How to overhaul your Tomos old type front forks | Tutorial
Vložit
- čas přidán 29. 07. 2024
- Parts and Supplies for this wrenching session:
Tomos steering head set: www.tomoshop.nl/balhoofdset-a...
Front fork steering lock: www.tomoshop.nl/stuurslot-oud...
Ball bearing grease: www.tomoshop.nl/eurol-kogella...
Nylon sliding bushing old model front fork EBR: www.tomoshop.nl/nylon-glijbus...
Front fork dust cap old model: www.tomoshop.nl/stofkap-voorv...
Ball head nut shim thick: www.tomoshop.nl/balhoofdmoer-...
Ball head nut shim thin: www.tomoshop.nl/vulring-balho...
Ball head ring: www.tomoshop.nl/balhoofdring-...
BEARINGS HEADSET MOUNTING TOOLSET: www.tomoshop.nl/balhoofdconus...
In this video, we show you how to replace a steering head bearing set for your Tomos A35 and how to overhaul the front forks. We show all the necessary parts and give handy tips & tricks to get your moped steering smoothly again. Don't miss a single detail of this essential maintenance for your Tomos A35!
🔧 Ball head bearing set replacement
🔧 Overhaul front forks
🔧 Required parts and tools
🔧 Helpful tips & tricks
Welcome to Tomoshop, the shop where everything revolves around Tomos! Also our youtube channel will be nothing but Tomos, showing new products, testing, boosting and of course riding! Presented by the Mafketel of the Moped World: Stijn!
What else would you like us to make Tomos videos about? What setup might need testing under the Tomos such as 50cc Airsal, 65cc Airsal or a 65cc or 70cc Alukit? We can also test a custom exhaust for under the Tomos, as we have these in stock. So be sure to put in the comments what else we should film for the Tomos!
With over 10,000 different parts, we are the biggest on the market so always check Tomoshop.nl for all your Tomos Parts!
SERIES:
- The Exhaust Test: bit.ly/Uitlaat-Test
- Blue to Yellow License Plate Testing:bit.ly/BlauwNaarGeel
- 1 Minute How-to: bit.ly/Tomos_How-to
0:00 - Intro & explanation of front fork differences
1:30 - 1 Equipment & dismantling other steering parts
3:32 - 2 Dismantling the front fork
5:16 - 3 Removing bearing shells from steering head
6:11 - 4 Dismantling the front fork
7:11 - 5 Front fork leg stripping & inspection
5:05 - 6 Inner leg inspection & overhaul
12:25 - 7 Steering lock replacement Tomos A35 old type
13:09 - 8 Steering head bearing overhaul Tomos A35
14:47 - 9 Front fork assembly in Tomos
15:27 - 10 Crown plate and secure with rings
16:30 - 11 Rebuild Tomos and outro
#Tomos #Tomoshop #moped - Auta a dopravní prostředky
LET OP! Helaas bij het opnieuw monteren van de voorvork draaien wij de lager schalen om! Dit betekent dat de lager schaal die wij nu boven monteren, onder moet!
I'm just starting a general renovation of my Tomosino. I watch all your videos. Very good science.
Thanks you Daniel! Good luck and if you have any questions, feel free to ask! Tomoshop.nl
That's great to hear Daniel! Make sure to send us some pictures of your Tomos!
Waar blijft de crosser?
can you lower the front fork by cutting some of it off orr is there ohter ways?
Wanner weer crossen update
Als je niet wil dat de kogeltjes eruit vallen kun je ze opvangen met een goede sterke magneet. Scheelt zoeken.
Handige tip 👨🔧
Goede tutorial tomoshop
Ik heb een vraag als ik hoog in de toerenteller zit komen er knallen uit de cilinder wat is dit
Touning 😢
@@JoostDeAap ja mr k heb een 65cc met 15mm carb en 26 24 vertanding
Het zou kunnen zijn dat je ontsteking verkeerd staat. Bij detonatie kan dit gebeuren. Anders zou het alsnog je ontsteking kunnen zijn, bijvoorbeeld je bobine die some niet vonkt, benzine opbouwt in je cilinder en dan ineens wel vonkt
@@tomoshop mijn vader heeft gekeken de ontsteking staat goed en hebben hem nu goed afgesteld maar het knalt nu nog harder
Bij mij waren de onderste glijlagers naar boven gegaan.
Aai.. goed dat je het open gehaald hebt dan!
Mooie video maar je kan net zo goed een nieuwe kopen voor een paar tientjes
Zou kunnen! Deze week in de weekdeal 😜
Wanner weer crossen update