FMS - Pilatus PC-21 - 1.1m - Unbox, Build, Radio Setup, & Maiden Flights
Vložit
- čas přidán 3. 03. 2021
- bprc.me/FMS_PC21_Pilatus | bprc.me/HH_FMS_PC21_Pilatus
bprc.me/AR631
bprc.me/NX8
bprc.me/4S_3200
bprc.me/4S_2700
Support Us
/ brianphillips
www.paypal.me/brianphillipsrc
bprc.me/CZcamsMembership
bprc.me/Horizon
bprc.me/HorizonEU
bprc.me/TowerHobbies
bprc.me/FMS
bprc.me/BeginnerPlanes
bprc.me/AMain
bprc.me/Amazon
bprc.me/ArrowsRC
bprc.me/Banggood
bprc.me/BitgoHobby
bprc.me/BuddyRC
bprc.me/EXHOBBY
bprc.me/FairRC
bprc.me/RCGoing
bprc.me/TurbinesRC
bprc.me/GroundVehicles
bprc.me/EBike
✈ Please visit www.BrianPhillipsRC.com to see a complete list of our affiliates.
We may earn small commissions when you purchase from our links, helping to support our CZcams channel and our family of six! Thank you!
#rc #airplane #pilatus
The length of your videos speaks volumes to the passion you have for this great hobby of ours as well as to how much you want to help others succeed and continue on their journey through the amazing world of R/C!! I'm sure I speak for the majority out here in CZcams-land when I send out a heartfelt thanks for all that you and your wonderful camera crew do!! Keep up the amazing content my friends!! Stay warm out there!! ;)
Thanks so much! we do want to share the REAL experience, and it's not a 5 minute job, even though it could be edited to be short...I want to show the struggles along the way, that's where we have time to teach and learn from one another...otherwise it's just a stock, factory promo video, which are dime a dozen and prove almost nothing!
I’m busy rebuilding mine, by far my favourite as a passionate Pilatus fanatic. I wanted one of these with a sore heart but could never get one here until a mate found one that was quite abused, got a replacement fuz, new prop, made my own more scale spinner, rebuilding the cockpit and hatch completely, also more scale and detailed, redoing the wing tips to a scale profile (larger than the stock tips) new gear doors, a Patrouille du Suiss white and red scheme, dummy underwing tanks, full placard decals including the canopy breakaway patterns and a host of refinements, it’s going to be a competition winner, the pilot figure is a full figure fighter pilot that cost almost what the model costs! If you want to add more detail and would like the decal set I’d be happy to share the artwork with you, I just print on A4 label paper and coat it with polyurethane varnish.
Sounds very cool! Good luck with that beauty!!!
She flies GREAT stock, so I hope with all the mods, she'll still fly just as amazing for you!
Thank you, thank you…….your videos are helping a newbie rc pilot learn all of this. I couldn’t imagine how hard this would be without your channel. 👍🏻
Awesome! Thanks! Glad you're getting the desired outcome ;)
Thanks again Brian for turning me on to this plane. I bought it thru your link and I maiden it today and she flies awesome. Also great job with the forward programming. I'm computer stupid and you made me a genius. Thanks man
So glad you're making progress! This plane is AWESOME!!!
We are house hunting Brian.My list of demands is now enough property to take off and land on!(my wife thanks you)...lol...great flight!.
NICE! Good for you Sean! Whenever I tell a builder or anyone in the construction field WHY I need to make things such and such, they kinda roll their eyes at me, but I just keep on keeping on ;)
So glad you also had to move your battery that far forward. I just set mine up this week, and was worried about how far I had to move mine. That front strap is barely holding on to the back of my battery, lol. I put a rubber strip on the bottom to help it stay in place.
I agree, pretty weird, BUT I bet she'd fly with it back a waze too, now that I've had her up about 6+ flights. LOVING THIS PLANE!
@@BrianPhillipsRC Hey, do you have a Patreon?
