the lt green wire
Do you mean put a switch on the light green between the radio and ground?
Thanks for the great video it help alot. Two thumbs up. Keep them coming
Badass + fast. Thank you.
This was excellent
What if u don't connect the remote wire? What will happen?
i have a pioneer avh 270bt and theres no green wire or is it one of the green wires for the rear speakers?
Did you get a wiring adapter kit with the stereo? If so that's where the emergency brake by pass green wire comes from.
Falcon Flooring I actually purchased the radio used and had no idea there was any wire that needed to be grounded or bypassed. i dont know what else to do. Theres no long green wire so im stuck without bluetooth
GREAT videos !!!!!
Not all heroes wear capes. Thanks!
Awesome thanks for the help
Will this work on a 4201NEX? Some have said no but I figure you are the definitive answer.
+Courtney Harrington yes it will totally work. We do it every day.
Thanks. Bought it!
What if my car doesn’t have a remote/antena cable? I mean the blue one. Anyone?
Would this work on the NEW Pioneer AVH-2330NEX?
Ya- Man yes it will
Awesome video guys
The Beige Wonder thank you
Awesome, thanks for sharing all these videos. I wanna ask your opinion on a system I'm trying to put together, it's an all pioneer system from headunit to component mid's, tweets, with pioneer 4 channel ts-w261d subs & pioneer gm 8601 amp. I here the head unit & speakers are good but there amps are not wat say u?
lolo ent we install a ton of them, they are a great sound+ value. Here is the install we did for our Pioneer rep
czcams.com/video/XSJE89avY7s/video.html
Five Star Car Stereo did u attach a link for the pioneer rep if so didn't get it can u send it again love to see it.
lolo ent
czcams.com/video/XSJE89avY7s/video.html
Great video thank you!!!!
+Shawn King thank you