How to adjust the reference for Y1 and Y2 on the Press Brake Machine FAQ [Selmach Machinery]
Vložit
- čas přidán 8. 09. 2024
- selmach.com/kn...
Watch our experienced engineer demonstrate how to reference Y1 and Y2 on a press brake.
First, you need to test your settings on Y1 so we recommend taking a piece of material; we have chosen to use a test piece that is 1.2mm for this demonstration. Program the thickness into the machine. Then program the angle to 180 degrees and the bending time to about 6 seconds and press run.
To continue reading: selmach.com/kn...
Call us on 01432 346577 to get more information.