Hi After setting the motor working automatically when pressure loses, the motor runs only in Delta. Visually we checked the Star contact, not working. Can you explain why the motor is running directly Delta.
hello, for that you can check the wiring of the motor, and secondly remove the motor contact from the controller and run just the controller without any load, check this 2 and update me thank you
@@marwanmostafa5288 remove the load from the controller and try running the controller alone, if it works,then check you pump termination, update me once done
HELLO THOSE THAT ARE ASKING FOR PASSWORD,PLS ANYONE WHO IS AN AUTHORIZED USER HAS TO HAVE THE PASSWORD FROM THE SUPPLIER TO MINIMIZE MORE DAMAGES TO BE CAUSED WHEN ITS SHARED HERE ....PLS CONTACT YOUR SUPPLIER THANK YOU
Great video keep it up ....very nice explained 🎉
Very useful video thank you sir 🙏
Hi, and the default password is......??
You press Stop push to stop pump?
Excel excellent fire system
Max Pressure of PT1 is 1 to 600 PSI
What is the possible cause in tornatech spklr pump showing phase loss L1 when running. What checks to be done can help me ? Thanks
My be that can from current Transformers CT
Hi
After setting the motor working automatically when pressure loses, the motor runs only in Delta.
Visually we checked the Star contact, not working.
Can you explain why the motor is running directly Delta.
hello, for that you can check the wiring of the motor, and secondly remove the motor contact from the controller and run just the controller without any load, check this 2 and update me thank you
Dear I have a question
Pressure down from 118 psi the pump was started but why not give pressure there have mention (pump on demand))
check your sensing line
I have 2 pump electric and diesel pump but both controller showing different pressure how to make equal please explain
you have to calibrate the pump controllers
Different pressure showing in the controller panel so why need to calibrate the pump ?
Hello brother my electric fire pump trips when shift to delta
@@marwanmostafa5288 remove the load from the controller and try running the controller alone, if it works,then check you pump termination, update me once done
How to find run hours of pump
Hello, where do I change the IP address?
How we can solve pt sensor fault
Pump didnt stop by cut out pressure .. and cant stop automatic .. cut out 8 bar but it still running
Bro check set pressure also check cut of time
i thank i know you? 🤔
how about fire pump tripping power how to resit?
If it's persistent remove the load from the controller and try powering it on if it comes on inspect Ur motor it may be faulty
How I can runing manual
@@user-mv8yo4ur2t just push the green button it will run manually
How can put password
HELLO THOSE THAT ARE ASKING FOR PASSWORD,PLS ANYONE WHO IS AN AUTHORIZED USER HAS TO HAVE THE PASSWORD FROM THE SUPPLIER TO MINIMIZE MORE DAMAGES TO BE CAUSED WHEN ITS SHARED HERE ....PLS CONTACT YOUR SUPPLIER THANK YOU
What is the password?
You got?
No update?
135lsu
Any one know about default password
You found password?
what’s the default password plz help me.
@@MrShadab7 no brother
135lsu
@@umarfarooque6155 if this level 2 password