Extreme BMX Repair Using the WRONG TOOLS!‼️🤯
Vložit
- čas přidán 25. 03. 2024
- Watch along as we push our BMX workshop skills to the limit.. With this Extreme BMX rear wheel revival inside the skatepark! 🚀🔥 Without the correct equipment, we’ve used our imagination & BMX restoration mastery to turn this worn out wheel into a special custom front wheel! 🤩♻️
.
Follow us 👉 @t77bmx 👈 RIGHT NOW!‼️ So you don’t miss our next Extreme BMX rescue mission! - Hry
Ah you made a front wheel from a rear wheel! Great idea
He’s tuning it
可以翻译吗
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
❤❤❤❤❤❤
@@user-gy1ej9tq7hah kau membuat roda belakang menjadi roda depan.
Chilling under the ramp at a skatepark while its raining is a vibe
Or not well😢😢😢😢😢😢😢😢
Yeah it is. The rain, the wind, the cold but you're in a little pocket of shelter. The feel of the cold steel, the sound. I can imagine it.
@@Christopher-ko9opperfectly described. While reading this, I was sent back to the very old skating days ❤️
And probably sitting in piss 😅😅
@@goodhouse91021 lol don't ruin it!
Bro reinvented the wheel.
Underrated comment
Damn I thought the same kudos
Retuned the wheel more like it
A shit vibe 😂
Not really... wheel builds are a pretty common thing...
“Mum that strange man’s under the ramps again”
Hahaha 🤣
Keeps the park cleared though 😂😂
I was feeling like I was dumb, but then I saw this short and it made me feel better.
very good 😂
😅
why ??
@@mirza6399 because he turned a back wheel into a front wheel
😁💯👍😆
The patience you have to have to to true a wheel is insane.
Yes I am a dirt bike rider and grew up working on them. One job I will never ever do again is respoking a rim. Fk that I just buy new rims when I need them
Used to work in a small town hardware store shop that did a little bit of everything, this was one of, if not my least favorite things we'd fix lmao. Soooo time consuming
We used to just use the brake pads to gauge them. I think it took me around 3 hours to lace and tru a wheel
I was thinking the same thing
I actually love building wheels. Best I've done is on my Hyper and i built both in about an hour and a half start to finish.
Yeah that alignment was accurate as hell😂
I can't lace a.rim in my house let alone ina park in the rain with wrong tools😂
I was gonna say very, very good, although I’m just gonna keep it positive very good very good content very good content you Musta had a good father or a good guardian to show you some stuff about mechanical
Me too. i have one sitting in my front room for months
trial and error. practice makes perfect
This and 10 speeds is the worst of bike building
@@conorharford5117pppp😊ppp😊pp😊pppppppppppppppppppppp😊ppppppp😊p😊😊pppppppppppppp
Гений. Ломал заднее, устанавливает переднее.
Yes! We needed a front wheel and this rear Rim was in perfectly good condition, so we recycled it! ♻️
Only a real rider can do this. Back in the day we’d take our bikes apart every morning and tune everything up. Awesome 🤘
Yeh you tune your sit heights.😂
It's a bmx about the only things changing is seat height and tire pressure.
@@fotis3v480 get fuckin' rekt. You just got boomersplained to.
Love you both, much love and respect. Hopefully you both can resolve your differences respectfully.
He literally turned a back wheel into a front wheel. He’s got 2 front wheels now
Наши руки не для скуки,
Работа, ради работы.
Продолжаем в том же духе.
We made a NEW front wheel for someone to ride down the skatepark! Glad you enjoyed the content
qeq
ему бы в армию бордюры красить
This the kinda sheet I been doing my whole life man 😂😂😂 I appreciate this video 😂🤙
chops back wheel. but back wheel is there when he is under the thing, then puts in a new front wheel?