@@BrianPhillipsRC Hey, I was able to maiden my PC-21 Pilates this morning. I reduced the throw on the flaps cause I heard they were extreme. Takeoff was perfect, and only needed 2 clicks of right Aileron. Very stable, predictable, and controllable. Not as fast as you might think, but its rock stable, even inverted and in a knife edge. My first "jet trainer" and first time with retracts. Great experience for sure. Can't wait to fly it some more. Thanks for the video!
I followed your setting video for the carbon cub s 2 and dang it was great,thank you for your time effort and the fun
I'm so glad you did! I pretty much do it for most every plane now, so there's less guess work for all of you following along. Thanks for the feedback!
Thanks for the video, perfect for me as I have just started building one including setting up the transmitter. Greetings from Austria Europe
Glad it helped, and thanks for being here with us!!! Thanks
We have one just built, but not flown. Cannot wait. Thanks, guys!
It is AMAZING - you will LOVE it! So much better than I expected it might be!!!
I bought a pack of self-adhesive screw cover caps that are small white circular 9/16" disks that I use to mark the CG on my planes. They are raised up slightly and have a texture on them so I can easily find them to check CG whether it is a high wing or low wing.
NICE! Do they BLOW off???
@@BrianPhillipsRC Nope, they stick really well.
Thank you you finally got the Plautus. I have had this for a year and it's been setting right above my head put together and actually bound to a remote and I have the stabiliser put in after market. But not many people fly this plane other than professionals on The channels that are sponsored by fMS or horizon. And I like how you put down all the settings so at least I have this one to go off of and I can fly it maybe
Glad I could help! This plane flies AWESOME!!! You gotta get it up in the air ASAP!!!
Hi BRIAN and CAMERA CREW. What a wonderful looking plane. She FLYS GREAT looks GREAT. If it was mine now would have to some how put some more white on the bottom of her. Other than that I think it a GREAT looking plane. THANKYOU for posting.🇬🇧🛫✈️🛩️🚁🛬♥️ BRIAN PHILLIPS RC 🇺🇸 🌟👍🤩
Glad you enjoyed it - this plane is wonderful! (P.S. I removed your duplicate comment...looked like a CZcams glitch, possibly)
THAT SNOW FREEZING COLD TELL ME GREAT LENGTHS SPEAKS VOLUME'S TO ME ONE TOUGH TEAM A TOTAL PASSION FOR RC PLANES IS OUTSTANDING MUCH APPRECIATED AUSTRALIA 🇦🇺 👍 SERIOUS
Oh yeah! We love flying - even when it's COOOOOOOOLD ;) But we're not thinking about cold right now, like 95 F out right now ;)
I've had to watch 20+ videos before I knew this was one of my favorite channels you just got a subscriber I'm sure you have reviewed any plane I want to buy
Welcome aboard! Thanks for the kind words!!! We've got a lot of them for you too ;)
Brian! I just bought this plane and got it yesterday! I put water based clear polyurethane on mine and it really looks amazing now. I should be able to do my maiden tomorrow 😁😁😁👍
Awesome! She is wonderful in the air!!! Enjoy ;)
Thanks for the video. I jumped on here after I picked one of these up and ran out of battery tray before I got the CG correct. I wanted to make sure I wasn't that far off and your battery is in the same spot. So thanks for confirmation. You have to love that they design these and make you think they never flew the damn things. Just put them out and let us figure it out.
LOL Exactly!!! She's an AMAZING plane for sure!
Wow great camera work once again that is not easy to film a rc plane not as easy as it looks you do great and the pilot is very lucky to have ya
Thanks Ryan!
That plane is so beautiful!!!!
She totally is!
Beautiful plane love the 5 blade prop retracts and flaps Nice flying Brian Hope Camera Crew is feeling better God bless
Yep, all is well, she had a headache and was better mid way through the evening. Thanks Erric! As for the flight, I took it up (off camera) last night for 4 flights, all on 3200 or 2700mah and each flight was better than the last!!!
If you had a slider-equipped transmitter (NX8 or higher I think) you could get full gains for slower flight and landing (e.g. 90 roll at full but at half you're at 45) and turn it off completely as you did with the three position switch. It'll also let you have fine tuned precision for adjusting AS3X, especially with jets which love wobbling if they're not set up just right.
