Have you Tried this Technique | Groundeffected.com
Vložit
- čas přidán 28. 05. 2022
- I used the new chitubox pro 1.2.0 to print Sanix Master Chief from Halo. As usual I describe how I painted the model from start to finish.
To download chitu box pro : www.chitubox.com/en/download/... www.chitubox.com/en/download/...
Sanix - master chief : sanix3d.com/#!/HALO-Master-CH...
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected.com
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my CZcams channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected - Jak na to + styl
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Your Master Chief came out blasting ! Great face shield touch btw.
Nice effect on the visor.
Thank you dude. Had to squeeze this one in to meet my upload times and the visor was my saving grace hahaha
I'm not sure but I think this is your first sponsorship, if it is then congrats my man and this model is looking insane as always
Technically not really but it is the first video fully sponsored so technically yea it is lol. Thank you!
Technically not really but it is the first video fully sponsored so technically yea it is lol. Thank you!
You have single handedly convinced me to change from what I'm using now to chitubox!
Chitubox (at least the basic version) can get frickin' slow when slicing and/or saving a file. I'm talking over 15 minutes of waiting just for the file to save (full plate of a Photon Mono X 6K)! It's very random though. Sometimes it would just fly through things quickly but more often than not I find myself force quitting it and firing up free version of Lychee Slicer to do the actual slicing (I use Prusa Slicer for supports and hollowing). Lychee Slicer takes a fraction of the time to slice and export the file for printing...
Great news haha
@@DavidRelich I actually find chitu slices faster then lychee on my system, however when moving models and stuff like that lychee is smoother, so its 50/50 for me really on which is better overall
I love your Master chief, one thing i would paint different is the visor: i would use liquid chrome color and then some transparent gold/yellow on top so its really reflectiv.
Yea but I don’t like that. I have painted in the reflections which arguably is more difficult than just chrome with a transparent colour over it. I did this on purpose because it takes more skill to do that than flat colours. And in my opinion looks better than flat colours.
Awesome as usual Brent! Love how you did the visor.
Thank you dude.
that's bad ass .id be proper proud of that
Thank you my guy appreciate
Beautiful work on Chief. Now I want one. Also it is weird to say but thanks for the ad. I didn't know chitubox had editing capabilities. Sometimes a simple edit is needed and can be a pain in the ass. I will give this a look.
Haha yea it is weird but I appreciate all kinds of weirdness haha and thanks for watching.
You are a great artist, I saw your work on Instagram and I was really surprised, what a great talent. Thank you very much for the video, it will be very useful for my HALO project. Congratulations.
this looks fantastic brother
Thank you dude.
Oh way to f-ing go on that visor man! Holy smokes! Well, aren't you just a gosh durn huckleberry. I am impressed!
so great man, also love the halo music at the end
Haha I had to find a cover because CZcams would copyright me if I used the original. It’s pretty close though.
great job as always.
Thank you dude.
As always amazing work 👍
Always makes my day more fun watching your video's
D.
Very good, my favorite❤
Superb as usual.
Thank you dude!
Awesome work, and now I have the Halo soundtrack stuck in my head :)
I wanted to use the original so bad but you know, copyright.
Sweet, love how you did the visor effect!
Thanks dude. Yea the visor is the main focus of master chief I had to do something to make it eye catching.
Good stuff man! I learn something from every video!
That’s great to hear dude!!
GG as always
I have two questions master :)
1. will you make a video on how to manage supports AFTER printing ? When my prints are finished the side with supports is always very soft, full of small gaps which are a pain to sand. sometimes this surface is also a little bit bended :(
2. 4K vs 8K ? do you think there is a real quality bump ? Do you plan to buy a 8K printer ?
Thank you
1 I will try to do a video on this in future.
2 there is a massive difference between 2k-4K and 4K-8k most definitely don’t let anyone tell you otherwise. Same people who say there’s no difference between playing a game at 60fps and 120fps there is definitely a difference. I do plan on getting 8k printers when I can afford to. Just can’t afford the machines at the moment.
here is some words in the comments box ... window , Thursday, batman , seven , elephant , monster , rocket , monsoon , sniffing
All of which are excellent words thank you.
very cool
Thanks my dude.
Here's some words for you.... just hope I'm using the correct box
I've been using Chitubox for a while as it is the only slicer that has a profile.for my printer. I will look into the pro version. Thanks!
Pro version has quite a few features that are really interesting. It’s fine a long way since 2020 chitubox!!
So off topic question, I've been watching all your vids and love them, but I gotta know where you get your artwork and posters from? I'd love some for myself
Um some are gifts from other artists and some I just got at the range (kinda like a dollar store)
@@Groundeffected thanks mate, and yeah I'm from UK so I know the range haha
@@Zillawill haha well dude they have some sick marvel canvases now and then go have a look and for cheap too!
Awesome work as per….
Thank you so much dude.
Now THAT is one damn well looking HALO thing! 😍
Meant to ask a while back, where did you find the airbrush stand STL? Been looking for one and none of those I found look decent enough to convince me to waste filament and time on 🤪 Cheers!
Ah man it’s in one of my video descriptions I can’t remember which. If I get a gap later I’ll try find it again and I’ll share the link
@@Groundeffected Legend! If it's in one of the video descriptions, I'll do the search myself. No need to waste any of your precious time! Cheers.
leaving some words to my pal here
Thank you for the words my dude.
Can you make a Doomslayer please? :)
Word
Some words! ;-)
Oh....great work buddy!
Thank you dude. Words are important to the growth of the channel.
What scale is it
8:58 What color did you dry brush the armor with?
Dude. It was months ago I can’t remember but it probs was just a bright light green and maybe silver in some bits
@@Groundeffected Yeah, light green. I tried a normal green, and it contrasts too much. Looks bad.
@@voldy3565 try add yellow
@@Groundeffected Yeah. I also thought, for the black "undersuit", to try and dry brush it with some dark grey. Looks great.
So what does the chitchubox firmware do?
The firmware I installed was just the updated firmware from phrozen chitubox is the slicer and the new pro version requires you to update the firmware on your printer in order to use the pro version of the new chitubox update. Hope that makes sense?
I follow you here from Brazil, do you have any of the game gears of war?
First