Creo q es para poder centrar la rueda, puede utilizar el trinche como guía
@@jopequi weon lo que dice es que despues de cortar la llanta trasera, monta una delantera pero al montar la delantera hay una trasera montada
@Ferrari255GTO cutting rear spokes, a wheel is complete.....made up of a tyre (the rubber bit) a rim (the metal bit the tyre sits on) spokes and a hub (the centre piece in question). Can confirm he never cut a tyre. Yes he did mount a rim that was on a rear hub to a front hub, probably bought a new rear complete then used the old one as its a sqaured edge rim....most g sport or skylark front rim's have a rounded edge....he wanted matching wheels not one rounded one squared in a set
@@elite_riddimzgaming3427 yes, i know what both spokes and spoke nipples are, i was generalizing. Also llanta is Rim, not tyre, tyre would be Neumatico o Cubierta
yep. you're exactly right. it's a total setup oopsie video
When u feel dumb, just remember this guy exists
try doing this urself bucko
Look at the caption first
Useless comment
Yeah when I feel dumb I'll just remember you.
😂😂😂😂
Video ended when he found out how difficult is to true spokes by eye
Hahaa! 😅 Yes we actually finished it off inside the workshop using the tool. But this method is possible… just very hard like you said!
@@T77BMX good video!, i even adjusted mu wheels some time ago, lateral truing is easy but having a round wheel isnt! haha cheers keep on the good work
@@T77BMX if you start by threading every nipple just to the point where every t hread is covered, known as "zeroing spoke nipples", every spoke will be evenly threaded and you can then just add 2 turns per spoke at a time going around the wheel until its tight. if it was a good rim to begin with and proper length spokes you will get a true wheel
Yeah I’m just gona pop down the bike shop and buy a new wheel
Chicken
@@FrustratedBaboon definitely mate but tbf I know if I did it my bike would never work agin
В этом теряется весь вайб DIY.....
@@Tim_On_Line 🤷
You a real one my guy.
Thank you my brooo!! thats too kind 👊👊
Bro made it look way too easy
It's called editing....
Just happened to have the right length spokes with him but not the right tools 😂
😂😂
The unemployed friend on a Tuesday afternoon
HAhaha. Not quite... But thanks for the comment! 🤣
@@T77BMX entirely satire, turned out great and you did something I never knew before.
I really spoked to see the end result, amazing 👏
Thanks brooo!! 🤣👊
Anyone who actually rides knows most g sport and skylark rims that are front mounted have curved walls not squared ( for brake purposes on a rear only brake set up) so he obviously wanted a complete matching wheel set not a curved and sqaured so hes put a squared rim on a front hub so both front and rear wheels match
Now i understand lol ty. My ocd would probably have me do the same... but minus doing it myself 😂
Thank you for explaining. I was confused
This deserves way more views.
Thank you so much bro thats awesome!!! 👊👊👊
My man's went on Straight tweaker status
HAhahaha 🤣
FTP G*59
G59 till the grave
pro in truing dangg!
Brought me back in the days when I used to work in a bike shop and one of our specialties was creating wheels from scratch, not an easy job. 😊
The people who made the bike be like 😭
No way you did it at the skate park, thats hard core bro 😂😅😊
Hahaha my guyyy!! thanks brooo much appreciated 👊👊👊
wheel building kinda goes hard ngl
This is an influencer that can actually teach you something
Thanks a lot Bro! 👊👊
I'm stuck at step 1. Now doing it to other bikes to gain enough experience for the other steps
Ohhh nice!! Haha just the sitting spokes? 🤣🫡👊👊
And then you forgot a Torx Screwdriver 😜
Hahah yes that would be even better brooo!!! 👊
Bro demolished his old wheel to construct a new wheel
haha yep!! the spokes were too rusty they all broke really easy. And the old hub needs a full internal service. But the rim was in perfect condition! thanks bro 👊
Bro I need a new rear rim u got any old ones u can ship
They're identic
There aren't front or rear rim
@@elelly1845 i think he's asking for a full rim not just the ring of the rim, otherwise there'd be no need to specify
@@Ferrari255GTO point is there is no rear rim, however there are rear hubs and rear wheels. proper terminology is important when dealing with wheels.
tire
rim
spokes
hub
all together make a wheel.
