Homemade 600cc Buggy Officially STREET LEGAL! (16,000 rpms)
Vložit
- čas přidán 10. 07. 2022
- I finally made my 600cc Croskart street legal! Mounting a carbon wing and body panels.
▶▶Dirt Legal: www.dirtlegal.com/?aff=17/
Support the Artist
Intro Sound Track: / letdown
(MrJay - Letdown)
🔥🔥NEW MERCH!!
shopvasilybuilds.creator-spri...
MY WELDERS:
usaweld.com/?ref=hvpoab1dg65
*USE CODE: VASILY5% for 5% off your next order*
Follow on Instagram: / vasilybuilds
For all inquires email me vasily1fab[at]gmail.com - Auta a dopravní prostředky
If you'd like to support my work check out my jdm Crosskart exclusive hoodies
👉 tinyurl.com/2s2hpr7d
How much for one of these
This is a very impressive build brother. I've seen all of your videos, and I have to say, your skills are advancing at a rapid rate. Keep doing what you love and you will continue to be successful.
This thing looks and sounds so agressive, truly an amazing build, congratulations man. You are a legend
I wish more people knew about him, bcuz there's noone else on yt like him. He should have more than a million subscribers
Facts bro
Grind Hard Plumbing/Cars & Cameras/Rather B Welding Ect
YT does not have 100s of DIY car builders? LOL
@@80sOutrunFan yeah there are tons honestly. Just go down the rabbit hole. That's how vasily was recommended to me lol
@@80sOutrunFan dude he builds gnarly things from scratch. It's the type of builds, which you know is far more difficult to fitting a company built part. U'll say, there's more, but ur just missing the point
Small thing, when you welded your front brakes to the hub you ground your work on the rotor, so the ground has to go through the bearing, thats not ideal. Crazy work man keep it up and its awesome you can now ride it on the streets!
I saw this too, the bearings won't last very long after being micro welded.
When I first started welding I was making an exhaust for a mini bike and I had put the ground on the engine shaft and started welding.....that motor died 2 days later from a rod knock lol 😆
Wow this came out REALLY clean! That thing looks like a BEAST on the street! Keep up the amazing work 👏 I love following your builds from start to finish!
That's Awesome Vasily!Congratulations on getting it legal,and road safe.Looking pretty sweet too.
So awesome...
Can't believe it's possible to register something like that. Must be amazing being on the road with something you built yourself.
congrats on legalizing the ride! looks like a blast!
Probably the sweetest ride anywhere! Best of all you built it from the ground up!
stoked you made it street legal to enjoy and use as a real car; great work!
It's amazing!!! The difference you can tell in a person who put time and work into their vehicle, and someone who just had it given to them!!! Drives with respect, doesn't do nothing too outrageous, cuz he's proud of his work and knows all the work you put in it!!!💪🏻🇺🇲🖤
Awesome mate. Im never anything less then blown away by the cool stuff you build. So impressive and good to see a young guy who still appreciates working with his hands and putting in the hard work.
Working with his hands, and his mind. All the art school graduates are missing the mind part.
I wouldn’t never get off that thing. It’s amazing. Great work.
bro! ..your craftsmanship is so inspiring and proper. thanks for sharing....everyone needs a daily driver like this LOL. this can definitely be done on a low budget if you wanna get your hands dirty :)
I just wanted to say that I really appreciate your/this channel. I have recently just gotten into welding and have been building little project for my three kids. Really enjoy this channel. Keep up the great work !!!!!!!
Front hood looks like a banshee front end almost!!! Amazing job dude🍺 one thing I'm worried about is that rear wing collapsing when at top speeds✌
dude that is so bad ass!!! everything you build is amazing and something that I would love to personally build/ have myself!! thank you for all your creations amd sharing your process with people like me. please keep up the amazing work and thank you 🤘
This.
Nice
czcams.com/video/Y-qS-y4Ok4Y/video.html
ultimate glazing🤣🫵
This is awesome man, it seemed to take forever but was sure worth the wait
This is nuts! So cool! Nice job man! That first GoPro view on the street made me laugh as it looked like something straight out of a video game 🤣
I remember watching you whenever you had around 500-700 subs man I love how much you have improved with your builds and the quality. Keep doing you man and push yourself you can do great things
Amazing achievement Vasily! Kudos to you! 😎👍🏻
I'm definitely going to keep these guys on my radar to get a couple projects I want street legal
Yessssss bro made it happen!!! Such an inspiration, definitely making this happen in the future in Germany. 🔥🔥
VASILY! god has surely blessed your mind and hands! FANTASTIC BUILD! cant wait to see more in the future!
If you can move the tail light to a different spot I'd recommend it. The underside of a wing (on a car, top side of an airplane) is the low pressure side which is much more sensitive than the high pressure side. This is why swan neck mounts exist. So mounting the tail light like that is probably causing the wing to stall and losing basically all of it's downforce. Lowering it a few inches will probably help the wing a lot.
