I just did the installation of these lights. If you are using the quick connectors like in the video, I recommend shaving off a part of the coating on the wire where the quick connectors clamp onto them. I tried just putting the wire in it without doing that, and the little blades in the quick connectors didn't puncture through the coating and touch the wires inside, so the halos and bottom lights didn't work.
great video man.... it saves me lots of time,,, installing my new headlights with halos,, thank you much,,,, one thing bro don't use quik connectors,, it will fail in few weeks,, i just peel wires,, weld it,, and tape it good,, work much better,,,, anyways,, god video,,,
I have an issue. I have a 2009 Scion TC, and my low beam connector does NOT fit into the socket. The connector is too small, and that's because my low beam is a H11, and not a 9006 connection. They're basically switched. I'm guessing because I have a 2009 scion?
You could have used a less noisy place to do your demo. like at your house. lol You dont need more expensive connectors. Standard butt connectors will work just fine. You cut a wire and strip both ends and put them on one side of the connector and any other wires you want to join that circuit on the other side then crimp them both. You could have used a 3" extension to make it easier to hold the racket while removing the bolts. By the way, if you're going to make these videos stop saying "pretty much" it sounds ridiculous. You either do or you dont. Good job!
Thanks for suggestion, this is our old (2013) video. Please check out our recent installation videos and give us more feedback so we can keep improving our videos, thank you.
Feels like a let down that u didn’t show the complete look with both of them on their and turned on
I replaced both headlights on my daughters Appreciate your video!!
I just did the installation of these lights. If you are using the quick connectors like in the video, I recommend shaving off a part of the coating on the wire where the quick connectors clamp onto them. I tried just putting the wire in it without doing that, and the little blades in the quick connectors didn't puncture through the coating and touch the wires inside, so the halos and bottom lights didn't work.
Always check all functions before tidying everything up.
@@spyderauto I got mad and ripped mine out. Now i don't know where all the wires go. 😂😫
Thank you for the vid, and detailed walk through of what and where the bolts are to remove the Headlight assemblies.
I have different lights but i spliced the led’s and halos into my running lights. I highly recommend it!
Thank you for the video and I'll definitely be changing my own headlight assembly.
Thanks for the video, i replaced mine with ease after watching this. Nice job
Did the same way as u did but didn’t use those quick connectors, I just splice them in to the running light
this vídeo help me a lot!! nice video!!
*Thanks Bro it helps me a lot* 👍👌 greetings
Bought on Amazon is it supposed to be missing a T10 194 bulb? Only have 3 of 4 T10 bulbs on both headlamps
great video man.... it saves me lots of time,,, installing my new headlights with halos,, thank you much,,,, one thing bro don't use quik connectors,, it will fail in few weeks,, i just peel wires,, weld it,, and tape it good,, work much better,,,, anyways,, god video,,,
For some reason I have a gap now between the headlight and bumper. Any advice ?
You can give our tech support line a call for some assistance. They may ask you to send some pictures.
Hi is there any way to replace the small bulbs that are aligned in the inferior part of the headlight?
That evo tho..
Lol I thought the same thing
Can one put LEDs in those headlights???
I have an issue. I have a 2009 Scion TC, and my low beam connector does NOT fit into the socket. The connector is too small, and that's because my low beam is a H11, and not a 9006 connection. They're basically switched. I'm guessing because I have a 2009 scion?
For me My low beam lights/ headlights are the H1 bulb?
Why is this only for 2005-2007 isn't a 2008-2010 the same
would be nice if you showed us the lights
kawaiisrs07 you can look this video czcams.com/video/LCuBej9oiEA/video.html
they are almost identical
I own this headlight, I guess the last owner didn't take care of it really good so I'm replacing it with factory lights
Does anyone know what size bulb are the little led lights
Those should be the standard T10 wedge type bulbs.
Dude i cannot get that grey plug to unplug no matter how hard i press 😩
I even used pliers and can't get it to unplug
For any issues or questions about your Spyder product, reach out to our tech support team techsupport@spyderauto.com
😳😳
You could have used a less noisy place to do your demo. like at your house. lol
You dont need more expensive connectors. Standard butt connectors will work just fine. You cut a wire and strip both ends and put them on one side of the connector and any other wires you want to join that circuit on the other side then crimp them both. You could have used a 3" extension to make it easier to hold the racket while removing the bolts.
By the way, if you're going to make these videos stop saying "pretty much" it sounds ridiculous. You either do or you dont.
Good job!
Thanks for suggestion, this is our old (2013) video. Please check out our recent installation videos and give us more feedback so we can keep improving our videos, thank you.