Now *THAT'S* "BeSpoke!" 😊
Waheyyy!! thats an aweosme comment bro! thanks so much 👊👊👊
My guy snapping those tire rods like it's nothing
Irony being when the wheel wasnt even straight
hahaha its ok it is now! 👊👊
Man this dude works fast !!! 🤔
Thank you broo!! 👊👊👊
Купить черное переднее колесо? Нет!
Разобрать заднее покрасить в черное и собрать его как переднее? Да!
Yes!! The G sport rim is very good rim with loads of life left in it… and we needed a nice front wheel. Mission at
No one can truly claim to be a Zen Master, until they've laced a wheel from scratch.
he attacked that wheel like it owed him money
🤣🤣🤣
😂
i honestly never knew you could do this. thanks for the education.
His patience is unmatched
Not a lot of people know how hard it is to respoke a wheel. Color me impressed😅 I threw out so many lightweight GT rims in my day because I had no idea how to do anything with them at all😅
Hahha niice!! yeah the old school rims were super weak they must have broken every weekend!! Glad you enjoyed the content, thanks for the comment!👊
@@T77BMX I had a set of 1987 gt gold rims (idk specifically) but as a 13 yr old I could lift the while GT with a pinky easy, most of it got stolen. Chopped right out of highschool but that ol GT took everything I gave it. Went thru dirt vert canal and street ramps. Ol girl took anything I could give it(unlike my hs gf 😆). Now I think about jumping on a bike I gotta let the ER know before I set out 🤣
Smokin that good stuff 😂
That spoke tune better be 💯😂
This takes me back to when I use to ride..
YES!! thats awesome bro thanks for the comment!! 👊👊
Sheeott, I thought you was going to make a basketball hoop.
Hahaha!! niiice man, thanks for the comment👊👊
@@T77BMX 👊👊
Yup. That's how it's done! Watch and learn!
You the man!! 🙌🫡
@@T77BMX check out the komatsu pc01 for building jumps. I want 1 so bad
He is a genius. He took the back Will off and put it on the front of the bike wow.
Thanks broo!! yes the Spokes were too rusty and the Hub needs full internal service. We re-used the rim because its in good condition! thanks bro 👊
You'd be surprised how few people can work on a bike
YES! thats so true bro 👊👊
Always detention, never cut spokes it can damage the hub flanges and the rim
YES! Very smart broooo. We did loosen these spokes first so tension was not too strong for when we cut the spokes!! thanks bro 👊👊👊
Reminds me of my childhood 💯💯💯💯 love it 😊
Wiiicked! Thanks for the comment dude we are glad you enjoyed it!
Trued that wheel like a champ
Thanks brooo! 👊👊
Crazy mechanic skills he’s done that 50xs at least it’s not easy at all
Thank you so much bro!! yes re spoking can be sooo hard sometimes! thanks for the comment broo 👊👊
Bro just reinvented the wheel
HAhaha thanks broo!! 👊👊👊
Not gonna lie, you had me in the first half😅
switched from water, to H20😂
I see the truing at the end haha😂😂🙌🏽
Haha!! Glad you liked it!
Looked like the right tools. Made easy work of it anyway.
Thank you so much bro!! Yes we almost had all the correct tools, It was just the Truing stand at the end to make the rim straight... 👊
You know what they say, one man’s skating ramp is another man’s garage. 😅
Putting all the spokes in on the same side of the hub is crazy
Сломал колесо, чтоб починить.)
Yes! The spokes and hub needed replacing ♻️
Now i want to hear a mash up of a track with the sound affects of this video
Hahaha no Way! that would be hella sick!!! 👊
Next time, don't clip the spokes in the first place.