Saw that wing on Instagram couple days ago and I have to say it’s a work of art!
Ahhhh buddy! I was waiting for this video!! I love the sound on this thing. You did an amazing job man!! Looks great!
Great build! YT needs more of this energy and content.
great work looks very cool
the only think i woul sugest is relocating that coolant radiator from above your head because if that thing blow by hitting something you will get seriouse burns
this build alone absolutely puts Vasily up there with grind hard plumbing
Idk man. Vasily is no slouch but Ethan is ground up custom tube chassis beast.
This is the build that got me following your channel a little bit. Just subbed.
How good must that be . Going from having to find somewhere to be able to drive this awesome build to having endless roads . Must be just amazing and so much fun 👍
Congrats! Now I predict a pull over video coming soon 🤣🤙
Omg that thing is a ripper, give this man a gold medal and give his machine a name, and Vasily dude ur amazing keep up the good builds, u should add more body panels so you do get hit by some road debris
Thanks!
Thanks!
Awesome build man its lookin really good. Im glad somebody from Chatt town putn in work. Your gonna start a trend watch. Soon as people see you mobbin this thing people gonna start building them. Proud of you man. Sick azz build
Just found you on my recommended page! Sweet kart man you’ve clearly got a lot of skills. Subscribed :)
No more ridin' dirty! Very sweet summer/fall car right here. Hot? Just go faster!!
A windscreen and hub mounted fenders are going to go a long way. They'll protect you from other cars and other cars from you.
i love how people film themselves breaking the law then get surprised if something happens lol. that being said.....dope ass build.
We love your show in Dallas Texas! Keep up the great work!
It's been a couple of years since I watched any of your vids, not that I didn't like them just to many things to watch and wow you come a long way, keep learning buddy and keep posting. I started watching Boostedboiz when they was young like you and could barely weld and now they race all over.
Hey bud, don’t forget to illuminate that license plate. Cops can ticket you for that. Awesome build
Agreed but if driven at night….don’t need light for daytime.
I had to laugh when you said is there anyone out there that can make me billet spindles that don’t cost an arm and a leg 😂😂😂
He probably can do it
I came here to check out your build and found dirt legal as you sponsor. Definitely have to check them out.
You could place fiberglass around the cart so you don't get wet it's 🌧️ raining.
Keep up the good work. Stay focused. Cant wait till the next one.
That thing is insane! Keep up the good work !
Simulated on my computer that had me rolling!
😂😂 fr
Love the build but every time I see it now I think this should have had the hiyabusa engine with the turbo would decimate everything not really into boats probably because I live in England were everything is illegal
I agree! I have some plans...
And should of used carbon wrap on the cowling to match the wing would look a lot better love this build wish u had plans for the frame I would buy them
Keep up the work bro! The vids are entertaining and the builds are dope as hell! Makes me wanna build one of these now
This thing is so sweet. I would love to have a longer wheel base version of this but more drag oriented. I guess kind of like a more streetable drag rail
There are golf-cart, utv diffs, cv axles and of course spindles that are miata compatable. I went with Lexus Q7 rear differential removed from housing, then removed ring gear and replaced with sprocket. It was the difference maker for all handling issues
What power will it see?
@@VasilyBuilds infinity Q7 has a 455h.p. v8 and weighs almost 7000lbs.
I've got a 100plus hp 870cc 2 stroke twin in a 360lb buggy. Refused to go straight until I installed the diff. 4 different drive train packages and using the snowmobile chain drive reduction put me right on the money. Top speed 58mph mostly off road. But I'm unhappy with the drag of all 3 spinning shafts. I need an overall 7.5-8.5 to 1 final drive and need a gearbox setup that will take secondary pulley.
@@VasilyBuilds I got a cx650 street bike and it's shaft primary from rear engine housing. Gang of torque might give it a go.
@@VasilyBuilds just get a miata rear differential, mount the engine transverse, and connect engine with chain drive (1-1 ratio here). The 3.36-3.78 ratios from diffs should put you around 65mph top speed with 22" tall tires.
@@VasilyBuilds don't forget golf carts and utvs share common lug patterns with many quads.
Whats the weight
Thanks for the Dirt Legal tip man. I’m working on a 5kw “moped” and I’ve been stressing since I live in NYS. They will be my first call when it’s ready to go.
Looks awesome. I'll have to check out dirt legal for my mini bike. Keep em coming.
looks like offroad F1 car
How fast is it ?
Guess we will never know....
120mph
Love the T-shirt! Long Live 2 - Strokes, Indeed!!
I'm building an Off-Road buggy with a 1994 Yamaha VMax 600 snowmobile engine. I love the sound of a two-stroke. I use Klotz snowmobile oil and it smells great!
Thanks for the inspiration and also the info of how to get an off-road buggy licensed for on-road driving.
Hell yeah, congrats dude!
When will you paint it?
