T5 has 2x RCA pass through. So connect with whatever (jack, 2x RCA) > 2x RCA cable from analog source to sub RCA input. Then connect 2x RCA > 2x RCA cable from sub RCA output to speakers 2x RCA input. If connected to computer I would use separate subwoofer output from soundcard and crossover enabled in settings to remove bass from the speakers and leave it to be handled by subwoofer. It improves sound quality as speakers are not suffocated by trying to reproduce very low frequencies.
@@JulioJairdeAlba If you have only one 3.5mm output from computer (I assume) then multichannel USB soundcard is probably the best option. Then you can set Bass Management in sound card settings or use Equalizer APO/Peace to set EQ separately for the speakers and subwoofer (including high pass and low pass filters accordingly). But I think that removing bass from MR4 is not really necessary if you're not planning to play it very loud because there won't be any significant distortion. Just set the subwoofer crossover around 80hz and you should be good. You might also turn the bass knob down few decibels on the speakers. After many tests, including measurements, I ended up setting High Pass Filter on MR4 at 60Hz, which is quite low.
The sub has got stereo RCA Signal In and stereo RCA Signal Out ports. You connect your sound source to the T5 subwoofer's Signal In ports using a 2xRCA(subwoofer) 2xRCA/1xmini-jack cable (included in the box with the T5) and then you connect the 2xRCA Signal Out ports to the Line In RCA ports on the MR4s.
Thank you so much for the reply but honestly. im really new to this and have no clue what you just said. Maybe, If you can make a quick video, that would really help. I know there's a lot of people who are looking for a video like this. I've tried going through reddit, google and other sites on the net and no one seems to have explained this properly @@jegermajster
9 out of 10 people ask if you can make a video (how to plug in the mr4 and the t5) so please mate...make the video, we are all waiting for it! but more importantly, how did you set the knobs on the t5 + mr4? 1 x Volume Dual (Min - Max) 1 x LPF (30 - 160 HZ) 1 x Phase (0 - 180) please bro make a video where you show all this!
Please just show the back how it’s connected. Thank you
T5 has 2x RCA pass through. So connect with whatever (jack, 2x RCA) > 2x RCA cable from analog source to sub RCA input. Then connect 2x RCA > 2x RCA cable from sub RCA output to speakers 2x RCA input. If connected to computer I would use separate subwoofer output from soundcard and crossover enabled in settings to remove bass from the speakers and leave it to be handled by subwoofer. It improves sound quality as speakers are not suffocated by trying to reproduce very low frequencies.
MR4 is quite tricky to set up, u need sub/amp that have L R out
@@BastyTHz You just need proper cable. Every stereo output is LR, including 3.5mm outputs in computer soundcard or phone.
@@michwoz How can I remove the bass from the speakers, currently I have only a 3.5mm output. Do you have a audio device recommendation to do that?
@@JulioJairdeAlba If you have only one 3.5mm output from computer (I assume) then multichannel USB soundcard is probably the best option. Then you can set Bass Management in sound card settings or use Equalizer APO/Peace to set EQ separately for the speakers and subwoofer (including high pass and low pass filters accordingly).
But I think that removing bass from MR4 is not really necessary if you're not planning to play it very loud because there won't be any significant distortion. Just set the subwoofer crossover around 80hz and you should be good. You might also turn the bass knob down few decibels on the speakers. After many tests, including measurements, I ended up setting High Pass Filter on MR4 at 60Hz, which is quite low.
Please upload a video how did you connect it please 🙏
edifier t5 have rca out, you can connect rca out from t5 to mr4
Speaker to Sub Output and your listening device to sub input
Can you show a video how you connected all these to the sub?
The sub has got stereo RCA Signal In and stereo RCA Signal Out ports.
You connect your sound source to the T5 subwoofer's Signal In ports using a 2xRCA(subwoofer) 2xRCA/1xmini-jack cable (included in the box with the T5) and then you connect the 2xRCA Signal Out ports to the Line In RCA ports on the MR4s.
Thank you so much for the reply but honestly. im really new to this and have no clue what you just said. Maybe, If you can make a quick video, that would really help. I know there's a lot of people who are looking for a video like this. I've tried going through reddit, google and other sites on the net and no one seems to have explained this properly
@@jegermajster
@family.id01czcams.com/video/KV3Ex8orz_c/video.htmlsi=k-RgJRD6Nrdb9JCp
So basically its Sound source > T5 > MR4?
@@andrenikolai1061 i really don't know i wish he would upload a video how to connect it. or anyone for that matter
Will the audio input from the aux port of the MR4 work with the T5 sub?
介绍的很详细😉,漫步者的MR4音质出众,我也买了一台,并且拆开它看了看内部结构,具体可以看看我的拆解视频😋,算是补充吧
how is bass from mr4 and t5 sub compared to boombox 3?
How did you connect the sub if they don't have sub output?
You can see the answer to @sinlokemp where @michwoz explain it.
Name Song?
Shape of you bass booster
How to connect?
Via double RCAs on T5.
Mình có đôi loa krk 5 gen 4 có gắn đc con sub này ko vậy bác
Berapa harganya.......om
con sub T5 đó có kết nối được boombox 3 ko b
ko đc bn ơi
9 out of 10 people ask if you can make a video (how to plug in the mr4 and the t5)
so please mate...make the video, we are all waiting for it!
but more importantly, how did you set the knobs on the t5 + mr4?
1 x Volume Dual (Min - Max)
1 x LPF (30 - 160 HZ)
1 x Phase (0 - 180)
please bro make a video where you show all this!
Sao cứ cảm giác loa nghe chán nhỉ