Sidewall & endwall on log house. Metal roof on log house
Vložit
- čas přidán 5. 09. 2024
- Learn how to install sidewall and end wall flashing on a log house metal roof. On day 3 we’re finishing up the roof.
Here are some of the tools we like to use, these can be found on amazon via the following links;
Left off-set snips: amzn.to/3uJD5kF
Right off-set snips: amzn.to/3NcSpMS
Edge roller: amzn.to/3GtsBs6
The caulk we Love to use (super strong!!) amzn.to/3GzyF2r
18” hand break: amzn.to/3GrB0wn
You can also get this in a 24” length for Hemming the bottoms of valley angles on standing seam.
Our favorite gloves: amzn.to/3T5jp4R
Our favorite roofing Shoes: amzn.to/482YyU4
(AKA) Hiking Boots)
Power Metal Shear: amzn.to/46IIh5B
Impact driver: amzn.to/3t26iqn
Hand Break 6”: amzn.to/3R6uiRb
Hand Notcher to notch the bottom edges of your standing seam panel for Hemming the bottoms if they don’t come pre-notched from the manufacturer: amzn.to/3Tbl88K
Rubber Mallet: amzn.to/46HAk0A
I am an Amazon associate, and may earn a commission if you purchase any of the products using the links I have listed in the description.
Well done. I am a home inspector writing a report identifying a poorly installed sidewall flashing. I was searching the web for a clear detail to insert as an example of another way to install such a flashing and came upon your video. I have snatched a snipit to insert in my report. Nice to see pride and skills still remain with some!
Great job man definitely apprecitate your attention to detail
Beautiful work!
Yavaş çekim yaparsanız faydalı olur teşekkür
Can you tell me what you used for the snow stoppers? We put a metal roof on our log home.. and didn't do the snow stoppers.. and last year during our first winter.. we got several snow avalanches. We gotta look into getting the snow guards soon. Thx.
What type of metal roof do you have?
Check out our instagram page, plankroofingllc and we can connect there.
You will probably need to find a metal roofing manufacturer that makes custom trims.
The ones we use are about 10’ long and get screwed to the roof on a regular pole barn steel. With standing seam metal roof the snow guards we use are similar but get clamped to the ribs.
goofy design with the chimney. if it is non functional I would not have one. nice work.
I believe the chimney will be functional.
Thanks
The house was still being finished out on the inside.
This should have been standing seam. And you should have used high temp ice and water under the entire roof.
We were contracted to do this roof so it wasn’t our choice what type of roof they used,
I agree standing seam would be better.