You got that "lil piece" in the right spot, it is thermal tape more or less, just to help stick and transfer the heat from that chip to the sync. Thanks for all ya do good sir !
The TBS Sixty9 (both Crsf and Tracer version) is 1W 20×20 and includes the control link. BQE RIP Squeak v2 many of us just got from the FPVCrate Sub250 box. But the ImpulseRC Apex Micro 3" has a 20×20 slot in the back as wel as the center. It's a sturdy, Stiff frame. 😁👍
Nick, the Rush Tank Mini is a 20x20 VTX and says its got a max output of 800mw but I've measured it to be closer to 900 when cooled properly. I'd say that's the most powerful 20x20 VTX you can get.
Have a look at the BQE RIP Squeak V2 because (a) the name is kinda cool and (b) you can get it for different prop sized and (c) you can get all sorts of TPU colours - get a mix to match your logo :)
If you haven't built a power whoop out of a Betafpv 95x frame then that's what I'd recommend. For mine, I kept it light like a shutterbug build but in the 95x frame with RCX 1304 5000kv motors and Gemfan 2540 props running 4s. It's quite fast and fun. However, if you want to build something with a 20x20 stack that is light and racer oriented then I suggest the Tomoquads Airstrike 3. On this frame I used RCX 1304 4000kv motors and Gemfan 3035 bullnose props. Quite light and powerful. Of course everything has ELRS on them now.
The 3” holybro kopis race frame is in stock at rdq. They seem durable and good quality so far. I have 2 with 20mm stacks & emax eco 1407 4100kv. Also there is a hglrc 20mm 800mw that is good and has a microphone.
These have THE best quality and durability I use for analog 5v clean signal almost as good as hd zero ,, even better than my rush tanks but no mic .. they only thing is the long press is 20 seconds to get out of pit mode on initial setup then you want all lights steady on is highest power simple I do not use tramp or smart audio in betaflight I setup all my vtx manually to highest power and leave it to many bugs in betaflight untrustworthy also the speedybee rhcp antenna is excellent combo with caddx baby ratel 2
Hi Nick YEP Great video and review of the speedybee vtx. I have been using the RUSH TANK mini 800mw vtx. But I am interested in the GEPRC vtx 30.5X30.5 for a build I have. Thanks again for emptying my wallet.
I was looking for a decent small vtx last night, but went with a bigger one and modified my 3d print. It's going on a wing. Guess I'll wait and see how all the reviews play out. Now that I'm thinking of it, i may just put a tbs 69 on it.
I have the RushFPV Tank Solo on my 2fiddy, also goes to 1.6w, has 20x20 mounting holes for a fan, but can also be mounted directly with short screws :)
Since it's been a while I would say build something of your choice. I wouldn't mind seeing it on the speedy bee V2 or something similar. Possibly even a 7" chimera. Endless possibilities really. Yep not being much help...🙄🙈 Thank you as always nice products!
There are other similar VTX out there. HGLRC has one, TBS has the sixty9. Good to see more options. Tmac rattle snake is an interesting micro frame 😉 but the Avanquad Avion3.5 frame is the one calling me.
Try the Rattler, a superlight 3 inch frame from T-Mac. It even takes hybrid configuration wit 3 inch props in the front and 4 in the back. Minimalist, but durable. I love it.
Thanks Nick, your videos have been invaluable. As a build idea, love to see a 3 inch 1s/2s similar to the recent nano hawk x but runcam split cam and express lrs receiver
HI i have a tight 3inch slim toothpick build where there isn't much space, I searched everywhere online and didn't found any data about the thickness of the vtx with the heatsink on it. Could you measure it ? Thanks
Anybody else use it one of these on Apex 4 inch frame? I've only flown it twice and curious if there's anything I should know before I quit the third time? I know it's not likely I'm going to get an answer before then... but yeah. As far as my bill goes after two flights on low-power it's working great.
