BMW E39 Final Stage Resistor replacement
Vložit
- čas přidán 25. 08. 2024
- Is your ac/heater fan/blower not working? My blower fan would intermittently not blow at full power. The final stage resistor (FSR) could be the culprit. I replaced mine based on comments I read on the Bimmerfest forums and it fixed my fan.
And no, the temperature readout doesn't flash, that's an artifact from the video.
Part number: 64116923204
FCP Euro part : www.fcpeuro.co...
Amazon: amzn.to/4cLXczE
As an Amazon Associate I earn from qualifying purchases.
Less expensive FSR part from Amazon amzn.to/4cLXczE
Mountain Metric Wrenches amzn.to/3KCqbJT
Bentley Service Manual amzn.to/4cPWQb9
Bosch Wiper Blades amzn.to/3KWh7Qg
Milwaukee ratcheting screwdriver amzn.to/431B3rD
GoPro amzn.to/3NxozlJ
Joby GorillaPod amzn.to/3NvF2a5
LED light amzn.to/44mQueY
Disclaimer: I'm not a mechanic, this video is for entertainment purposes only.
Thank you man I fix my car for 5 minutes, that was easy❤️🙏🏽
Great to hear!
I was going to replace mine this staurday. I ordered a resistor... but it was wrong.. for me it's an regulator.. .the resistor had a lot of more pins and did not have this "triangle" chape the regulator has. (including the older one).
I am hoping I can do a return and get a regulator instead... (:
Great video though!
I used a pair of pliers since the clips were stuck so hard and hurt my fingers 😂
Thank you ! good luck with your repairs!
Thanks, everything went well until this morning, the battery got drained out AGAIN... I have no clue what to do now and it's starting to irritate me more and more now... :(@@e39enthusiast14
Thank you. I fix my car for $30. So fast and so easy 👌
Glad it helped! Thanks for watching!
My heater is blowing very weak. Would this fix it?
Hi, it did for me. That was the problem I was having. I would turn the fan speed on high and it didn't blow much. Replacing the resistor solved the problem and the fan/blower has been working perfectly since then.
@@e39enthusiast14I will give it a try. Thank you😀👍🏻
@@Stian2001 Good luck ! Let me know if it works for you!
Hi. Do you know if it is possible to check whether the "hedgehog" is functional using a computer and INPA? I mean is not to disassemble it unnecessarily.
Hi, I don't know. I have read on the Bimmerfest forums that a couple of people were able to repair the old "hedgehog". I didn't attempt to repair mine, I just replaced it.