Faux (fake Roman Shade (An easy project) Part 2
Vložit
- čas přidán 25. 08. 2024
- This is part 2 of how to make a faux Roman Shade. Many of our customers are turning to cordless cellular shades for safety and privacy and installing faux roman shades in front of them for a custom softer look!
Please visit my Amazon store for Roman shade supplies!
www.amazon.com...
Very easy to understand! Professionally done!
Thank you so much!
Thank you! I enjoyed watching and can’t wait to get started on my faux Roman shades.
Thank you so much for this tutorial. I made two shades for my kitchen and they turned out great!
Thank you Scott I'm going to try these shades...
Just want to say thanks; I got mine all finished and put up. It's an inside mount, and it looks great.
Hi Lexi, did you follow his measurements for the rings. Mine doesn't seem to be lining up right.
Thank you for this informative video. I really enjoyed watching. I am going to start my project this week. I didn't see how you attached the board to the wall once the faux Roman shade was finished.
A trick : you can watch movies at kaldroStream. Me and my gf have been using it for watching a lot of movies these days.
@Bo Rene Yup, I have been watching on Flixzone} for months myself :D
Good video but I did not see any portion that talked about the size of fabric that was used to cover the board(Not the side ears), but the other fabric . Also, how do you mount the shade?
Would like to see a close up of the rings.
How do you outside mount the board once faux Roman shade is completed? Thank you
Thank you so much for all you do. I think of you as “the voice of reason”. You simplify every application that I’m looking for.
Thank you Janice!
Awesome video, enjoy them
Two questions after watching
1. I do not see an answer about how to mount??
2. I did not hear anything telling me the dimensions of piece to cut to wrap the board??
I would really appreciate these pieces of info. Thanks
I too didn’t see how u covered the board
Like others I am hoping you have a quick minute to let us know how your customers install the board for an ouside mount. Does it screw directly into the wall/ceiling or do you use a bracket of some kind? Thank you for the great tutorial!
You use an L bracket to mount them to the wall.
Thank you so much for sharing your expertise about window treatments! I wanted to make a donation, but wasn't sure if Laser Installations is the correct payee. Please let me know.
this was a great tutorial and very professional . I would like to know what style bracket do you attached the faux roman shade to above the window. I could not tell based the angle of the video, I so love it to be attached wider than the window frame because I will have mini blinds mounted inside the window frame. Does the shade attached directly on on the window frame or what?
Thanks!
How do you hang these?
I am confused by the third piece of fabric on the board at the end in addition to the shade and the wings. Thank you for this tutorial!
Hi Mary! You do not have to have the side flaps that wrap around the edges of the board! These faux Roman shades are being mounted outside the window frame and the flaps help hide the mounting hardware. Thanks, Scott
I don't understand how you are clipping all the rings on each row. It looks like you use the split rings on the bottom row of rings only, then you bring up row by row and I don't know what you are doing to keep clipping each row.
Hi! yes I’m using a split ring and clipping all the rings together!
@@Factorydirectdesignersworkroom Okay, I found a close-up photo on Rowley Co of what that looks like, so now I understand. Thanks.
Thank you for the informative video. What is the best way to mount the wood bar at the top to the wall?
The shade rings, how did you snap the jump rings thereto? Video did not show detail how you stitched them with crochet. Thanks
if putting these over a sliding glass door - how long should it be and how much of the top window is it covering? Or does this not lend itself to a sliding glass door. Thanks
How many inches are used to staple the fabric to the board at the top? I want to be sure the primary part of my pattern repeat is in the middle of the top section of the curtain.
Ok I hope you can answer this question. I’ve followed you step by step but wanted my finished a little longer. Is it ok to only have 2 folds (3rows of rings) I’m looking at it and I think I want more header showing. Will it look weird?
I'm confused by the measurements for the rings. You have 4" then 6 1/2" then 5" then 5." In trying this, it seems like my last two folds are even rather than staggered. Should the last measurement be 3 1/2?
