Easy Kill Switch install for Moped, Dirt Bikes and everything else
Vložit
- čas přidán 3. 03. 2022
- It's so easy to install a Kill Switch. It's just two wires. I think anyone can do it. They are important so you can easily and effectively shot off your engine. If you need to shut it off instantly, you dont have time to fiddle with the choke or pull the plug boot.
Here are a couple of kill switches that I like.
Simple Kill Switch - amzn.to/35NcRRK
Rocker Button Kill Switch - amzn.to/3MhwJNA
Attaches to Dirt Bike perch - amzn.to/3CmfSoj
#Dirtbikes #KillSwitch #Mopeds
My Gear Links
Main Camera amzn.to/3qw1Cnt
Main Lens amzn.to/3qsSOPf
Wide Lens amzn.to/3pwmOdQ
Portrait lens amzn.to/32ooNbv
Mic amzn.to/3HgkBch
Light amzn.to/3qw2SXJ
360 Camera amzn.to/3euCkjV
Selfie stick amzn.to/3pxJGJK
Not sure if I've said this before, but you should have a million subs. Your tutorials are always informative and perfectly explained.
Thank you! In getting there
I would say the exact same thing
Thank you!
I have been riding around without a kill switch for almost a year now and I finally cared enough to try and fix it . Tried to follow the stock wiring but something is fucked up somewhere and this trick seemed to be the only thing that worked. So thx for the vid. Very well explained
heck yeah! I am glad I could help.
Thanks for making that so simple, jeez!
Yeah man! thanks for watching.
A nice , straightforward tutorial.
Thanks Wayne
@@Corn-ped No problem. I can see you put a lot of thought into the video.
Hey man, love watching your videos. They're all so detailed and informative. Do you have a link to the video where you reference the pigtail wiring you did?
you gained another subscriber. straight forward. thankyou. long live the pigtails.....
Thank you!
I've been doing the cheap on/off switches and of course its on when off. I figure its something to keep people confused if they want to steal a bike. :)
Haha. Perfect
I really like the polini kill switches that DOS sells.
And yeah, kill switches are super easy! Every bike should have one.
Ill have to check that one out!
@@Corn-ped it's out of stock at the moment (at DOS at least), and it's more expensive, but it's so nice. Just the usual polini high quality everything.
I have that same style on my JR80
Awesome ! Ty . Other vids are stupid af !!
Rad! Good luck!
So if I had 2 stators (single fire Harley) I would have to ground both?
yeah, is there are two coils you will need to ground them both.
Love the info, Just the back ground music needs to go
thanks man!
I can't seem to get this to work, my coil is 6v points, does that have anything to do with it? I pigtailed my blackwire from coil and the other wire to ground. My headlight is a puch maxi headlight with a killswitch already, i just need to install an on/off switch with a key for theft deterrent.
voltage doesnt matter. Just use the kill switch to ground out the external coil. That will kill the motor. If its not, you either have the wrong wires or the switch is broken. Do you have a multimeter you can check it with?
@@Corn-ped Holy fk you answered! I got the puch maxi headlight with with 4 wires going to it, yellow, black, grey and brown for ground. Ill have to test the switch with a multimeter because it seems as if it works on and off. Is it a correct assumption to say that its impossible to "killswitch" on a engine with pullstart? Or should it still be possible to ground the entire engine with a pullstarter?
thanks for being an encyclopedia of all the things i care about
@@TeChNoSiX you totally can kill it. Just ground out the ignition coil. The blue wire that goes to the coil. Ground thay
@@Corn-ped Thanks for answering so fast! In my case thats the black. But my earlier question was more of a "can an engine with pullstart have a killswitch with an on/off position so that it cannot start in off position no matter how much you pull"
Ohh yeah if the coil is grounded, it cannot start. No matter how hard ya pull
Would this work on a tether kill switch?
absolutely! I have been looking at magnetic trial bike switched. Those are cool.
@@Corn-ped Thanks! I just wanted to make sure that I can connect it the same like in the video so I don’t short or break anything :)