Hi Nick always great vids! For your build how about an ELRS 5 in one FC in a whoop - youd get a long range tinywhoop?? I am planning a conversion of the UZ65 to the ELRS board as the standard VTX board fitment is poor (gets in the way of the camera and is stuck on with a pad) and I can ditch it.
I'm really interested in a gnarleyfpv subatomic frame build. That would fit into the micro category and hefty enough to build something with some power! What do ya think?!
@@NickBurnsFPV I love the 40mm prop size frames and quads. Maybe a remake of the firefly baby build? Same frame but lighter for 1s- 2s options? That would be super cool!
@@brianfreland9065 With 2s, we can spare a few additional grams, but that would be interesting to have a baby nazgul on 2s. I did suggest that to iflight. We shall see.
Really any camera that we prefer, but it does need to be an analog camera, like the runcam phoenix 2, foxeer toothless 2, or caddx ratel. There are many others, but I believe those to be considered the best offerings from each company.
I will be putting a batch of frames through CNC madness in the next week or so if you want to try a build? Optimo-3 v2.1 (previous versions on rotorbuilds) Over a year of fine tuning, now it’s fully refined 3” 3s450 AUW 95-101g depending on parts czcams.com/video/jE-EFbO3aUU/video.html
Also, it looks like Tomoquads said on his Facebook page that the Chopstick CSX 3" frame with tpu canopy. Can't tell if it will work for 20x20 stack or not.
@@NickBurnsFPV Good question. He posted this, "Guys i'm bringing back the 3" Chopstick CSX but with updated arm design." He responded to my question about 20x20 stack and said it will have 20x20 and 16x16.
![☀ Новинка для "динозавров". Аналог жив! [SpeedyBee Goggles Receiver]](http://i.ytimg.com/vi/d2ldsneCCKg/mqdefault.jpg)
![☀ Новинка для "динозавров". Аналог жив! [SpeedyBee Goggles Receiver]](/img/tr.png)
![☀ Видеопередатчик с радиатором, маленький, но мощный + ИТОГИ розыгрыша! [Speedybee TX800]](http://i.ytimg.com/vi/VgN6PPyqK-k/mqdefault.jpg)
You got that "lil piece" in the right spot, it is thermal tape more or less, just to help stick and transfer the heat from that chip to the sync. Thanks for all ya do good sir !
was going to post the same thing, you beat me to it! thermal pad to transfer heat, glad you didn't lose it, Nick!
@@thegrafxguy1 me too! Haha
Can't wait to see what you put it on, and vtx range test when finished!
it will be nice if you gonna try the new frame from Chris Rosser it's called AOS 3.5
Yes @Nick Burns, this one !
It's a nice frame. I prefer the 5", but the 3.5" I built is a blast. It's called the Cicada. aka AOS 3.5
The TBS Sixty9 (both Crsf and Tracer version) is 1W 20×20 and includes the control link. BQE RIP Squeak v2 many of us just got from the FPVCrate Sub250 box. But the ImpulseRC Apex Micro 3" has a 20×20 slot in the back as wel as the center. It's a sturdy, Stiff frame. 😁👍
Nick, the Rush Tank Mini is a 20x20 VTX and says its got a max output of 800mw but I've measured it to be closer to 900 when cooled properly. I'd say that's the most powerful 20x20 VTX you can get.
What's the image quality of the tank mini like in your experience? Image quality is what has pushed me towards TBS VTXs
Alfarc cubaio 88mm looks like a good contender for the tx800.
Uruav too got few new frames i.e. force tb65/75 or ur25 hd.
This 👆
Have a look at the BQE RIP Squeak V2 because (a) the name is kinda cool and (b) you can get it for different prop sized and (c) you can get all sorts of TPU colours - get a mix to match your logo :)
If you haven't built a power whoop out of a Betafpv 95x frame then that's what I'd recommend. For mine, I kept it light like a shutterbug build but in the 95x frame with RCX 1304 5000kv motors and Gemfan 2540 props running 4s. It's quite fast and fun.
