M-Vave Chocolate Wireless MIDI Controller | Unboxing and iPad Quick-test
Vložit
- čas přidán 25. 08. 2024
- This is an unboxing and quick-test video of the M-Vave Chocolate Wireless (Bluetooth) MIDI Controller.
Wanting to purchase the M-Vave Chocolate Bluetooth MIDI Foot Controller? It will help support this channel with no extra cost to you if you use the link below:
s.lazada.com.p...
Other gears used in this video:
iPad running CubeSuite and PositiveGrid Bias FX2 apps
IK Multimedia iRig 2 Mobile Guitar Interface
Laney AH40 Amplifier
Fernando Strat Guitar
Cada vez mais o futuro é esse. Um pedal genérico para mudar os efeitos plugado em um iPad.
I totally agree!
I hope it's possible
I really do not want to spend 50 extra bucks but if not that would be great, what I'm saying is, do you need the i rig cause if i do that would suck. Please let me know
Yes youll need irig/interface to input and output your guitar to your ipad/pc to the amp/headphone.
But to control the effects on your ipad/pc with the footswitch it can connect wirelessly.
@Tusksvr, yes you will need the iRig or any other audio interface for your audio input and output.
Thanks buddy
How do you change the bank without getting one of the 2 footswitch values you pressed as well? Im struggling with that. It changes the bank but it sends the value of one of the switches after that. Thanks great video!
Can you use the Footswitch while the battery is charging plugged at the usb port?
Yes, you can operate the footswitch while charging through its USB-C port. You may connect the USB cable to a powerbank, so you can still be mobile. Thanks for asking.
Crees que funcione con Ampkit Link de Peavey y con Jamup de Positive grid? / Do you think it would work with Ampkit Link / Peavey and Jamup / Positive grid
Thank you for your comment. I think it will work with any iOS music apps that can accept bluetooth MIDI and have MIDI Learn feature, regardless of which audio interface you are using, such as M-Audio, Scarlett, or Peavey Ampkit Link.
And for garage band, it works?
@yaheleltrabajadordeintel6240, thanks for asking. It can only control the volume, since Garageband lacks MIDI Learn. However, you can control the AUV3 instruments that you use inside Garageband, as long as these AUV3 instruments have MIDI Learn function.
will it work in Boss Katana 50Mk2 and iOS?
@charlesmagno28, thank you for your comment. I don't have the Katana amp. If your set up is just to connect your audio output from iOS device to your Katana amp, and then control your iOS device with the M-Vave Chocolate, then it would work. Hope this helps.
sir, gumagana po ba ito sa spark positive grid ios app at fl mobile sa ipad?looking to use for stomp pedal control and sample playback sa fl e.salamat
Hi. It seems walang MIDI learn function sa Spark app. Na map ko sya sa mga button controls in FL Studio mobile, pero I can’t find a way to map it sa Play button.
Hi, great video. I was just wondering if you could set up a looper pedal of sorts using the bias app with the m-vave chocolate
Yeah, this is exactly my question too.
Hi @ahronabatayo8363, thanks for your comment. The Bias FX2 app has a built in looper with Record, Play, Undo, and Clear controls. You can assign these to the live view buttons, then use MIDI learn to assign these buttons to each of the 4 M-vave Chocolate footswitches. Hope this helps.
@@bmarr9589, thanks for your comment. The Bias FX2 app has a built in looper with Record, Play, Undo, and Clear controls. You can assign these to the live view buttons, then use MIDI learn to assign these buttons to each of the 4 M-vave Chocolate footswitches. Hope this helps.
I went with Loopy Pro and things started to get really interesting!!
Funciona com android e o amplitube?
@RitualAge8, Obrigado pelo seu comentário. Desculpe, eu não tenho um dispositivo Android, então eu não fui capaz de testá-lo.
Any delays or lag?
@bidikei7854, not noticeable. It's quick in triggering effects and sound changes on the iPad app.
Hi po .. need po ba ng 3rd party app para sa Bluetooth connection ng ipad to midi controller?
@nerdhelvillacampa9765, thank you sa question nyo. May sariling (dedicated) na app ang Chocolate MIDI controller para sa bluetooth connection (M-vave Cube Suite, downloadable sa M-VAVE website or appstore.)
Pede po ba pag sabaying na e on ang A & B?
@annepaloma6915, pwedeng ma configure ang A at B to control different parameters, so you can separately switch them both to ON, both OFF, or ON/OFF separately. Kung apakan mo ng sabay both A & B switches, it will trigger the virtual "E" switch. Same din pag sabay apakan ang C & D, the virtual "F" switch will trigger. Hope I answered your question. Please let me know if you need clarifications.
