Video není dostupné.
Omlouváme se.

24v Victron RV Solar System on Paradigm Alliance 5th Wheel Part 1

Sdílet
Vložit
  • čas přidán 26. 04. 2024
  • we install 2x Victron Multiplus Inverters in parallel , an 800ah battery bank and all the components to make this the perfect system for our customer.
    Part 2 • Alliance Paradigm Vict...
    sotasolar.com

Komentáře • 50

  • @tedhamilton2362
    @tedhamilton2362 Před 2 měsíci +2

    Shawn, glad to see you are putting your 'Himmelberger Bus' experience to use in a business! Looking forward to the learning!

    • @sotasolar
      @sotasolar  Před 2 měsíci

      Certainly learned many things the hard way. Glad to have you aboard!

  • @samfish6938
    @samfish6938 Před 2 měsíci +2

    you explain it better than 90% of the other youtube videos

  • @rs1961
    @rs1961 Před 3 měsíci +3

    That battery box you built is beautiful craftsmanship!
    I love your videos … I learn so much!
    Thank you for posting these videos.
    Can’t wait for part 2.

  • @bradkiefer777
    @bradkiefer777 Před 15 dny

    Excellent job. Love this layout

  • @OmahaWayne
    @OmahaWayne Před 3 měsíci +3

    GREAT VIDEO !!!!! Thank you sir.
    BTW One of those vent caps on the roof of the Paradigm (I think the black one) is just for solar install, it runs from the roof the the belly storage area just for running solar pv wires :)

    • @ChrisBairKeto
      @ChrisBairKeto Před 3 měsíci

      Came here to say this!

    • @sotasolar
      @sotasolar  Před 3 měsíci

      I will have to investigate that i’ve passed the point of no return on this specific install, but I saw another vent tube coming up from the black tank that was headed towards that direction. My instinct says it’s still a black tank, but I would like to believe that you’re correct because that would make things simpler in the future. Thank you for the comment.
      Just thinking more there already is existing solar board on the roof. The only reason for having another channel would be satellite or something or something, but typically those are under a different kind of cover, but then again every RV manufacturer might do things different.

    • @OmahaWayne
      @OmahaWayne Před 3 měsíci +1

      @@sotasolar It's the reason it's black verses the two white ones :) It's one of the 100 customer driven features of an alliance rv, you can see it in their pdf at their home page.
      I know you are done with this one but all Alliance rv's have it, if you look in the belly it will be a black pvc pipe coming down from the ceiling going nowhere :) Just in case you do another Alliance product.
      Love the channel and have subbed for a long time, thanks for all the help you have given me.
      PS: Love all the dog content as well. Bear and Zuki are so cute. Please go into his story a little more sometime :)

    • @ChrisBairKeto
      @ChrisBairKeto Před 3 měsíci

      @sotasolar at 2:55 in the center of the frame you'll see a black pipe that just ends. That's the pre-run pipe just for roof stuff. I'm really enjoying your channel, lots of great ideas here.

    • @murp0443
      @murp0443 Před 3 měsíci

      Great job.

  • @daviscrt
    @daviscrt Před 3 měsíci +1

    Nice video. Maybe you should think about getting a new or usef forklift instead of a truck. A lot cheaper. Probably work better in the shop. Thanks Don

    • @sotasolar
      @sotasolar  Před 2 měsíci

      Not a bad idea, taking delivery of some items would be easier. But with the truck I can plow the pavement as well. I’m watching auctions for both.

    • @davidduckworth8229
      @davidduckworth8229 Před 2 měsíci

      Skid Steer with trailer mover, snow bucket, forks, snow blower etc. The attachments at limitless.

  • @2hotscottpro
    @2hotscottpro Před 3 měsíci +1

    Shoulda put yer surf board arms out telling how windy it is n still going lol

  • @pdxagogo
    @pdxagogo Před 3 měsíci +2

    Great video my friend! So cool to see you're using that Dihool breaker switch. I just discovered those around Christmas and love them as well also the mini din rail setup and box. I have started using the mini din rail breakers as well. They come in AC and DC. Great job on your setup and I agree on paralleling the Victron Multis.
    I've gone to 48 volt systems now whenever i can. So much easier to work with. Let me know if you want info on 48 colt step down converters, it took me forever to find a good source that had higher current output. Thanks again!

    • @sotasolar
      @sotasolar  Před 3 měsíci

      Biggest issue with 48 is no 2x120 on the multi, that I’m aware of. Yes please share your favorite 48v step down converter!

    • @pdxagogo
      @pdxagogo Před 3 měsíci

      Daygreen is the company. I love Victron but have started doing less typical(in RVs) 48 volt, off-grid systems as well. If you're curious about my experiences let me know and I'll contact you through your business website.

    • @sotasolar
      @sotasolar  Před 3 měsíci

      @pdxagogo please do

    • @2hotscottpro
      @2hotscottpro Před 3 měsíci

      Don’t stop there let’s hear it ?

    • @pdxagogo
      @pdxagogo Před 2 měsíci +1

      @@2hotscottpro I use Rich Solar and EG4 systems. They are typically the LV6548s and the EG4 6000 EX all in ones. The Chargeverter enables you to utilize power form 15/20/30 amp sources as well. Really powerful systems but the interfaces are definitely not in the same league as Victron.
      One that is in the same league is EcoFlow and the Power Kits along with the Delta Pro Ultras are really compelling as well.

