I was struggling a lot with throttle config on the honeycomb bravo and although this vid it is not referring to it, you still provided great knowledge and helped me solving the config issue. Thanks to you my flight experience improved a lot so I am really appreciated for your effort to create and share these vids. You are a legend.
Thank you sir. Seems a whole lot easier than actually trying to pull the throttle back and I also noticed if I calibrate it with reverse , i still move at idle so the only way to not move is by parking brake. I hope this fixes that. And I’m a moron because I’m realizing now I’ve spent three days wondering why I haven’t been able to go straight especially on runways. I had calibrated only one side so my engines where going at different rates even tho it was locking my throttle to the correct position. I also had been using double throttle for stuff like Cessna which apparently causes issues as well
when i click my button to go to reversers, and then bring it back all the way forward it only brings the reversers to 50% power on the engine page even though the throttle shows it is at full reverse
Hi, I have some issues w/ my Hotas X, it does not move @ all. + I do not see in EFb that page for calibration. How do you get to it>>? What exactly have u prreesed? Ty, great vid.
Can you guide me how to calibrate an xbox controller for the throttle? Whatever I do, I am not able to get the flight to CL mode. It always goes into TOGA.
Finally you did the impossible. You found a way to fix the throttle. Thank you.
Lol Thanks George for watching. Im glad this helped you out :)
I was here for 2 hours trying to fix it, saw every video online, yours was the only one helpful, thank you very much!
Glad it helped you out Bruno
Man, you have the most helpful videos. Thank you
Thank you man! These comments make my day :)
Fixed my problem I have been trying to sort for 2 days I can hopefully make my first full MSFS flight now. Thank you brother :)
I am glad this video is heling out so many people :)
OMG!! Thank you so much I looked for 2 months for an solution you just saved my flight sim experience!!! THANK YOU
WOW! I have looked everywhere for this. Thank you so much. Your's is the only video that actually fixed my issue. Thanks again.
Glad it helped Brooks 🙂🙂
Great vid man! I was about to give up on the reverse thrust, but you covered it right at the end! Sweet!!!
I don't know how to thank you this video is amazing and helped me out so much. Thank you!!!!
You already did by leaving a kind comment 🙂 Glad it helped you out!!
You my friend, are a legend. Thank you!
Haha no man! Glad it helped...Thanks for the support on the channel 🙂
So glad I found your channel. I can now operate that throttle properly.
Bro just saved my life 💀💯🙏
Thanks a lot man
Wow this was a HUGE help! Now my throttle works perfectly for the Airbus!! Thank you!!
I was struggling a lot with throttle config on the honeycomb bravo and although this vid it is not referring to it, you still provided great knowledge and helped me solving the config issue.
Thanks to you my flight experience improved a lot so I am really appreciated for your effort to create and share these vids.
You are a legend.
Glad it helped Mike. Thanks for the comment
Mike, any chance you could elaborate on the fix for the Bravo? I've tried using the instructions on FBW and I can't get reverse to work.
THANKS SO MUCH ive been needing to fix this finally can!!
glad it helped :) Thanks for watching and commenting!
Lifesaver! Thanks!
Thank you very much my friend, a big hug for you from Brazil, I was already giving up.
Haha Luiz Thank you for the supportive comment man!! Glad this helped you out :) Have a great week bud!
Thank you sir. Seems a whole lot easier than actually trying to pull the throttle back and I also noticed if I calibrate it with reverse , i still move at idle so the only way to not move is by parking brake. I hope this fixes that. And I’m a moron because I’m realizing now I’ve spent three days wondering why I haven’t been able to go straight especially on runways. I had calibrated only one side so my engines where going at different rates even tho it was locking my throttle to the correct position. I also had been using double throttle for stuff like Cessna which apparently causes issues as well
Glad it helps 🙂 Thanks for the support on the video!
thank you it was all about disabling the reverser on axis
INCREDIBLE VIDEO, love this community of flight sim
Great video, spent 2 days trying to find out what happened to my throttles
Glad it helped you out Xman! :)
Thanks very good and clear instructions
Glad it helped Tissa :) Thanks for watching!
This was helpful! cheers! happy flying! 🛫
Glad it helped Scrapy! Have a good day :)
Thank you so much, friend!