I have to pull the engine to paint it, something that I really don't look forward to doing for no reason :/
@@VasilyBuilds i understand i have a project to and had to paint it, it was a pain. great build
Excellent video. Love the home made steering knuckles.
This made my week. Legal boooy. Love it
That was a great simulation! technology is crazy! love the build brothaaa
Nice man! Every time you add a piece I like it more!
Awesome!! Very cool project and dirt legal is good to know about thanks i will be using that
Been watchin since forever love the content an always will 💯
You have came a long way. We going to the top!!!
Dude this is too fricken cool idk why it didn’t pop up on my subscriptions. Keep it going!!
That thing is sweet. Keep up the awesome videos bro
Nice car and nice build. U have the right motivation to do this work. U also have some great tools to work with including a great dad it looks like. I did the same thing sort of when I was 16-19. 77 now. But no dad and no help all my own little bit of money. Just built the prototype for the first funny car back in the mid 60's. Don Garlits saw it and came to my home to see how I put a 427 ford engine with Algon injection into the front seat area of a 57 ford Fairlane. Built my own fiberglass front end, moved the front tube axle forward 21" and back axle up 10", and car weighed 1700 lbs. Detroit drag strip didn't know how to categorize it. Car was street legal. The next year Garlits had a full blown funny car and the rest is HIS history. I sold the car to a high school and went to Vietnam. That was mine.
Dude!! BadA$$!!!! True Masterpiece!! Amazing content!! I've waited a long time to see you ripping this thing!! When you went from the cr500 to a gsxr600 I was so pumped!! I'll definitely be using dirt legal in the future for something very similar! Now you need to work out any kinks, get comfortable with it and go hurt some feelings! I'm curious what the 0 to 60 is and what it would run ⅛ and ½ mile. Just be safe dude!! Truly one of the top builds I've seen build on yt 👏 👌
so epic! looks like a blast to drive 😍
it has been my childhood dream to make my own 4 wheeler and drive it to school to flex on the kids and this truly inspires me
you do it!
Man I even sat down and started to design one three or four years ago, thank you for the inspiration to add to the list
Very well done must be so fun on the streets
Awesome build looks like a lot of fun 😀 😄 👍
if i could have a fraction of your fab skills i’d be happy, you got some real talent man 😳
I used dirt legal to get my Dirtbike legal in Florida, the dmv told me I couldn’t do it but dirt legal got it done! I’m thankful for them and they did a great job!
So you were able to get a FL plate for it by going through Dirt Legal?
@@K.J.Ray421 yeah, it was easy. Just cost me like $300 but they do all the work for you. It’s the best way I know how to get a dirt bike or any other off-road vehicle street legal.
@@K.J.Ray421 I 100% recommend it!
I’m so happy I’m subscribed to you, my Sur Ron wouldn’t be on the road otherwise. Had no idea it was even possible to get stuff like that legal. Crazy what loopholes these guys are able jump through lol
How do you get a sur ron? those things are like, 11 grand
I wanted to build something just like this in my 20’s great job dude.
Great build! You like driving on the other side of the lines😆
Thanks for the dirt legal tip. That's awesome.
Vasily puts his leg fracture behind and zooms ahead. Very inspiring. I see he has a rear diff with half shafts powering the rear wheels. This makes his ride less prone to drift while turning at high speeds. A chain driven single rear shaft is good for off road drift but is hazardous on the road.
Awesome video. Enjoyed watching . Thank you . For your next challenge , a 2 stroke - 4 stroke hybrid!! 2 drive shafts in to 2 diffs on same axle ??? AWD Front 2 stroke rear 4 stroke ? 🙄 That would be wild ! Turbo?
Incredible work…ready to see jet boat in action too.
hell yeah Vasily! This is great!
👍 on the heat on the cast. Spot on the correct way.
I would love to drive this on the streets where i live damn!! So cool and awesome build! 😀😀👍👍😀
thank you so much. I will be using dirt legal here very soon
you're literally living my dream !!😂😂😂😂....waking up to build whatever comes in mind
Love the intro song very smooth and melodic.
dude that thing is absolutely sick. New personal dream build
DRIFT THIS BEAST!! DRIFT THIS BEAST PAL!!
Hell of a job buddy! Hell of a job!
If you still need more down force, you could make mudguards on the tires and add flairs to them for extra down force on the wheels. :). Keep the content coming, you are one of the most unique builders on youtube! :)
That thing is BAD!!!! I would take one in a heart beat! You did an AWESOME job!!
Nice build but I have one suggestion for you. When welding on anything...... Always keep your ground on the base material or clamped to a grounded table. Clamping it on the brake rotor means all your current will be flowing through your bearings.In a ideal bearing situation there should always be a microscopic film of non conductive grease. You have effectively created many pits on your races and rotors. Chances are you will be fine. Just something to be mindfull of when doing these fun and amazing builds.
Congratulations looks great keep it up buddy.
Welds look great. Nice job
Dude that is a awesome build!