Yes the last 2 are 5” and 5” and when you hang it you will see it does stagger do to the weight.
If I want my shade to be 10inch in total length what measurements should I use for where to place the rings?
I have on hand a high tenacity cotton cord thread that is 1/2 lb, look to be 1mm thick, wondering whether I can use that instead of #10 crochet. Or a #8 perle cotton thread?
I live in the UK, where can I buy the plastic split rings and what size are the split rings.
I want to try this with a curtain panel that I bought should be OK right? Also would like to shade to come past the middle of the window that a problem?
Hi Scott. I followed the video but then realized my friend wanted the shade to have a 1” reveal at the bottom, then two 3 inch reveals (folds) with a total length of 22”. I can’t for the life of me figure out my ring placement to make this happen. Please help! Thanks so much!
How did you come up with the numbers 4, 6 1/2, 5 and 5?
This formula has worked best to keep the folds even, basically trial and error!
Were do get clips for gathering up rings
30:09
Thank you. How do you actually mount it?
Loved your video! Do you attach the shade to the wall with L brackets?
Where can the split rings be purchased?
Joann fabrics
Scott, thank you so much for this 2 part video. I'm working on same following your well thought out presentation. My valance is longer...46" cut length. I'd like my folds to be a little wider, about 1 1/2" ea (a scale thing), but my attempts to do so haven't worked. I did a mock of your measurements for the ring and folds placement, and see they end up close together when pulled up with the clip ring. Are your measurements the key to making it work? I've seen images on line of wider folds like mine but now wondering if perhaps they are sewn. I appreciate any comments you have.
Doris: Did you ever figure out the measurement/placement of the rings for a deeper fold? Or did you end up sewing the folds in place to achieve the desired effect?
@@ginarozenski9233 I figured it out and they turned out beautiful! It took a while as it was more challenging than I expected but I’m glad I stuck with it. I didn’t want the look of sewing them down. Thanks for asking!
@@dorisrichardson2688 would you be willing to share your measurements! I too want deeper folds. Thanks!
what do you do when the fabric is 60" wide and the shade needs to measure 79".
Barbara, I've had this situation before. In fact, I ran into this situation just this week with a very geometric fabric. I ended up buying enough fabric to use the length of fabric rather than the width. If you can't do this way (I think it's called "railroading"), then buy enough fabric to use one 60" width for a centered section (call that section "A"), and then split another 60" width into 2 sections (Sections "B" and "C"). Then sew one split section "B" onto the left end of center section "A", and the other split section "C" onto the right end of center section "A." Then you can cut down the total width for your 79" window treatment. Personally, I prefer a balanced look when splicing sections together. If 79" is your finished width, then I would make the center section A to be 55" finished width, and the two outer sections "B" and "C" to each be 12" wide finished. Thus, 55+12+12=79". If you use the entire 60" width for your center section A, then each of your side sections will be narrower than I would personally want. Maybe draw it out to scale first to see what you prefer. Good luck!
Good question! What we do is seam match (if print fabric) 1/2 width on each side of the full width and then we trim off the excess evenly on both ends. For example 9-1/2”/60”/9-1/2”= 69”. of course you need to add for seam allowances and side hems. You will need to do the same with the lining and center the seams to the shade fabric the best you can since the lining is going to be narrower in width. Good luck!
Is there a way to do this that doesn't involve staples, so it is easier to clean?
You could sew in a pocket at the top, and mount it using a tension rod. However I'm not sure about laundering with all the rings. Might work on a gentle cycle.
I made one a long time ago and I added velcro to the board and hemmed top of the shade
Sew Velcro on the fabric side on top edge. ( that will attach the lining at same time) Fold velcro portion back and attach to a board with Velcro stapled along the very top edge of board. My board screwed on to wall. Not much return on mine, depends what you like. This way can come down for cleaning.