Cura 3D Slicer For Beginners! In Depth Tutorial
Vložit
- čas přidán 1. 01. 2018
- UPDATED VIDEO:
• [Updated] The Ultimate...
Download Cura:
ultimaker.com/en/products/ult...
In this video I show how to use Cura Slicer software to slice and 3d print models!
Join the community discord:
3dnow.cc/discord
________________________________________________
Awesome 3D Printing Products (Affiliate Links):
Gearbest: bit.ly/39DKUYE
FilamentOne: bit.ly/2R70qWD
Slice Engineering: bit.ly/39ELENt
________________________________________________
Visit my website: 3dnow.tech
Follow me on Instagram - / 3d.now
Follow me on Twitter - / 3dnowprinting
Song: Footsteps by Jef - Věda a technologie
Literally been searching for hours on why my prints wouldn't come out right. I followed you step by step and now they come out GREAT
So I was going into 3D printing without knowing about slicing too much, this video really helps me out and gets me excited for what I can do in the future thank you.
Outstanding instruction...I taught at a Junior College Drafting and 3D printing....Great tone and verbal pace...Cheers Jeff
Most intuitive video I’ve seen yet.. I’ve watched about 100 today. THANK YOU
Thanks so much for a very clear, informative and helpful introduction to Cura. Great job!
Thanks so much for creating this excellent tutorial, Jack. I'm a 3D printing newbie, and this has helped a lot!
Ask Holy Spirit to teach you and to guide
you. I would recommend the CZcams Cleveland street preachers and follow Jesus no man no religion. Be holy and obey Jesus. Hebrews 5:9 "salvation is for those who obey.
Jesus says if you love me keep my commandments (John 14:15). Jesus even says if you keep my commandments then you shall abide in my love (John 15:10).g
Thanks for this video. I just got my first 3-D printer and this is exactly what I needed to get started.
My 3d printer arrives on Sunday. I am going to start setting up cura tomorrow.
This makes things alot easier. I learned a lot! Thanks for the video!
Thank you. As a complete novice to 3D printing I found this to be a very clear, concise and worthwhile tutorial on setting Cura up. Now I'd best get printing!
Ask Holy Spirit to teach you and to guide
you. I would recommend the CZcams Cleveland street preachers and follow Jesus no man no religion. Be holy and obey Jesus. Hebrews 5:9 "salvation is for those who obey.
Jesus says if you love me keep my commandments (John 14:15). Jesus even says if you keep my commandments then you shall abide in my love (John 15:10).g
Super helpful introduction to Cura. Really breaks down the basics into an easy to follow format.
Thanks a lot! This quick tutorial really jogged my memory and updated me on this software easily! I've used Cura 14.07 a few years ago and now I have the opportunity to use a new printer so I need to update my knowledge on these once more. Great work! :) Have a nice day!
Ask Holy Spirit to teach you and to guide
you. I would recommend the CZcams Cleveland street preachers and follow Jesus no man no religion. Be holy and obey Jesus. Hebrews 5:9 "salvation is for those who obey.
Jesus says if you love me keep my commandments (John 14:15). Jesus even says if you keep my commandments then you shall abide in my love (John 15:10).r
What a great video, this has taken all the fear i had about slicing away. thank you so much. im looking forward to my sidewinder x1 to be delivered and to get printing for the first time ever.
As a nooby, this was exactly what I was looking to find. Easy to follow and understand. Thanks!
Thanks for the tutorial. Just got my first printer so this is all new to me. This was really useful.
Thx mate wonderful tutorial as I just got my very 1st 3d printer, just have to assemble it and calibrate etc. But have found this vid extremely helpful as Cura is the software that came with it. A whole new steep learning curve I have ahead of me but like with all hobbies its part of the fun. Cheers buddy another subscriber to your brill channel
This was great! Very basic for us newbies! I understood what you were saying. Please keep them coming!
I just want to say good job on the video man, I am a almost 20 year construction that not in the service just I’ve been doing construction in my entire life, I have never been computer savvy but your video made these beginner steps so much easier in within the first five minutes of you explaining how to use Cura you answered all of my questions, thank you very much for your time I will definitely like and subscribe.
Ask Holy Spirit to teach you and to guide
you. I would recommend the CZcams Cleveland street preachers and follow Jesus no man no religion. Be holy and obey Jesus. Hebrews 5:9 "salvation is for those who obey.
Jesus says if you love me keep my commandments (John 14:15). Jesus even says if you keep my commandments then you shall abide in my love (John 15:10).u
I am brand new to Cura and this is so helpful! Thank you so much!
Thanks for the content. I'm in a product and tool design class, and i'm currently learning 3D printing. I even ordered my own to use at home!
Thank you for this perfect tutorial, answered all the questions i had about cura. 👍🏻
Only question I still had was whether or not the Ender 3 v2 works in ender 3 pro settings because there aren’t any for the v2
Great vid! I just got my first printer and used your vid to get me started w this software.
Omg. Thank you so much for this. Been researching for the longest time.
Very helpful for beginners like myself,You my friend just got another sub,Thank you
Thank you for making it easy to understand the basics so we can start printing. Great video. New sub.
Man I had a ton of questions prior to watching this video. Thank you for the tutorial it was helpful.