However, if you want to build something with a 20x20 stack that is light and racer oriented then I suggest the Tomoquads Airstrike 3. On this frame I used RCX 1304 4000kv motors and Gemfan 3035 bullnose props. Quite light and powerful.
Of course everything has ELRS on them now.
BQE Rip squeak I have 2 that is all I fly these days it come from 2-3” thanks for the review would love to see it hooked up and quality of the signal
Pretty nice looking VTXs, Nick! Great review! 😃
Looking forward to see what you do with them!
Stay safe there with your family! 🖖😊
Thanks Nick, you rock buddy!!
I really appreciate all your efforts. Thanks.
It is important, that piece you flic is a thermal pad, to help to transfer the heat to the metal cover to work as a dissipator
hahah I used that diamond thermal paste for my computers instead ,, works way better
That little square you flicked off was a piece of heat transferring tape/pad.
The 3” holybro kopis race frame is in stock at rdq. They seem durable and good quality so far. I have 2 with 20mm stacks & emax eco 1407 4100kv. Also there is a hglrc 20mm 800mw that is good and has a microphone.
I'd love to see you build an AOS 3.5. I know it's bigger than your usual but this vtx would be perfect for it.
These have THE best quality and durability I use for analog 5v clean signal almost as good as hd zero ,, even better than my rush tanks but no mic .. they only thing is the long press is 20 seconds to get out of pit mode on initial setup then you want all lights steady on is highest power simple I do not use tramp or smart audio in betaflight I setup all my vtx manually to highest power and leave it to many bugs in betaflight untrustworthy also the speedybee rhcp antenna is excellent combo with caddx baby ratel 2
BQE Rip Squeak V2!!!! 3” arms?
Hi Nick you should try the AOS 3.5 looks a really cool frame, with unusual shape
Hi Nick YEP Great video and review of the speedybee vtx. I have been using the RUSH TANK mini 800mw vtx. But I am interested in the GEPRC vtx 30.5X30.5 for a build I have. Thanks again for emptying my wallet.
price on this is right too, very tempted to pick one up for if I ever actually go long range...
Probably my next purchase for a 4 inch freestyle. Don’t have an 800 mw. It’s purdy too. Lol
I was looking for a decent small vtx last night, but went with a bigger one and modified my 3d print. It's going on a wing. Guess I'll wait and see how all the reviews play out. Now that I'm thinking of it, i may just put a tbs 69 on it.
I have the RushFPV Tank Solo on my 2fiddy, also goes to 1.6w, has 20x20 mounting holes for a fan, but can also be mounted directly with short screws :)
Since it's been a while I would say build something of your choice. I wouldn't mind seeing it on the speedy bee V2 or something similar. Possibly even a 7" chimera. Endless possibilities really. Yep not being much help...🙄🙈 Thank you as always nice products!
Hi. I put my t-lite on edge tx. Took about 20 minutes. No more test warning and ELRS works at 500.
Nice. I am still running the opentx nightly on mine :)
I got a new frame deadcat 65mm prop with any setup needed.
Is it on the website?
There are other similar VTX out there. HGLRC has one, TBS has the sixty9. Good to see more options.
Tmac rattle snake is an interesting micro frame 😉 but the Avanquad Avion3.5 frame is the one calling me.
Thank you, I’ve been looking for a good whoop vtx.
Nice gear mate. Speedy bee make some nice fpv gear! 👍🍷
The flywoo Goku is 850mw it's 30×30 20×20 and 25×25 I just ordered one for my 3"
Nice little vtx. The antennas look cool too
BQE Rip Squeak V2!
Try the Rattler, a superlight 3 inch frame from T-Mac. It even takes hybrid configuration wit 3 inch props in the front and 4 in the back. Minimalist, but durable. I love it.
Thanks Nick, your videos have been invaluable. As a build idea, love to see a 3 inch 1s/2s similar to the recent nano hawk x but runcam split cam and express lrs receiver
The "Bone" as seen on Rotor Riot
BQE - Rip Squeak
nick my son is a fan of your indoor flying yay ...