I want soooooo badly to have a peto tube for reactive AS3X, but don't think I'll be getting this any time soon ;(
Thank you Brian and camera crew beautiful plane Thanks for weathering the weather for us From Ohio.
Glad you enjoyed it - we're already moving on to better weather around here with 60+ F This weekend!!!!!! We can't wait - hope to get a bunch of good "Second Thoughts" videos done!
Your videos are so good they make me want to procrastinate the entire day.
Shhhhh - don't let the secret get out!!! LOL
Thanks for procrastinating with us!!!
Thank you guys your videos ,they are really helpful,and that plain is amaziiiiiing 👌👌👌👌
Thanks! It is VERY GOOD! I'm SOOOOO glad I did this one!
Keep showing every step ! Saves me from reading the instructions. :)
We will ;) I guess it's become part of our "specialty".
You make a great team, not only you’re a great pilot, your camera crew is fantastic, I know about taking videos to airplane models, so I appreciate her job, again you’re a great team, I enjoy your videos in front if your house, thanks for that...
Thanks Arturo! We're glad you're enjoying things! Thanks for being part of our experience!
Great job, thank you guys.
Thanks G Bro!
Wow it looks amazing
It is! LOVE this plane! Less than $300 out the door, and SOOOO GOOD!
Love the pilatus planes Brian 🤙
Me too! So pretty! Love the way it flies! I did fly it in calm last night, but Camera Crew was out ;( so no camera work...it was GLORIOUS!!!
Love the look. That color is stunning. Outstanding electronics bay. I like to be able to stuff more than a battery and receiver inside my planes. It seems like a lot of plane for $200.
Well, to be fair, the Rx is another few bucks, I've been saying under $300, but it's about the cost of the other BNF planes, if you do it like I did with the AR631 (which has been really nice!).
Even at
I took a drink at every 'thats what she said' moment. I could hardly stand up by the end
AWESOME!!!!
@@BrianPhillipsRC you also convinced me to buy an FMS PC21!
This plane is awesome
I think it is too!
Love the prop on that plane
I do too, but I want to balance it, and I'm kinda reluctant to delve into that project for fear of it being a HUGE pain...
@@BrianPhillipsRC it's not as bad as you think, even a small enhancement to the balance goes a long way (i gave up getting mine perfect after about 30 min). Also, if the prop is at all loose on the shaft throw a little teflon tape on the shaft, it tightened everything up for me.
Nice landing, straight down the center line.
Thanks! Just uploaded out Second thoughts video and still LOVING THIS PLANE. It's one of my favorites, of late....and we've done like 20+ aircraft this year???
Like it, in the Swiss Color, Fantastic, thumb up. Very Agil and Fast. And Respect, butter landing :)
Thanks RCHeliJet! This plane is AMAZING! So well put together, and dialed in with this Rx!!! Loving the SMART packs, and Spectrum's latest Rx'es...so much good stuff coming, it's hard to keep focus on just one item at a time!
Beautiful plane!
It sure is! Love the way it flies. I got a chance to fly her last night for three flights in dead calm - it was AMAZING!
@@BrianPhillipsRC Yeah even in the chop you were flying in on the video it flies very gracefully and smooth.
I just ordered this right now ty.
I have seen this before never got it
I do like the short take off and how quiet it is.
Will be perfect where I live or back yard though.
I always liked the look but just got it now.
Excellent, but who's Ty???
@@BrianPhillipsRC hey thanks that's what I meant lol.
great information in this video thank you..!
@@BrianPhillipsRC I ordered this because of this video too.
Still learning about planes though..thanks.
Reminds me of my old Turbo Raven! Man I loved that airplane....
Did they discontinue it?
I believe that they did...I bought a Seagull models version and converted it to electric. Man did that thing fly! I also converted a 120 size Cap 232 that I loved almost as much.... Both are hard to get now...
