Mate nice job on the boat restore..just picked up my tinny last week and you have given some great ideas on how to deck it out. Cheers Paul from Melbourne
I have recently purchased a similar boat and have been looking for a long time at restoration vids. Yours by a country mile is the best ever!!!! Second to none. Thank you for all the inspirational ideas and possibilities.
Great job building and filming this project👍 if I stored my storage containers under the back part of the casting deck, they would eventually come sliding back out at me with tackle everywhere😂
@@keyansmall1298 thanks for the awesome feedback. yes it is marine carpet. I wouldn't suggest using normal carpet because it will rot once water is on it especially salt water. marine carpet is best because it wont rot. it was $45 per meter and well worth the $$$$ have a look at RTM store or even BCF they have great prices. thanks. :)
wow you are a Beautiful Father and the diligent work. you had done on that Tinny is amazing. Wish you and your Family. many blessings and good luck fishing also my Husband would like to know. where do you buy the Rego stickers?
Hi thanks for your message :) its awesome. I got the rego stickers from ebay heres a link www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=boat+rego+stickers&_sacat=0 if the link doesn't work just go into ebay and type in BOAT REGO STICKERS, You will be able to choose a font aswell. thanks and have a great day :)
@@oliverharper2507 awesome if you do a coat of primer it will be better to use etching primer it will be a two piece primer. It’s way better for aluminium boat 🚤
Hay bud I don’t have a spray gun but even if I did have one I would have still just used a roller. For some reason with the 2 part paint when you roll the paint on it flatten itself out. It sort of look like the paint stretches. I’m doing another boat at the moment and rolling the paint on aswell. The results of a spray gun will look better but I don’t mind the results of using a roller because it’s a neater job. The spray from a spray gun can get messy..
Excellent video and entertaining with it, well done. Have a Savage 3.66 tinny very similar set up just finished getting it ready for the water. Installing a few stainless handrails so grandkids can hold on. Mine has a 7.5 Johnson and will pull 25 KPH lightly loaded in smooth water, and cheap to run as my last boat was a 16 footer with a 90HP Johnson and it would burn 60+ litres for a day out. This little one uses 10....... Cheers
Thank you for liking the video it was fun to make it and yes you have a nice little boat to play with. Have a great weekend bud I’ll be doing another boat very soon. Just shopping for one ti rebuild
Hi Anthony, If i can remember I used 3 Liters for the outside with thinners and 4 liters for the inside. its always better to get more because in the future if you scratch the boat you will have spare for touch ups
@@anthonymurphy2754 hay bud you would use 12 mm for the floor but if you do make sure you install aluminium ribs so the floor doesn’t bend or sink in. 12mm should be fine and light this is for the floor in general. With the casting deck I would probably use a bit thicker wood 🪵 15mm or even just 12mm again hope this helps
Good on ya mate gave us so much inspiration for my tinny project and hope you and your family have a good year fishing 👍🏻👍🏻👍🏻
Thank you glad you guys liked the video. It was hard work making it thanks and hope you have a great fishing year ahead :)
cheers for sharing great vid mate
thank you brother is was fun making the video. my next build will probably be a half cabin boat :) 🛥
Mate nice job on the boat restore..just picked up my tinny last week and you have given some great ideas on how to deck it out. Cheers Paul from Melbourne
no problem brother and thanks for the awesome comment, hope you enjoy your boat build its great fun!!
I like the look with sandpaper blue and yellow looks vintage or relic 😅👌🏼🤙🏻🤙🏻
Yes definitely ✌️
Nice video Leth keep up with the good work
Thank you bud 🙏🏼
Very good video really enjoyed it learnt so much and you are very good at explaining it
Thank you glad you liked it. Hopefully I’ll be making another one soon. Thanks 🙏🏼
I have recently purchased a similar boat and have been looking for a long time at restoration vids. Yours by a country mile is the best ever!!!! Second to none. Thank you for all the inspirational ideas and possibilities.
Hi thanks for your feedback is great to hear this and very motivating thanks again hope to see you have fun restoring the boat 🚤:)
buen trabajo a migo bendisiones muy creativo
Sorry bud I don’t understand haha 😂
Great job building and filming this project👍 if I stored my storage containers under the back part of the casting deck, they would eventually come sliding back out at me with tackle everywhere😂
Thanks bud yea I would probably use bungees or something to secure the box :)
Minnie after car lessons for future
Legend bro
Thank you glad you like the vid lots of hard work 😓
Mad vid mate just got a tinny same size and want to make a casting deck aswell so thanks that helped me out a lot.
Also was that marine carpet expensive or is there somewhere to get it cheap?
@@keyansmall1298 thanks for the awesome feedback. yes it is marine carpet. I wouldn't suggest using normal carpet because it will rot once water is on it especially salt water. marine carpet is best because it wont rot. it was $45 per meter and well worth the $$$$ have a look at RTM store or even BCF they have great prices. thanks. :)
awesome build job.