Tell him hello from me :)
HI i have a tight 3inch slim toothpick build where there isn't much space, I searched everywhere online and didn't found any data about the thickness of the vtx with the heatsink on it. Could you measure it ?
Thanks
Sorry, I can't. It ended up burning up and went in the trash. my estimate would be 4mm.
Tomo quads gots as new 3 inch frame kit I just picked it up you should check it out.
3” BQE Rip Squeak is phenomenal with BH 1504.5 motors!
Anybody else use it one of these on Apex 4 inch frame?
I've only flown it twice and curious if there's anything I should know before I quit the third time?
I know it's not likely I'm going to get an answer before then... but yeah.
As far as my bill goes after two flights on low-power it's working great.
Hi Nick always great vids!
For your build how about an ELRS 5 in one FC in a whoop - youd get a long range tinywhoop??
I am planning a conversion of the UZ65 to the ELRS board as the standard VTX board fitment is poor (gets in the way of the camera and is stuck on with a pad) and I can ditch it.
I'm really interested in a gnarleyfpv subatomic frame build. That would fit into the micro category and hefty enough to build something with some power! What do ya think?!
Do you mean this one czcams.com/video/Cnaf83GNnq8/video.html
@@NickBurnsFPV haha yep! I didnt even see this vid! One step ahead of me, as always! Haha
@@NickBurnsFPV I love the 40mm prop size frames and quads. Maybe a remake of the firefly baby build? Same frame but lighter for 1s- 2s options? That would be super cool!
2s, 1102 10,000-13000kv, 40mm prop or bigger on the firefly baby frame? I think that would be killer if it was light enough for 2s!
@@brianfreland9065 With 2s, we can spare a few additional grams, but that would be interesting to have a baby nazgul on 2s. I did suggest that to iflight. We shall see.
You never mentioned if there switchable?????
Power switchable? I do think I mentioned that, which is pretty standard these days.
AOS 3.5 please and thanks for the great content
Maybe on a tiny hawk freestyle 2 with this and elrs.
mounting would be an issue with that unusual shaped board.
The AOS 3.5 frame by Chris Rosser at CNCDrones looks like a beauty of a frame. Would love to see a build of that frame.
Does the GepRC have thermal protection. I'd hate to plug in and burnout before the goggles are down.
I am not sure. I would need to look further into it.
What camera should I use with this?
Really any camera that we prefer, but it does need to be an analog camera, like the runcam phoenix 2, foxeer toothless 2, or caddx ratel. There are many others, but I believe those to be considered the best offerings from each company.
Maybe some CatalystMachineWorks frame
3" freestyle quad
also good for 5 inch?
Sure if the frame has the mounting for it.
Can I replace it on my eachine cvatar the cvatar has a f7 fc
If it fits yes.
carnage/venom sub 250 3.5in
Beebrain brushless v3 new board? 🤔
not for this but I do have that
I will be putting a batch of frames through CNC madness in the next week or so if you want to try a build?
Optimo-3 v2.1 (previous versions on rotorbuilds)
Over a year of fine tuning, now it’s fully refined
3” 3s450 AUW 95-101g depending on parts
czcams.com/video/jE-EFbO3aUU/video.html
buy a gecko frame and make up a 3.5" with the motors I have on mine it is a rocket. :-D
Also, it looks like Tomoquads said on his Facebook page that the Chopstick CSX 3" frame with tpu canopy. Can't tell if it will work for 20x20 stack or not.
Did he update it? I had/have the original
@@NickBurnsFPV Good question. He posted this, "Guys i'm bringing back the 3" Chopstick CSX but with updated arm design." He responded to my question about 20x20 stack and said it will have 20x20 and 16x16.
ARMMATTAN TADPOLE HD
If I'd make a new 3" build it'd be a micro apex :)
another vote in for the AOS 3.5!
Tks dead bat
Build an Acrobrat