TTS 55 PRO | Assembly Video
Vložit
- čas přidán 9. 09. 2024
- Step 1: Install the frames
Step 2: Put the synchronous belt of the carriage on the synchronous wheel of the X-axis motor
Step 3: Fixed X-axis beam
Step 4: Tensioner Installation
(NOTE: Install the laser module at a vertical angle (90°)
Step 5: Install the bellows holder and fixed-length column holder
Step 6: Install the motherboard box
Step 7: Wiring
(NOTE: Incorrect connection between X-axis and Y1 motor line will lead to abnormal movement)
----------------------------------------------------------------------#twotrees
🚩 For more info or help please find
Tech or After-sales Support: service @twotrees3d.com or Whatsapp:+86 177 2282 7789
Members' Support: / twotr. .
For buying please directly go to TwoTree's official shop: www.twotrees3d...
-----------------------------------------------------------------------#laserengraver
#laserengraving #laser #laserengraved #lasercutting #co #lasercutter #lasermarking #lasermarker #lasercut #fiberlaser #custom #laserengrave #engraving #lasermark #cnc #diy #handmade #personalized #laserengravingmachine #laserco #woodworking #lasermarkingmachine #gifts #lasermachine #gcclaserpro #laseretched #lasercuttingmachine #cncwoodworking #gccworld
One of the best laser engravers, easy to use, with many expansions and accessories that make the job easier and more efficient.
Nice video and great to see TT has tweaked certain things but limit switches should now be standard
Thank you for your recognition and feedback. If you need any assistance, please do not hesitate to contact us.
Can't find the thing to tighten the laser module???
Mine was easy to put together but doesn’t work because one the wire lines are to short and stops it being able to move correctly
Dear, you can contact our after-sales engineers with any questions at service@twotrees3d.com.
Are the wiring configurations for the extension upgrade on the previous base model TTS 55 the same as the TTS 55 pro? Or are they not compatible?
Hello! My friend, please click on the link for more details: www.twotrees3dofficial.com/
Could you make a video on how to upgrade this machine with the 20W Laser Module? Are there any changes to make in the settings in LightBurn when upgrading to the 20W module? Thanks in advance!
I’m having trouble installing the laser part. It won’t slide down during that step. It’s like it doesn’t fit. Any tips?
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
@@Twotrees3Dofficial thank you, I just reached out to them.
Estou tendo dificuldade com a correia e o tençor, não sei como encaixou tão facil no video
I have just purchased one of these to use along side resin projects Where can I find the production lot number of the machine which I purchased as its saying on the website there is a Firmware update and not sure if I need to update it or not
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
здравствуйте не могу подключиться через wifi к лазеру с мобильного телефона
WiFi has two modes: STA and AP.
AP mode - the machine sends out a signal.
STA mode - the machine receives the signal.
When the machine is switched on, if the mobile phone can search the wifi name ‘DLC32+number’ or ‘laser+number’, the machine is in AP mode.
AP Mode - The machine is in AP mode.
AP Mode
Fixed password is 12345678
Fixed ip is 192.168.4.1.
STA Mode - This is done through the LaserGRBL software.
This is to be set up on the machine network via the LaserGRBL software.
The IP is assigned by the router or transmitting device and can be obtained from LaserGRBL.
Suggestion: use your mobile phone's wifi.
QAL a configuração correta para cortar MDF 3mm obrigada
Eu comprei uma Ts2 e o sensor antichamas não funcionou e eles não resolvem
Please send your details to email: luckyshay26@gmail.com She will help u.
Buenas tengo esta máquina pero estoy teniendo problemas para cortar madera de 1.5mm no se que parámetros hay que poner porque solo me hace grabado.
Alguien me puede ayudar estoy con Grbl
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
Which one is better, the tts 55 or tts 55 pro?thanx
pro
la machine découpe le delophane ou non ?