Very good..Thank you.❤❤❤
Hello bro, is there any possibility of downgrading the ps4 from version 11.02 to 11.0 if I have already downloaded the update file 11.50 but not yet installed it? I'd appreciate it if you could answer my doubt.🇧🇷
please currently the exploit only supports up 11.00 but for the downgrade am not sure about that. during PS3 time if you want to downgrade in the early 2014 coming you will have buy an E3 Flasher before you can downgrade but for ps4 there no way currently, so please if have extra cash then buy one on a lower firmware for this purposes.
@@topgamingtech25 Currently there are ways to downgrade the PS4, that's why my question, the method in question uses Tensy 2.0++, but thanks for the answer...
@@felipesiebra6584 the process might be very very dangerous even if possible.
@@topgamingtech25 I agree, but no problem for those who have technical knowledge in electronic repairs like me.
Yes you can downgrade from 11.02 to the previous firmware. I’ve done it on 2 slims and 2 Pro consoles.
Why are you enabling rest mode support? Because, when you restart or switch back after a power failure you have to go through the whole jailbreak thing again, Right. and this is super stable. 😅😂. Anyway nice video. Thanks for the upload and the supportive links.
first for the rest mode, it work perfectly but if power outage or failure occurs then the whole process must restart.
For the supportive link, you subscribe for now and soon i may create one.
Tbh 11.00 is really stable. Its a pain to execute but is not as bad as its python based predecessor. C++ is a whole heap faster and the success rate is great. For some people it takes roughly the same ammount of time as previous firmwares web based exploit. So the same could be said with 9.00 and below whatever be the way to execute the exploit you still have to re jailbreak the console every time its switched back on
I ran it on version 10.01 and it worked ❤ But the apollo save tool program does not support version 10.01 😢 Is there a way to run the save program?
i have a problem with stage 2 payload ps4 (11.00, ppwn)
[*] Sending stage2 payload...
[ERROR: \build\_deps\pcapplusplus-src\Pcap++\src\PcapLiveDevice.cpp: sendPacket:628] Error sending packet: send error: PacketSendPacket failed: A device attached to the system is not functioning. (31
I have to do jailbreak anytime when i restart the ps4. Everything works well. Just do this jailbreak every reset...
It seems not to copy the goldhen to hdd automatically...how i can do ?
after the first jailbreak godlehen will automatically be copied to the internal hdd
why my ps4 after i turn off and power on may jailbreak is gone how to fix this thanks
yeah, it not a permanent jailbreak like ps3 cfw
so just put it in rest mode instead
go to goldhen. go to settings, check rest mode.
Maybe this out of topic, why my homebrew and pkg remote downloader ps4 can't launch
Doesn't work, my ps4 sent off every time, i have ps4 pro CUH-7216B, any solution please?
my long cable does not work flawlessly as compared to the short one.
also make sure ethernet ports and the cable brash are also clean, then try again.
My ps4 crashe every time after currpt object not found and failed and it retry 2 to 3 time and os4 automatically crashes
My Ps4 CUH-1216B
First Fails on scanning for corrupted object 3 times and then crashes 4th time on Sending IPCP Configure ACK
Does anyone experiencing slowing issue in wwe 2k24?I have a standard ps4 slim and I dont know,maybe i am playing v11 game on v9.00.😢😢
that has nothing to do with it, it might be your internal HDD. , or does that happen when you play other games ?
Mein is stuck at waiting for LCP configure reject plz help 🙏🏻
@@topgamingtech25it works but after 6 to 9 tries is there any quickest way to do?
mine crashes when Sending IPCP configure ACK
@@islemghimouz9964 wow!, please does your own also crashes at IPCP configure ACK or KASLR Defeat ?
My ps4 is 11.02 is it possible to jailbreak
currently no, the exploit work up to 11.00 but maybe next exploit will support 11.02
I'm always getting this error "[+] STAGE 4: Arbitrary payload execution
[*] Sending stage2 payload...
[ERROR: \build\_deps\pcapplusplus-src\Pcap++\src\PcapLiveDevice.cpp: sendPacket:628] Error sending packet: send error: PacketSendPacket failed: Um dispositivo ligado ao sistema não está a funcionar. (31)"
Do you have any idea what may be the cause?
sir ps4 slim not jailbreak 2016 2216 2116 model kernal error mother board error
@@rykfun4804 wow!, okay soon new improvement will be released and it mat fix that issue.
Its says Done stage 4 complete but nothing happens on my console any idea whats going on ?
restart pc, disconnect the ethernet cable, then reconnect and try again
@@topgamingtech25 i just did same problem please can you confirm if PS4 Pro Model CUH-7016B can be exploited to 11.00 because I get PPPwned notification but no goldhen notification
@@cryjin4776 okay, wait for an hour then try again, this time also make sure pc is turn off for an hour or more
@@topgamingtech25 I left console and pc off for almost 8 hours all it happens is its saying stage 4 done and nothing happens on my console
I have always this message:
[+] STAGE 4: Arbitrary payload execution
[*] Sending stage2 payload...
[ERROR: \build\_deps\pcapplusplus-src\Pcap++\src\PcapLiveDevice.cpp: sendPacket:628] Error sending packet: send error: PacketSendPacket failed: A device attached to the system is not functioning. (31)
Please anybody help me? I follow all the instructions. Thanks
please what is your ps4 model example CUH .......... ?
I will post this on my twitter so please let me know your ps4's model
@@topgamingtech25 My friend the version is CUH-2016B. FW 9.00. With older type of jailbreak i haven't problem.
@@topgamingtech25 im getting this error to and im on firmware 11.00 i looked online and found nothing on how to fix it some help would be really appreciated.
se me sigue apagando la consola en defeat KSMR
¡guau!, ok, por favor, ¿en qué versión estás y qué modelo de ps4 estás usando?
My system 10.50 what can i do 😢
you can test the exploit and see if PPPwn shows up, but for goldhen, it currently supports on 11.00, 10,01 and 10.00 at the highest firmware.
So please test the app and let see if PPPwn pop up message shows up on your console.
Will this work with 9.03
it will work but the goldhen 2.4.b17.2 only support firmware 10.00, 10.01, 11.00 and 9.00 0r lower.
@@aliyumuhammad4279 you are welcome, please subscribe to the channel it encourages me to make more videos.
most i jailbreak my ps4 anytime i put it on
after the first jailbreak goldhen will be automatically copy to the internal hdd of your ps4
My sistem is 11.50 what can i do?
if you have extra cash then buy another on lower firmware for this purpose.
Kernel panic no vale para nada
Es parte del proceso, puedes usar el modo de descanso después del primer éxito.
@@antoniomartin82 El jailbreak no es 100% estable, por eso, si puedes usar el modo de descanso, eso puede ayudar a prevenir demasiados pánicos en el kernel.
Mine goes through the whole damn process to ppwned. Payload NEVER loads
@@timesuprepo2then before running the loader, make sure to put goldhen into the root
directory of the exfat USB and insert it into ps4
PS4 Jailbreak's Goldhen 2.4.b17.2 features PSGO'S Lite Loader v3.9
........................................................................................
Please subscribe, like and comment down below if you have any question.