This was a really good introduction. It will be even better to make such educational video for the advanced settings. Keep up the good work my friend
I haven't bought a 3D printer yet but you made this video so well and demystified a lot of stuff that I didn't understand that now I may well do so thank you so much.
I think that SelfCAD is the best for beginners
Sam Friedman is selfcad need to pay for print ?
Thanks so much now I finally know what slicing is and how to do it, you got a new subscriber!
New to 3D printing and this video helped me so much! Thank you for your efforts!!!
I learned more watching your video than the last day and a half trolling CZcams trying to prevent making NOOB errors! Thank you. Many times over.
Thanks great work on the video .....i get my new ender 3 tonight your video is a wonderful help!
Thank you for doing these videos. My CR-10S is on its way and I'm learning as fast as I can. :)
i went from clueless to understanding in under 15 minutes, perfectly explained.
I’ve had my 3D printer for two years, the first six months I wasn’t able to use due to the fact that my mom did not like the smell of burning PLA, then I just took 3 days to understand the settings and how the machine works and how to start it since it needs a little hand holding as I call it. But after I got the test print done I was intimidated by the whole idea of having to make a actual print. So for the last year and a half I haven’t touched it. Thank you this was very helpful
Great video man! Just got my Ender 3 Pro and already printing!
Thank you for this useful tutorial -often skipped or rushed through on other sites
Thank you for your time and knowledge for a newbie it is important to start somewhere.Easy to follow you,thank you again
3 years later still super useful thank you my good sir😁
Great video! You made it simple to follow. Thanks
Thank you that was very informative at a great pace.
Really very good and perfect presentation for new ones
Wow. Great explanation of Cura. (I had no idea this was possible.)
Great video, thankyou - very clear and easy to learn!
Definitely helped explain a lot of what I needed to know! Thanks
Awesome video! Helped me a lot!
Dude thanks!! I am new to 3D printing and it is sooooooo cool!!
Nice thank you, from a beginner point of view this was helpful.
Awesome video I found exactly what I was looking for. Thank you
And just now I took the time to read a couple messages and I see that I’m not the only person that you’ve helped, great job man …
Awesome introduction; thanks for posting and sharing.
As a beginner, there seems to be a lot of steps to making a model and printing it. From the context here, it seems the model is designed in a cad program and then loaded into a "slicer". It would be helpful if someone did an overview showing how these relate to each other and what works with what. There seem to be a lot of ways to build models and different kinds of files. What works with what?
EXCELLENT Video, sir! Just what I was looking for. I'm ordering an Anycubic Mega 3d Printer to replace my old Makerbot 2x Replicator......and was anxious as far as having to relearn the slicing software from scratch. Your video really saved my ass. Subscribing for sure.........
Thank you, this was so helpful.
Thanks my man! Great stuff! I am only successful at printing business card holders currently with my Ender3
I want to thank you very much you just showed me more in this video. Than 50 videos I watched THANK YOU VERY MUCK
Excellent video. I am now subscribing. Thanks.
Thankyou, much appreciated, I was stumped.
Video is a big help. Thanks for sharing.
ty for making it simple, made a subscriber
Thank you so much for weeks now I been searching how to use Cura Slicer! I have the new Cura 4.9 it has more information to settings.
Got my first 3D print working now. I think that adjusting the filament size made a big difference. After that, just needed to made small adjustments on the bed and I was good to go.
Simple, concise. Thanks!
My Ender 3 turned up yesterday and this video helped a lot 👍🏻
Great very clear...step by step
You are one of the best, THANK YOU!😜
Very helpful tutorial. Thanks
Thanks man, great video
Thank you Thank you Thank you!!! Clear and to the point.
Thanks for the very informative video! Even though im on cura 4.6 it was very helpful!!
Thanks this helped me hopefully I can get a bigger print since yo showed me how to resize the print settings. :-) Thanks.
Super Dope. Thank You!!!
Thanks for explaining! Would love to see an updated version for v4.8
Great informative video!
Thanks this is an excellent tutorial
Wow thanks very helpful , you just got another sub.
Salute u hero. U resolved big issue
Very informative, thanks
So good thankyou!
very simple explanation, thanks
Great video. Thanks!
You are great man ❤️
Thanks this helped a ton.
good video!
thank you very much
Thank you it was very helpful
Great video. Thank you.
I like your spacex background.
Thank you for explaining this so clearly. I feel confident enough now to where I do believe that I can slice and print my first object. When I do I'll come back I let you know!
did you come back?
Very informative thanks
Thanks for the content
nice one man!
thanks great and simple description. One question on the supports. I was confused on what you said for a setting. Can I just use the "recommended" tab and that will setup the supports correctly?
G'day, l really enjoyed your video, very informative, thank you.
That background music does my head in. Round and round and round and round and aarrggghhhh!
Nice video! Which mac do you use?
Thanks for this video, man I almost gave up on printing all together not getting the print anything else then the tests on the micro card. And when I got I printing it printed only on the edge and not center plate. Hehe hard being a noob
I agree, very good video and very good information
Very helpful thank you
Awesome video, thanks :-)
VERY GOOD JOB!
Always wondered if i could 3D print a firecracker, so i designed one in CAD, I am trying out the Tri-Hexagon infill pattern, it is supposedly one of the strongest. Also printing it at 220C, bed temp is 65.