great video my friend, I congratulate you, the oil that falls when you take out the transmission cannon is refilled or remains like that, and in case of refilling, how is it filled, thanks
Hi mate did you replace the gearstick plastic bush when you put it back in? My shifter has a heap of slop when in gear, thinking the bush might be worn. Thoughts?
Please I would like your help. There is the gear lever of my mitsubishi pajero manual gearbox which shakes a lot on takeoff. It also shakes when I slow down to stop for example. Often also It goes out while I am driving normally 80km/h. The mechanic checked the oil in the gearbox, it was missing, we added oil but the problem persists. He also checked the fuel injector pump but still the problem. Finally he told me that I have to change the clutch disc. Need your opinions please
I have a shake when the Pajero is in gear but the brake is pressed. Please tell me this is just the mount or something. Doesn't shake when in neutral or park
is it okay if I will only resurface the pressure plate instead of buying new one? And do I need to resurface the flywheel everytime that I will put new clutch components?
If your pressure plate is OEM, I recommend you to just buy a new pressure plate unless your current pressure plate is high performance one which is costly to replace, then just resurface it. but i did come across some forum that mentioning, if you resurface or remove some material like 0.2mm on the surface of your pressure plate, then you also need to remove 0.2mm at the bolt/contact surface with the flywheel, if not, you will lose some clamping force with the clutch when you install it. This is what I read on that forum, but i never done that. you should ask other people opinion or your mechanic or your local machine shop about it. You don't need to resurface your flywheel everytime you change your clutch. You only need to resurface your flywheel if the runout is out of specification ( surface not flat ), if im not mistaken for this car the runout for the flywheel is 0.3mm. so you need to resurface the flywheel if the runout is more than 0.3mm. you can get the reading using dial gauge. or just bring it to the machine shop to check it for you.
I'm not 100% sure if this is correct, but based on my knowledge, it seems like a ground wire, since this transmission have some electrical wiring to it.
sir magandang araw po ano kayang sera ng pajero ko 4m40 matic mahirapang tomakbo kahit apakan mo accilerator pidal at hinde na rin gumana ang rom ko at speedo metter ko
napakaraming bagay o aspeto o bahagi ang dapat isaalang-alang sa problema ng iyong sasakyan, pasensya na hindi ako makakapagbigay ng solusyon para sa iyo. maaari kang magtanong sa isang taong may higit na kaalaman kaysa sa akin. at sorry sa late reply
Я не уверен на 100%, что это правильно, но, насколько мне известно, это похоже на провод заземления, так как к этой передаче подключена какая-то электрическая проводка.
رحم الله عبدا عمل عملا صالح فأتقنه
الحمد لله شكرا اخي
Golden! Thanks so much!
mantap boss ku 👍🏻
Great Video! What size of jack stands are you using?
Hardwork
great video my friend, I congratulate you, the oil that falls when you take out the transmission cannon is refilled or remains like that, and in case of refilling, how is it filled, thanks
Excellent. thanks you for this video.
Good work
Excellent video my friend. Editing and information were fantastic
thanks, im glad if this video does help you
hi did take the wiring harness of before you started undo the plugs ?
Damn .. such a gruelling work, I can feel the ribs, abs shoulders paining
Hahaha. I had cramps in my legs while doing this. and my neck is hurting so much. but what can I do, had to do it with what I have at the moment.
@@adambmhabuildyou're a legend. Take care of yourself Sir, love and respect from 🇮🇳
You didn't show the trick for separating the gearbox from the clutch!
This is the most powerful manual transmission of pajero with the final gear ratio 4.875 and SS4-1！
I use 35”tires over 260000km……bad ass!
What's the name of these gear box?. I need a 3rd gear for mines
@@fightschoolsageART v5m31 5speed manual
Hi mate did you replace the gearstick plastic bush when you put it back in? My shifter has a heap of slop when in gear, thinking the bush might be worn. Thoughts?
yep.most definitely
we used to use a piece of garden hose instead lol
Please I would like your help. There is the gear lever of my mitsubishi pajero manual gearbox which shakes a lot on takeoff. It also shakes when I slow down to stop for example. Often also It goes out while I am driving normally 80km/h.
The mechanic checked the oil in the gearbox, it was missing, we added oil but the problem persists. He also checked the fuel injector pump but still the problem.
Finally he told me that I have to change the clutch disc. Need your opinions please
I see only 2 of the flywheel bolts got washers.whats the purpose of that washers
👍👍
👍👍👍👍
I have a shake when the Pajero is in gear but the brake is pressed.
Please tell me this is just the mount or something. Doesn't shake when in neutral or park
Good vide, I wish it only took 8 minute to do this job
He started working in the morning and finished the prescription in the middle of the night but it worked fine
is it okay if I will only resurface the pressure plate instead of buying new one? And do I need to resurface the flywheel everytime that I will put new clutch components?
If your pressure plate is OEM, I recommend you to just buy a new pressure plate unless your current pressure plate is high performance one which is costly to replace, then just resurface it. but i did come across some forum that mentioning, if you resurface or remove some material like 0.2mm on the surface of your pressure plate, then you also need to remove 0.2mm at the bolt/contact surface with the flywheel, if not, you will lose some clamping force with the clutch when you install it. This is what I read on that forum, but i never done that. you should ask other people opinion or your mechanic or your local machine shop about it.
You don't need to resurface your flywheel everytime you change your clutch. You only need to resurface your flywheel if the runout is out of specification ( surface not flat ), if im not mistaken for this car the runout for the flywheel is 0.3mm. so you need to resurface the flywheel if the runout is more than 0.3mm. you can get the reading using dial gauge. or just bring it to the machine shop to check it for you.
Good
😃👍👍👍👍
🇧🇷👏🏻👏🏻👏🏻🤝🏻👍🏻
How many hours of work are there?
👍🖖 show
Anyone know if this clutch kit is the same as the PD8W L400 Delica 2.8 4m40t
7:26 what is this wire? A ground for something?
I'm not 100% sure if this is correct, but based on my knowledge, it seems like a ground wire, since this transmission have some electrical wiring to it.
Bhi jan jo gear oil apne wast kia ha wo to daal do
sir magandang araw po ano kayang sera ng pajero ko 4m40 matic mahirapang tomakbo kahit apakan mo accilerator pidal at hinde na rin gumana ang rom ko at speedo metter ko
napakaraming bagay o aspeto o bahagi ang dapat isaalang-alang sa problema ng iyong sasakyan, pasensya na hindi ako makakapagbigay ng solusyon para sa iyo. maaari kang magtanong sa isang taong may higit na kaalaman kaysa sa akin. at sorry sa late reply
Что за провод на 3:0 ?
Я не уверен на 100%, что это правильно, но, насколько мне известно, это похоже на провод заземления, так как к этой передаче подключена какая-то электрическая проводка.
How many hours
This job can be done within a day with slow working pace.
Bruno