It also comes with a Reflex System so you do not need the Safe and AS3X - you can just use a nice Spektrum AR620.. OH I see you got sent one without the Reflex installed - well I Just purchased mine today with Reflex... a bit late to the show bit got it a killer price here in the UK - short servo extension leads and shove it in the back behind the battery.. then you have all the space you want to set the battery so the CG is good...
Yep - the Reflex system is only generally offered overseas, from what I'm gathering....but it does act as an external stabilizer, as I understand. I'd like to try one at some point ;)
its one of my favourite planes, smooth, no gyro required, i have an fms 3648 870kv motor in mine, 850watt 58amp, 80amp esc, quick enough for me on 3000mah 4s 40c 4.5 mins.
I took her out last night in the calm and it was flawless!!!
@@BrianPhillipsRC Yes Brian its a great flyer and looks well in the air . The uprated motor I added gives it that extra climb rate. I added oleo to front retract and I fly off well cut grass no problem, half flaps take off, nose a fraction down on landing approach, flare at last second for almost 3 pointer with mains just a fraction before nose.
Brian, I would love to buy planes through your site, but with a very low fixed income the closest I will
ever get is the RF 9.5, which took me some time to get, it helps with the transmitter, but dose not give
me the feel of flying a real RC plane. I do enjoy watching your site.
Don't feel bad Bill. We don't expect you to pay if you can't, but when and if you do decide, we would really appreciate your support. We're here for you, and hope you can get some fun planes from time to time.
OK, OH Dear! I think I just saw my next plane. Brian you need a turn out on the south end of the runway - you know down towards the bales of hay. Another wide spot out by the mail box would be great too. Then you need to put in runway lights and a tower just for effect.
Yeah I want to do these things too, but with winter, not sure how to get things strong enough to handle the snow and such. ALSO, we have some plans to potentially add 100 feet to the runway.
Got the 1.5 Turbo Timber and 3 3200 mAh 4S for it, you got me considering this one Brian!!!
OK checked the price -thru your link... now I'm really considering. I've even got 2 AR636Bs on the way. Which I may be reach out for help, first time installing them in a new plane. Got the blue tooth cable for forward programming.
almost forgot, luv turbo props too, work for a regional airline and out first 2 aircraft types (Beech 1900D and Dash 8 200/300) were turbos.
Very cool Michael! Forward programming is fairly straight forward, but why not BNF - sooo much easier???
Thanks!
You're welcome! THANK YOU DAVID!!!
Very pretty plane!
Absolutely! She flies good, works good, and small enough to fit in a tight spot!
Need to pick up on the give always keep that house cleared out.thanks
LOL - nice try ;)
I hate to say this old bird may have moved up ahead of the FW 190 on my want list. 😎 I have to say watching all that finesse in placing the receiver knowing you needed to move it was brutal. 😱
It hurt my soul doing it, but all is well ;) So amazing in the air!!!
Brian if you get the nx8 or 10 you can assign the as3x gain channel to the r/h knob so you can adjust in the air way easier ,then when you are happy with that you can permanently set gains on the ground if you like . You commented on mixing in fwd programming don't remember ever seeing that.
I have the NX8 now, and plan to showcase this soon - Thanks Mike!
Wife: I could even do that!
A bit later:
I didnt expect that!
HAHA
LOL
6:23 an Avian 45 amp ESC would let you back taxi, which would be scale for a turbo prop, just saying.....
That would also give me FULL TELEMETRY for the per cell voltages, I do believe, as well - BUT I would need one more channel (Good thing I have the NX8 sitting in the corner taunting me to open it up NOW!!!)
I put a 5S setup in mine, running a 65amp esc and 2200mah 5s battery. I also am running parallel 2x 1800mah 5s combo which it handles no problem. I run the stock prop and this is now its nearly as fast as my EDF's with unlimited vertical (I'm at 5000ft) so you might have that anyways.
AWESOMENESS! I want to try it now!
@@BrianPhillipsRC it would make a great second thoughts video!
We already filmed a second thoughts video, so don't forget we haven't had a chance to try your idea yet ;)
Spread the lips and cram it in, LMAO.. that was just too funny!