Thank you lots of hard work but it paid off. Want to make another one one the new year but bigger boat 🚤✌️
Boat looks awesome man, thanks for sharing
Sure no problem 👍🏻
best tinny restoration video going! seriously good job
Thanks bud it was great fun making it. I want to do another one sometime soon. Feel free to share this video bro thanks 🙏🏼
wow you are a Beautiful Father and the diligent work. you had done on that Tinny is amazing. Wish you and your Family. many blessings and good luck fishing also my Husband would like to know. where do you buy the Rego stickers?
Hi thanks for your message :) its awesome. I got the rego stickers from ebay heres a link www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=boat+rego+stickers&_sacat=0 if the link doesn't work just go into ebay and type in BOAT REGO STICKERS, You will be able to choose a font aswell. thanks and have a great day :)
i was talking with my dad and he had this stacer i think, then the supa skuas came out so i will probs show him this video 👍
Awesome show him bud
Great video man, thanks for the watch. Cheers
No problem Troy thanks for watching:)
Blood sweat and tears but it all paid off at the end boat looks awesome!!!
Thanks bud yeah very true just keep on pushing haha 😆
Great video mate! Watched the whole thing, it was awesome
Thank you brother glad you liked it. ✌️
great video mate, just bought a tinny the same size and am looking to do a similar job👍 very helpful to see the process behind everything
Thanks Oliver it’s was great fun, you will have a blast doing it up. Thanks bro if you make a video send us a link :)
I’m planning on doing another one up but just have to find the right time
For sure bro, i've just been searching around to see if any shops in WA sell the Norglass paint and primers
@@oliverharper2507 awesome if you do a coat of primer it will be better to use etching primer it will be a two piece primer. It’s way better for aluminium boat 🚤
great video man, love the work!
Thank you Luke
Why did you roll the paint instead of spraying it ?
Good job overall well done
Hay bud I don’t have a spray gun but even if I did have one I would have still just used a roller. For some reason with the 2 part paint when you roll the paint on it flatten itself out. It sort of look like the paint stretches. I’m doing another boat at the moment and rolling the paint on aswell. The results of a spray gun will look better but I don’t mind the results of using a roller because it’s a neater job. The spray from a spray gun can get messy..
Well done Aussy
Haha thanks mate 💪✌️
MAte such a good vid. cant wait to get my tinny looking shmick aswell 🤙
Thank you bro it was fun making the video aswell
Ultimate Jack fishing boat around Gold Coast
Yes for sure, target those platoons 🎣 it’s a great boat. Thanks 😊
Excellent video and entertaining with it, well done. Have a Savage 3.66 tinny very similar set up just finished getting it ready for the water. Installing a few stainless handrails so grandkids can hold on. Mine has a 7.5 Johnson and will pull 25 KPH lightly loaded in smooth water, and cheap to run as my last boat was a 16 footer with a 90HP Johnson and it would burn 60+ litres for a day out. This little one uses 10....... Cheers
Thank you for liking the video it was fun to make it and yes you have a nice little boat to play with. Have a great weekend bud I’ll be doing another boat very soon. Just shopping for one ti rebuild
Hey mate nice clip ! Can you please tell me what model this boat is ? Cheers mate
Hay bud thanks it’s a Stacer, roundabout not a punt on did mention in the video it’s a punt but it’s a roundabout thanks 🙏🏼
New subscriber Coast Tripz. Sorry Champion. Thought I subbed your channel earlier. Always keen to support a fellow boating outdoors channel 😃👍🐟🐟🚤
Thank you. Keep up with your awesome videos bud :)
@@lethosadventures Sure will. Thanks for your support too 😃👍
Just bought the same boat for a project tinny/roof topper. Did the timber framing add a lot of weight to the front?
hay bud, no so the total weight if the castring deck was 25kgs it wasnt much even thos it looks like a lot.
Great build,, what undercoat did u use
Hay bud I use a brand called norglass all surface primer it’s a marine paint here the link www.boatingandrv.com.au/norglass-norust-all-surface-primer/
Hey mate what type of primer and paint you use
I used norglass paint and primer
Hi mate, great vid I’m painting a similar size bot how much paint would you have used overall?
Hi Anthony, If i can remember I used 3 Liters for the outside with thinners and 4 liters for the inside. its always better to get more because in the future if you scratch the boat you will have spare for touch ups
Would one litre of primer be enough
Cheers
@@anthonymurphy2754 tri it and if you run out then get more
Thanks for getting back to me mate, as my tinnie is small, what size thickness ply did you use, trying to keep the weight to a minimum
@@anthonymurphy2754 hay bud you would use 12 mm for the floor but if you do make sure you install aluminium ribs so the floor doesn’t bend or sink in. 12mm should be fine and light this is for the floor in general. With the casting deck I would probably use a bit thicker wood 🪵 15mm or even just 12mm again hope this helps
Are you in Canada?
Hay bud no sorry but Canada 🇨🇦 is on my bucket list tho. I’m in Australia 🇦🇺 near the Gold Coast
Fix the leaks first acetone is for cleanig ally and use epoxy right through