Good video, can you help me please? I have an iPad Air and the chocolate, but I can't get it to work, can you explain step by step how you connected the controller to your iPad, I already configured the chocolate with my phone but when I connect it to my iPad it doesn't do anything, it doesn't work
@classandrey5273, thank you for your comment. If you were able to connect it to your iPhone, it is quite the same connecting to your iPad. Try unpairing it and forgetting the Chocolate on your iPhone, then try pairing it with your iPad. I had a similar problem, when the Chocolate footswitch is on the list of Bluetooth devices on my iPhone, my iPad 6th Gen cannot detect it. I had to "forget the device" on my phone. This problem went away, though, after several OS updates. hope this helps.
was this as easy to use as it seems? cool presets
@jaimis5377, thanks for asking. It is easy to set up and pair with the iPad.
can it be done with moer Ge100?
@DonnieGguitar, unfortunately, MOOER GE100 has no MIDI functionality, so you cannot control the iPad apps using the GE100, nor controlling the GE100 with the MVAVA Chocolate footswitch. Anyways, thank you for asking.
@@musikanikenoh wait I have irig and iPad can it with GE?
Also can you use multiple pedals at once
@Tusksvr, thanks for asking. Yes, you can. Just pair them all to your device.
Hi there, I've an old iPad with a looper app (Quantiloop). The ios is old for the app that is used to set up the footswitch. Is the app needed? If so, can I use my android phone to set up the footdwitch? Thank uou
@magzn, thank you for your question. The CubeSuite app is needed to connect the iPad to the footswitch via bluetooth, and to configure the MIDI assignments to the switches. CubeSuite has an Android version, so technically it will work on your Android phone. You may download it from www.cuvave.com/appdownload. Hope this helps.
Is it possible to connect 2 Midi controllers via bluetooth? I use one on my iPad with Bias fx 2, I wanted to connect another one
@PabloSilva-nz1su, thank you for your question. Technically, you can. Make sure that the 2 footswitches are paired with your iPad in bluetooth Settings. Both controllers should appear in the Equipment List of your CubeSuite app. Hope this helps.
me gustaría saber si es que este pedal puede funcionar para controlar los presets de la aplicacion del Toneroom de vox en el Ipad
@EsAhora, thank you for your question. I may be wrong, but I cannot find a "MIDI Learn" function in the Vox Tone Room app, so I cannot control the presets.
Hi,
Can i know if a wireless adapter is needed or not to connect to a pc wirelessly
@donjanithu, thank you for your question. Does your PC has built in bluetooth adaptor? If so, you don't need external adaptor or dongle to connect. Otherwise, you should purchase a bluetooth adaptor card or USB dongle to connect your PC to the Chocolate footswitch. Hope this helps.
Were you able to use just one bank and turn on/off individual FXs? What about expression pedals plugged in the back?
Thanks for your comment. In this video, I switched to different banks by stepping on footswitches C & D at the same time (bank up) or footswitches A & B simultaneously (bank down). I'll test this with an expression pedal once I get one.
Hi, @jonathassantos8463, by setting up CubeSuite to control CC's, you can toggle the individual effect on/off in one bank. I recently got an expression pedal and it works on this footswitch.
@@musikanikenhi can you show the setup to on/off individual effect?
do you know any android application I can use instead of the one your using? I don't use any iOS device
Hi, @dreidoodles2321, you may try Deplike app.
Hola amigo muchas gracias por el video, quisiera saber si me podrías decir algún pedal de expresión que sea compatible con ese modelo, ya que me estoy por comprar el mismo que tenes pero también me gustaría comprar un pedal de expresión!
Thank you for your comment. I am also looking for a compatible expression pedal. 😅 I will let you know if I get one.
How can you connect between m vave and PC by not using Bluetooth but use jack line instead in case the distance is far from the pc. By the way how long the distance that the signal is ok for using. Thanks for your answer.
@Ice_Passawee, you can connect the USB Type-C port of the M-Vave to your PC using a USB type-C to type-A cable. With regards to bluetooth distance, I get disconnected in just 6 feet when using my laptop, but it's quite far when using my iPad...probably 20 meters or more.
@@musikaniken Thank you so much☺️
@@Ice_Passawee Thank your for your comment!
Hi guys
My 5 M-Vave chocolate devices are on “custom keyboard mode” through Cube Suite app. However, once I want to change them into “custom control” mode for my different needs I can do that via Cube Suite however when I close the M-Vave Devices the changes were not saved at all. And devices still re-opened in “custom keyboard mode”. Is there any way to fix that problem reset M-Vave devices etc.? I really need to use them in custom control mode.
Many thanks
Cem
@mehmetcemsolak4580, thanks for your comment. Have you tried updating your Cub Suite app? Normally, the app would open in the mode it was on when you closed it. So if you open the Cube Suite app, set it mode to Custom control, close the app, the next time you open it, it will be in Custom control mode. Did I answer your question?
@@musikaniken unfortunaley not did that several times still when I shut down and reopen device it returns to custom keyboard mode (it should have been custom control mode)
Can we use through usb in computer as well?
@007Videoz, thank you for your question. Yes, you can connect this through the USB port of your computer.
Thus this work with irig1?
@JonasMendoza-nw6dt, yes.
pwede po ba yung imbes sa amp i connect e direct na sa mobile for video/audio recording?
