Wire wrap pendant tutorial.

Sdílet
Vložit
  • čas přidán 28. 08. 2024
  • Hello and welcome to my latest tutorial.
    To make this pendant you will need -
    • 0.8mm wire (20g), 4 x 9" (23cm).
    0.6mm wire (22awg) 2" (5cm) and 2 x 1" (2.5cm)
    • 0.315mm weaving wire (28g) 100cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer).
    • Oval cabochon, mine is 25mm by 15mm (you can use a different size, remember to adjust wire length and weave repeats accordingly).
    • Decorations, a little leaf, 2 x 3mm beads, 2 x 2mm beads.
    FOR STONESCART, visit stonescart.com and enter code 'KJJ10' at checkout for 10% off your order.
    I no longer put links to tools on here.
    The tools I use are:
    • Tronex needle nose pliers
    • Tronex short round nose pliers
    • Tronex razor flush cutters
    • Beadsmith flat nose nylon jaw pliers
    • Occasionally I use tronex bent nose pliers
    • Occasionally I use heavy-duty wire cutters
    • Occasionally I use xuron needle nose pliers
    • Bobeeze bobbins (medium size with no extra weights)
    My Etsy shop - www.etsy.com/u...
    Facebook - / kellyjjewellery
    IG - kellyjjewellery
    Thanks for watching x
    Music is free from CZcams;
    Invisible Beauty - Aakask Gandhi
    ©2023 Kelly Jones Jewellery All Rights Reserved
    Please do not copy or share this content!
    This content is created for me (Kelly Jones Jewellery) as a means to promote my tutorials.
    Do not share or reproduce this content in any format.
    Thank you!

Komentáře • 55