  • @daved888
    @daved888 Před 3 měsíci +2

    The black vent is the solar channel, I have a 2023 340 and mine terminates in the basement.

    • @sotasolar
      @sotasolar  Před 3 měsíci

      Huh…. Well don’t I feel silly now.

  • @dalehollenbaugh6084
    @dalehollenbaugh6084 Před 2 měsíci

    Could you talk more about limitations of input current for dual inverters? So dual 3000 2x120V are limited to 19A min. If you have 15A input, would you not run in parallel? How does that work and what are the downsides? Could you run two non-2x120 regular inverters (even say 5000VA) in a split phase system. Would these double in the input current limit, or would you be able to run at 10A (3000VA) or 14A (5000VA)? If you run split phase, would you ALWAYS? need to give it split phase power, even for those 15A/30A circuits? This would require autotransformer on the input. How hard is it to reconfigure system to work with split phase vs parallel? Is it a simple button in CerboGX control panel or do you have to dig into software and reconfigure?

  • @lxe1986
    @lxe1986 Před měsícem +1

    Hello, I have a question about the breaker that you installed after Victron Energy Lynx Power In. I’m just asking, does it make a different if batteries cables go to the top or bottom of this type of breaker?

    • @sotasolar
      @sotasolar  Před měsícem

      Not that I’m aware because power flows both ways and must protect both ways.

  • @dadesigns4u
    @dadesigns4u Před 3 měsíci

    Mustachio!

    • @sotasolar
      @sotasolar  Před 3 měsíci

      We’re not turtle enough.

  • @SunsetSlimess
    @SunsetSlimess Před 3 měsíci

    Love the channel! What happened to your DIY batteries? Too busy doing installs to build them?

    • @sotasolar
      @sotasolar  Před 3 měsíci +2

      I have the equipment and parts just not much demand. We might be doing one soon. Battery prices have come down so much , the advantage is less and less.

    • @SunsetSlimess
      @SunsetSlimess Před 3 měsíci

      @@sotasolar Yep, I hear that! I have about 1800ah in cells and 8-9 BMS sitting around waiting for customers too.

  • @bradkiefer777
    @bradkiefer777 Před 15 dny

    Question for you. Can you do parallel with a 3 wire instead of 4? I have 2 victron multiplus 2000va.

  • @marka9083
    @marka9083 Před 3 měsíci

    Great info and install! I like the din rail splice connectors for the AC. Question, do you have any performance issues due to the AC lines being different length between the inverters? Just wondering how precise it really needs to be.

    • @sotasolar
      @sotasolar  Před 3 měsíci

      None reported, did a load test on it in part 2 released today.

    • @marka9083
      @marka9083 Před 3 měsíci

      @@sotasolar just watched part 2 and saw that. Didn't known if you look into individual inverters to confirm balancing. Regardless, looks nice and ran cool

  • @saltytrips
    @saltytrips Před 3 měsíci

    🤣 did you watch our parallel inverter install, we did the same thing with the color coordinating Dinkle connections.

    • @ChrisBairKeto
      @ChrisBairKeto Před 3 měsíci +1

      I did, I still can't figure out how to get the matching colors in the larger size. All they have on Amazon and their own website are black and white or black and red, no green unless you get the smaller conductor size.

    • @sotasolar
      @sotasolar  Před 3 měsíci +1

      Good to know we’re not alone. I did not see your video on it. From our commercial control panel work we had some laying around and I just got to thinking.

    • @saltytrips
      @saltytrips Před 3 měsíci

      @@sotasolar if I would have known about these for our first install I would have used them to splice in the shore to MP+ 2 connection. On another note, I didn’t realize we would be limited to 18.5 amp on power assist. We want to hook up too 15 amp and having trouble looking for alternatives. Maybe a Blue Smart 24v charger connected to the Lynx distributor 🤷‍♂️

    • @sotasolar
      @sotasolar  Před 2 měsíci +1

      There is a third option that’s quite controversial and does have some drawbacks where you set each inverter up independently and you run one inverter into the other, and you would disable the charger on one.
      You had another option is to use the older style multi plus inverters we use those on our bus and those go down to 14 A AC input current limit as a pair. The downside there is you have to rewire the panel as 30 amp only however on our bus, it’s work just fine , we run two air conditioners, electric hot water, microwave, etc.

  • @tedhamilton2362
    @tedhamilton2362 Před 2 měsíci

    Will you add a pre-charger switch to charge the inverter capacitors before full-time connection to batteries?

    • @sotasolar
      @sotasolar  Před 2 měsíci +1

      We’ve never done it. We usually program with a lab supply with restricted amps, in production we recommend starting solar first , this will keep amps restricted.
      Even still we’ve never had any components fail, batteries or inverters due to the surge on startup. ¯\_(ツ)_/¯

  • @earlzeis35
    @earlzeis35 Před 2 měsíci

    Is that 3X3 cable raceway?

  • @samfish6938
    @samfish6938 Před 2 měsíci

    Deflategate i see some one deflated the game ball was it tom brady