Thanks bro! unfortunately the spokes were too old they were all rusted and broken!! so the nipples didnt work anymnore... We re-used the rim because its in good condition! 👊👊
Lacing wheels always pissed me off so bad lol
HAHAHA yeppp! its a pain in the A**! 🤣👊
This was a video of all time
Thanks brooo!!! 👊👊👊
He turned wheel to wheel. Amazing
F u, want a piece of me? Us riders stick together just like the local drug dealers yall became and now we war.
The patients of Kobe to do that all at the park lol I would have forgotten some tool that I need to complete it I’m sure😂
Hahaha! That’s so true bro I was really stressin that I would forget something 🤣🤣👊👊👊
You know that you could painted it the way it were without needing to cut the strings😅😅😅
Thanks for the comment bro! Unfortunely the old spokes were rusty they didnt spin on the nipples and they were breaking super easy!
@@T77BMX thanks for elucidating that my friend
A bike shop would’ve charged me $700 to do that.
God damn 😮
"Hey see that wheel?" "Yah!" I gonna destroy it and put on a similar one..ya know, like a smart people does!"
YES! Exacltly. Because the rear wheel was Broken so we used our brain to create new Wheel out of the Rim that was still working!
I love lacing and truing- I use to sit at my coffee table and build a set every night after work for local shop. They would pay me 50 dollars a set to build them. My garage had pallets with hubs, rims and spokes.. it was a fun side gig.. i miss that in my life
You're on the level if you're repairing stuff with the wrong tools.
Lol an so what the job was done perfectly
@@onelovejl8098 That was my point
Nice job homie😊❤
The people on this thread that don’t understand the skillllll it takes to true wheels with the right tools let alone none. This is impressive!
Mate no graffiti at the skate park 😂
🤣🤣🤣🤣 hahahaaa 👊
i remember the days piecing together bmx bikes out of spare parts from others and most the time only using wrong tools working with bare minimum
Haha yess!! thats what BMX is all about!!👊👊👊
before vs before😆
As a teenager with a spoke key, I had this power to fix or ruin wheels. I was a twat
Hahaha!!! niice. Yes very valuable skill to have down the skatepark!! 👊👊
Didn’t know that shorts can be that long 😂
Cheers dude!
Bro ain’t no way you finished that shii by eye.😂💯
Snapping sounded like perry the platypus theme😂
Hahaha someone else said that too!! hahahaha bringgs back some memories 👊👊👊
Покраска в дождь на улице. Genius 😂
I had no idea spokes on a bike rim could be replaced or adjusted. Cool
My dad taught me this 20 years ago... i thought the art was lost 😅
Thats awesome!!! thats very kind of your dad to teach you bro!! its not easy and a very cool skill to have 👊👊👊
The unemployed friend on a Wednesday afternoon lol
Your humor is top-notch.
Just buy the whole rim and tire 😂
Haha, Yes but then when the spokes come loose you will need to tighten them anyway! its a skill worth learning. Thanks for the comment bro! 👊
@@T77BMX True true 💪🏾
People that don't have too much money are the most creative.
YES! Thanks broo 👊👊
Started the video on the rear wheel then it miraculously turned into the front wheel
Yes! We recycled the Rim Into a new front wheel! So happy with how it came out 😎
@@T77BMX so you put a new back wheel on?
@@RussY0 He took the back wheel of a different bike, added a front hub + spokes on it, because he needed a new front wheel for his bike.
@@cloudsteele1989 I didn’t notice a different bike
@@cloudsteele1989 ah I see. Didn’t see that bit
Always wondered how they lace up the hub to a wheel
Awesome!! Thanks for the comment, We are glad we could show you something New!! 👊
mans got every angle 😂😂
Hahahaa my guy!! thanks bro 👊👊👊
Excelent job👍
Thank you so much!!
This is what your uncle who has 4 DUIs does during the day.
You Uncle.. Not mine 👊 haha
45 secs wasted 😂
Oh no!! sorry you didnt enjoy it bro.
Когда дохуя времени лишнего)
😅
You must really like your bike bro
Thank you so much broo!! 👊👊👊
This blew my mind, hella cool😅
Beautifully done sir