@@razorsharpshark Glad it helped. Thanks for supporting the channel
ty very very much for your hepl ! very appreciable tuto ! (i have the same flight x hotas) 🙂
Legend, thank you so much for this man, earned yourself a deserved sub!
Most helpful Indeed!
Thanks for watching and commenting 🙂🙂
Thanks for the video, helpful and clear
Glad it helped Adrian. Thanks for watching and commenting
Thanks you really helped me
Hello Sir. Do I ever appreiate you for your great teaching vidieos? YES !!! 😉
Thanks Abby 😁😁 Means a lot!!
Thank you for your help!
No worries Diego! Thanks for stopping by :) have a good weekend!
Really helpful vid mate, tysm!
Glad it helped you out mate! Have a good weekend :)
Excellent video thanks 👍
Thanks man
Thank you!
Thank you, thank you, thank you, great video clearly explained.
Glad it helped you man :) These kind of comments make it worth uploading the videos :) Thank you!
Thank you for tuttorial
Thanks for watching aan 🙌
THANK YOU
Thank you so much.
Welcome! Have fun 🤝
Thank you for the very helpful video.
Thanks for watching John. Glad it helped you out :)
thank you so much!
welcome Jona. Thanks for watching :)
Thank you for help
Happy that it helped 👍💪 Thanks a lot for watching and commenting :)
Man thank you sooooo mucht it help me out so thank you
Glad it helped man :) Have a great day!!
thanks a lot!
Glad it helped :)
Thank you very much bro!
My pleasure :)
Thankyouu same thing i had with my thingy thankyou amazing
Welcome Ahsan! Glad it helped!
When i do the calibration throttle within the cockpit moves along with my controller. But plane satus on full throttle no matter i do
You should do throttle tuning when the aircraft is cold and dark with just batteries and fmc on or gpu connected
Ur the best man
Yo haha Thanks for watching mate!!
Thanks 😊
You're welcome man!
when i click my button to go to reversers, and then bring it back all the way forward it only brings the reversers to 50% power on the engine page even though the throttle shows it is at full reverse
Never seen this happen on mine. I'll look into it when I start the sim today. What hardware are you on for throttle?
Thanks great video. Is this the dev build or experimental?
Hey, this is the experimental build :) Thanks mate!! Hope you have a good weekend!
thx bro
You're welcome man!
I can't save it because it says Flex (0.90) overlaps with TOGA (0.95) How I fix this
Take your throttle to 75 percent for flex and 100 percent for toga and then save each of those positions seperately
@@AirborneGeek I have the Thrustmaster tca thorttle and it has own presets
Can you answer my question it's okay if you don't know
Nope, this is all I know to be honest. Not sure about the tca throttle
@@AirborneGeek I got it I watched another tutorial!
Well i can't drive the plane right or left on the runway tho :/ How can i fix that?
Pmdg options, simulation, go to last page and select rudder and nose wheel on the axis
@@AirborneGeek Thank you Homie :)
I need help for the rudder because rudder keeps Wiggling even though I'm not touching it can you please help me with this problem
This should be a null zone issue. Just increase your null zones to 5 percent and that will help. If inputs are beyond that, try 6-7 percent
Hi, I have some issues w/ my Hotas X, it does not move @ all. + I do not see in EFb that page for calibration. How do you get to it>>? What exactly have u prreesed? Ty, great vid.
It should be in efb settings page now with the newest update
Is this throttle page on the standard install of the aircraft I seem to be missing throttle and nose wheel pages under the standard install
This is the experimental version
My idle position on my thrust master throttle is shown as climb in my cockpit how do I fix this?
You should follow the exact steps as shown in this video. That should help
Mine is inverted,i dont know why but full power is zero,zero power is full,idk how it managed to dp that
Sorry, did you figure this out on the latest update?
How can i set up speed break?
Through the controls page on msfs. I have it set to the "/" key on my keyboard but you can set it to anything.
What about XBOX controller??
I do not have an xbox controller or xbox so I am not sure about that Abdul
Can you guide me how to calibrate an xbox controller for the throttle? Whatever I do, I am not able to get the flight to CL mode. It always goes into TOGA.
Exactly. Same problem here(
Sorry never used controller so not aware about that part. Hope you find the solution
Doesn’t work for me
Does it work now on the latest update
Pls guide me with the help of keyboards
Sorry never used keyboard for throttle