Plumbing a camper van! Brian's worst idea ever... | Promaster build series
Vložit
- čas přidán 10. 09. 2024
- Our tiny home on wheels is getting closer to being completed! More plumbing and woodwork for Brian in this video.
📸 Follow us on Instagram for behind the scenes content! @Life.on.the.Blacktop
Instagram- / life.on.the.blacktop
Facebook- / lifeontheblacktop
Get your own Life on the Blacktop merchandise right here!
life-on-the-bl...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vlogging Gear used in our videos
(Some of these are affiliate links and will help support this channel with a small commission at no additional cost to you.)
--------------------------------------------------------------------------------------
Canon M50 amzn.to/2MNWBp4
Vlogging Lens amzn.to/3PDNoMm
B-roll Lens- Sigma 16mm amzn.to/2PS4TPR
GoPro Hero 10 amzn.to/3IXDRO4
---------------------
Accessories
Rode dead cat amzn.to/2zBSuUm
Switchpod Vlogging tripod amzn.to/2PRw5hD
K&F Concept ND Filter amzn.to/3uMmEyH
PolarPro Brass Step-Up Ring (55-67mm) for ND filter onto vlogging lens www.bhphotovid...
As an Amazon Associate I earn from qualifying purchases.
Hang in there Grasshopper Lol , the wait will be worth it in the end . You are doing great I think it is going to be amazing when you get it done and then you can say we done this and be proud of what you accomplished. Warmer days are coming🙂
I’m starting to feel your stress & anxiety Brian. Keep grinding bud. It be done on time.
Keep on going, you two will have the most satisfaction out of it when it’s all done. You will look back and say we did this. Can’t wait for the final product it’s going to be so cool.👍🏻
Trim the vent. It doesn't need to rotate. Set it in a fixed position.
Unfortunately it does need to rotate. I trimmed the lid and it went well, gonna have to do the same with the floor but you shouldn't see it when it's done. I hope haha
It will all be worth it. My Dad was “ that’s good enough “didn’t work with him. 5th grade education but he could do most anything Smartest man I ever knew.
Looking forward to the finished van. Keep on keeping on.
I totally get where you're at- you've got over analysis paralysis or FOMO. You just want to make sure you are thinking everything out and placing everything in just the right places so you don't have regrets about the placement later. Stick with it! It is turning out really good and you know you are gonna love traveling in it when it's done. just think about relaxing outside the van at Sturgis later this year. It looks really great, and makes me want to get a van too!
Brian...let me give you some feel better info- you guys arent alone...my wife and I have been building a tiny shed/cabin for 7 years, yes thats right ....7 YEARS and we STILL arent finished! So I FEEL your pain....I have personally built 2 homes over my life( hired 70% of the labor) and they were WAY easier than this small off the cuff cabin! AS with you guys...there are MANY learning curves and designs/redesigns for almost the entire build ESPECIALLY the solar and electrical plus plumbing! BUT...the biggest culprit of it all was the room to work!!!! SMALL = PAIN, FRUSTRATION AND TIME!!!! Of course money did play into it as well....built out of pocket so limited on the cash each year and that hindered as well....BUT when you are done, and you will be one day....chalk it up to an ADVENTURE!!!! lol.....keep going you WILL WIN!!!! And the laughs will be with you guys forever...the pains will fade....at least most of them...LOL...Steve
My thought was also to trim off the top of the vent instead of trying to notch the underside of your flooring. Brian, dude you need a carpenter, but then again it is not the same satisfaction as doing it yourself. This is getting to be more of a "what NOT to do" video. I do admire your determination.
Unfortunately the vent needs to spin to direct the airflow. I was able to kind of chisel out the lid and I'll do the same to the flooring probably. I'll update this weekend probably.
Brian! Hang in there!! You're doing amazing and each video comes with great progress! Looking forward to seeing the final results!
It's definitely starting to come together. Every project has its own "ugh, I have to do this before I can do that" scenario. It's starting to get warm here so I'm hoping to use my new AC soon 😎
Great job on the van build. And you have to take time off every now and then. Can't wait to see the finished product. Ride Safe
Shoot some brad nails into the last piece you showed with the glue and tape. And Also I would consider putting a small piece of rubber between your aluminum framing and your water tanks because once you fill the tank it's going to expand and be rubbing on the aluminum framing. Other than that you're doing a fine job
Hey man! Your doing great! Love how you want your finished product right! Remember Rome wasn't built in a day. Your on your way to everything being just right!👍
Brain your perseverance is outstanding 👏👏 Keep pushing on mate
You got this, Brian.
I know you will get it done just keep up the good work
I don't mean anything negative by this but the last minute of this video had me thinking of a movie. It was called The Shining 🤣. Hang in there brother. God Bless
Looking good buddy be safe out there your buddy from Oxford
you're not stupid you only make some things harder than it should be, keep going buddy, almost done, great work 😎
Looking good brian, keep going...cheers
Your pain is our entrainment 😅. Keep pushing. The van is looking good.
For your 5/8 id hose , could you not use automotive heater hose? Flexible and rated for heat in case the relief pops.
Looking good 👍🏼
While you are at it mine as well put in a wheel chair lift because by the time you finish it you are going to need it... 😂 Just busting your 🏀🏀
So much geometry 😵💫
I’m not sure how much more of this van build I can handle!
You and me both!
@@LifeontheBlacktop😂
I love how Brian has given himself a date to finish.......and then didn't share the date 😂. A pin nailer would have made life a lot easier to hold that mitre while the glue was drying. kinda surprised you're using titebond II instead III, the III also sets up a bit quicker in colder temps.
Yeah that date has come and gone lol. New one set though! I went out and bought a brad nailer and a finish nailer after this. I don't have many wood tools and don't really want to buy some but the rest of my cabinet work is gonna need em. I used 2 on this cuz it sets up quicker. Mostly I've been using 3 for the water resistance. Welp, back to work so I don't miss another deadline lol.
I have faith in you and your doing a great job keep it up 🤘
your doing just fine bro, and you could of stood the 45 piece on edge after you glued it and put a strap around it to hold till dried
Use another piece of tape to hold that miter together.
Hahaha as soon as I seen where you drilled the holes I thought I bet those are going to be too close to his framing. Bummer.....
Brian, at least you are honest about it lol. Day 6 thousand working on the van. lol
You can do it
😎👍
👍👍👍
16:57 😮 You know😅
Cross drill it or peg it
keep going!!
I’m not a carpenter but I have learned that there really isn’t a wrong way to carpenter stuff
You do know that you can sand the plastic on the vent to make that flush on the top and bottom
I could, but then I wouldn'tbe able to spin it to direct airflow different ways
Damnit Brian.(response to the title)Tiny town reminds me of a Blackberry Smoke song
Wouldn’t it been easier to Just buy a small motorhone
Probably but then I'd be stuck with an ugly motor home that cost more than I've got into this. Catch 22 lol
13:51 😷😷😎🤣🤘🏻🇺🇸
She muted part of that cuz I was running my mouth inappropriately lmao
@@LifeontheBlacktop that is hilarious 😂🤣🤘🏻🍻
Plus❤✌🏻😎🫵🏻👍🏻
No way dumb ideas?
For your 5/8 id hose , could you not use automotive heater hose? Flexible and rated for heat in case the relief pops.
I was thinking the same thing.
Ultimately I decided I wanted it to be potable in case I over filled the tank and water got up into the hose.