Looks good. I've been thinking about getting one of these. Not the same one though. Maybe the Lancers got mess up center stands because I cant imagine how mine got bent up. I took it off.. My ancient Jonway stand looks perfect compared to my Lancer stand. It's funny my gas gauge has never worked. Must be a Lancer thing.
Yeah, mine was garbage from the 1st day. This one is about 1 1/ inches smaller than original. I don't know if I would put it on my motorcycle though. I have seen a couple of broken ones. Maybe to much weight.
I bought one of these last year, and it started rusting slightly about 2 weeks later. Also one day it's decided to just snap in half, making my bike fall over in my garage. I have a pretty light 600cc bike, about 180 kilograms, but it couldn't even support that long term, even though it's supposed to be rated for 500 kilograms. It was cheap, and as with most cheap things I guess you get what you paid for - lessons learned.
I have the exact one mine is red you know we have the same bike mine is just in the black and silver I had mine adjusted all the way down the piece you put your foot on to kick it out has to be pretty much all the way out the embarrassing part was I did not take the side panel off I just got up underneath and lost where the spring went took an hour to figure out how to get the spring back on freaking embarrassing anyway enjoyed the video catch you on the next one brother
Oh yeah, I know we have the same bike my brother. I was thinking of leaving my panel on too, just needed you guys to see what I was doing. I hurt my left elbow, fooling around with that spring. At some point very soon, I will be purchasing an actual motorcycle lift.
That looks way smaller than it did on the website 😂. Looks like a pocket knife. I was going to put this on a 900lb bike but it looks like it would snap in half or at least bend 😢.
Thank you so much! I just got this kickstand yesterday. Too hot to install so doing it tonight. I’m an old lady and this really helped! Thanks
No problem, wish I had the heat problem, but it's still is only reaching 50 degrees in Michigan.
Thanks for the video, it was very helpful. And you right, it didn't come with instructions.
No problem bro, Glad it was helpful.
Very good video...I enjoyed it.
Glad you enjoyed it
Looks good. I've been thinking about getting one of these. Not the same one though. Maybe the Lancers got mess up center stands because I cant imagine how mine got bent up. I took it off.. My ancient Jonway stand looks perfect compared to my Lancer stand. It's funny my gas gauge has never worked. Must be a Lancer thing.
Yeah, mine was garbage from the 1st day. This one is about 1 1/ inches smaller than original. I don't know if I would put it on my motorcycle though. I have seen a couple of broken ones. Maybe to much weight.
I bought one of these last year, and it started rusting slightly about 2 weeks later.
Also one day it's decided to just snap in half, making my bike fall over in my garage. I have a pretty light 600cc bike, about 180 kilograms, but it couldn't even support that long term, even though it's supposed to be rated for 500 kilograms. It was cheap, and as with most cheap things I guess you get what you paid for - lessons learned.
Sorry to hear that. Yeah I think I would go a different route for my R3. The lean of the bike seems it would put way to much weight on the kickstand.
That really doesn't look bad at all bro! I won't be riding for a while...I'm all laid up. I got the itch soooo bad. Take care my brother.
Come on bro, you know I'm gonna ask what happened? Hopefully no bike related issues!
@@kachiskid no not bike related stuff but did require surgery... really sucked
So sorry to hear that. Well I ride for you, until you can get back on yours. Let me know if you need anything, 4real!
@@kachiskid will do brother..thank you
I have the exact one mine is red you know we have the same bike mine is just in the black and silver I had mine adjusted all the way down the piece you put your foot on to kick it out has to be pretty much all the way out the embarrassing part was I did not take the side panel off I just got up underneath and lost where the spring went took an hour to figure out how to get the spring back on freaking embarrassing anyway enjoyed the video catch you on the next one brother
Oh yeah, I know we have the same bike my brother. I was thinking of leaving my panel on too, just needed you guys to see what I was doing. I hurt my left elbow, fooling around with that spring. At some point very soon, I will be purchasing an actual motorcycle lift.
I removed my centerstand coz the spring flew away and i almost damage my exhause pipe. I cant wait to try this
Whoa, that sounded pretty dangerous. Keep the old kickstand, just in case.
@@kachiskid yup.thats what i did
How is it holding up? Is there any sign of it breaking or even bending?
Holding up great. I have even removed the center kickstand, that I'm so confident.
do it last long?
Yup. Still on and working strong.
That looks way smaller than it did on the website 😂. Looks like a pocket knife. I was going to put this on a 900lb bike but it looks like it would snap in half or at least bend 😢.
I would put this no where near a bike that is over 400lbs.
I was here to see how you put the spring on?
With a lot of pulling force.
@@kachiskid I almost lost my eye putting mines on
At 41.1⁰F, I die.
Yeah, not comfortable at all.
Sir It's applicable in all bikes
Not really. It depends on the weight of the bike. I wouldn't but it on a Honda Goldwing.
@@kachiskid ok but it's applicable in splendor
@@chaitanyaraut4881 what type of bike are you putting it on?
@@kachiskid It's 4 stroke hero honda splendor plus bike
at Kerb Weight 109 kg, you should be good to use one.