@jaysonguzman4484 thank you for your comment. Pwede po derecho nang i-record sa mobile device ang audio output, pero need mo DAW like Garageband or n-Track Studio para marecord mo ang audio from Bias FX. Hope this helps.
Do you know if this will work with positive grid spark go?
I Was thinking the same. He's using Bias so I think it may work. I have positive grid RIFF and I think it may work with it as well. I am gonna get one. they are cheap on Amazon
@@kaywoodparsons5307 I got it and it will not work. I spoke to Positive Grid and they are no longer allowing third party devices.
Just connect with the phone and everything work .do i have to set up first??
Nice! Have the CubeSuite detect the pedal via bluetooth, choose from the different control configurations, then you are good to go and control the music apps (that have MIDI learn feature) on your phone.
@@musikaniken what app are you using
@@youidontaaa I'm using Bias FX 2 (www.positivegrid.com/bias-fx-mobile/)
whats the app used in the ipad?
@stockSOHC, I'm using the CubeSuite for the bluetooth connection and the PositiveGrid BiasFX2 app for the pedal/amp effects.
mine is not pairing anymore after a supposed firmware update.... any ideas?
Let me know if you can still connect it using the included wire/cable.
@@KJAsumen it doesn't work. Dead paperweight
Good day boss. Pwede ba sa pc? DAW and stand alone plugin kasi gamit ko.
Hi, Robert John. Gumagana po sa PC using wired connection (gamit ang USB-C cable from the pedal to PC). Nade-detect sya ng laptap ko as bluetooth device pero di ko sya ma-connect wirelessly. BandLab (online) ang ginamit kong DAW. Mako-control naman ang mga buttons after ma MIDI map mo sila sa chocolate footswitch.
thats a cool song, whats that song called please? 2:30
@thaian4573, Thanks for asking. It's the first line of the Christian song, "Seek Ye First the Kingdom of God" (Matthew 6:33).
Sir, gagana po ba ito sa guitar rig app sa pc?
@CookieAguilar, I don't have Guitar Rig, pero sa tingin ko gagana naman po kung merong MIDI Learn function ang Guitar Rig software mo. In my case, nagagamit ko ang M-Vave with my laptop running a guitar pedal/amp simulator na included sa Mainstage. Hope this helps.
Hello sir ask ko lang po binili nyo po ba yung positivegrid na gamit nyo?
Thank you for your comment, @rickbagtas4520. Opo, binili ko po ang Bias FX2 sa appstore.
Pwedeng malamang sir kung magkano mo sya nabili? Balak ko kasi mag ganyang set up! TIA
@@rickbagtas4520 yung Footswitch nabili ko around ₱1300. Ang Bias FX2 Elite package around ₱1200 ata.
can this be used for tone bridge app?
Same question
Hi @adikaramaulana1184, @nastynotes2174, Tonebridge currently has no MIDI mapping feature so you can't control it with this footswitch. A workaround may be to load Tonebridge to one channel strip of Audiobus or AUM, then set up your MIDI mapping in Audiobus/AUM.
Yes this works with the tone bridge app.
Onde comprar e quanto Custa?
Thank you for your comment. I bought it online from Lazada…not sure if this marketplace is available on your location.
Anong app yan sa ipad?
PositiveGrid Bias FX2 po.
boss? quick test ba? di mo na inopen cuibesuit app?
Hello. Inopen ko ang CubeSuite app. Kelangan ang app para maselect mo ang MIDi mapping option for the iPad app na ko-control-in mo. Di ko lang naipakita sa video ang CubeSuite app setup.
@@musikaniken Pano po gamitin or mag edit ng mapping? di ko kasi magets eh yung advanced custom settings.
pati yung Manufacturer mode ata yun?
sa BiasFx2 mobile, (manufacturer mode) isang apak ko sa midi controller nag turn on yung isang effect pero kailangan i hold ko apak ko para manitili yung effect panu ayusin sir?
@@marlbororeds8922 Thank you for asking. Sa CubeSuite, pwede mo gamitin ang Custom Control instead of Manufacturer’s Control. Assign ka ng different MIDI CC numbers sa bawat foot switch. Tapos sa BiasFX, tap mo ang Live View, then create Scene for each of the 5 buttons (currently labeled Empty kung wala pang Scene) by tap and hold the Button and select Scene sa menu na mag appear. This will toggle on and off ang mga pedals na ginawa mo sa Scene. Finally, MIDI Learn mo ang bawat scene button sa BiasFx by tap and hold the button, select MIDI Learn, then step on the foot switch. Hope this helps.
@@musikaniken Nahanap ko na boss, nakukulangan parin ako sa Midi controller na ito hehe kailangan ko pa ng isa, Pag dalawa sana kasi eh yung 1st na midi controller pere ata na gawin pang switch banks, yung secong pede ata na pang toggle on and off lng sa mga pedals or effects sa bawat banks dba?
Mas ideal setup yan yung 2 foot controllers.