;)
How awesome would a Tamiya RC Vehicle build be🤔. A really beautiful plane.
Maybe one day!
I want to put safe and As3x in the arrows f15 and the fms rafale 80. What receiver do you recommend for these aircraft. Thanks
Rx choices I'd choose, and in the order I'd choose them...
AR631 bit.ly/3pYNC3c (This one is a bit cheaper, but slightly less telemetry...but you CAN use an Avian ESC for the "rest" of the Telemetry Data)
AR637T bit.ly/3pW3u86 (This one would work great too)
AR8360T bit.ly/3dKg4n6 (This one might be overkill, but since I don't have the Rafale 80, I can't say with 100% certainty)
Hello brian, sorry about this being a new comment on an old video, but like flying the fms ranger 1220mm but with safe on, safe off im not too comfortable. Does this plane have safe? and would you suggest me buying this plane as i really want to get it.
The only cheese that belongs in my gyro is feta. Sick plane sir, much appreciated for the video.
LOL - nice ;)
Up and over the moon. I need that plane! 😁👋🏻
Yes you do, it's amazing!
@@BrianPhillipsRC ordered!
Nice plane. It flew amazing and not much wind problems. Do you prefer Spektrum TX? What do you feel about Open TX radios?
I love the way it flies, and I definitely prefer Spektrum. They're easier for me to use, and very well thought out, and easy to learn. OpenTx feels clunky, and I have a hard time with it. This is largely due to the fact that I've spent more time with it, but there's a reason I have...it's less frustrating ;)
sweet plane man hi from uk
It sure is!!! Hi there from Central Iowa, USA!
Hey Brian and camera crew. Im putting the AR631 into my night timber x.
With my new NX8!👍 my question is... when setting up AS3X on a tail dragger, should you make it level for initiation? I remember you talking about that on a previous episode?
Thanks in advance
You know, I HAVE THE SAME QUESTION....so I guess I don't know. I'd err on the side of put the plane LEVEL like it's going to fly, but I could be wrong...
@@BrianPhillipsRC cool.
Thanks for answering.
I’m guessing your probably right.
I’ve watched most of your vids.
Feel like we’re friends. Lol
Look at ya now wow what a plane that retract though
It's awesome!
Quick question: I’m about to buy the NX6 as I’m a beginner and my question is if 6 channels is enough for a plane with flaps, lights and gear (for example the Fw190)? Or do I need 7 channels for that? Thanks for the help!
It's a 7 channel transmitter - I know, it's stupid that they call it 6 channel...BUT it is in FACT 7 channels ;)
For $40 more, you can get the NX8....might want to do that for more "shelf life" as you progress through the ranks.
NX bit.ly/3mbVuNB
Just my 2 cents, but I know the NX6 has been phenomenal so far!!!
Hi Brian, Come to think of it, you could make us a mini SUN 'n FUN or a mini EAA Airventure Oshkosh with all your models lined up in the parking lot.
That would be cool, but daunting ;)
Brian watching you has things popping into my mind. You like to say foam to protect the foam,
why not foam to protect the fingers? Use some of the foam pack to wrap the prop blade that
you are going to grab hold of.
That's a thought ;)
You should do a review on the avios spitfire from hobby king. Brilliant plane. Comes ready to fly with all electrical. Only needs battery transmitter and reciever
Not sure the one you're talking about has the Rx in it???
This one - bit.ly/30faWzq
GORGEOUS 😂😂🤣🤘
Absolutely!
I was just wondering what to do for the next 3:15:21. Thanks BP. Which do you prefer this or the new Eflite T28 Trojan?
Well, to be fair, this plane, as configured it almost 1.5 times as much, but it's a lot more feature packed with flaps and retracts, and the AR631 is amazing too...BUT the 1.1m T-28 Trojan is VERY good. I hate to tell you this, but If there were a fire in the house, (After the kids of course), I'd grab BOTH - LOL
T28 1.1m bit.ly/38n1dvD
+
PC-21 1.1m bit.ly/3bCrHKg + AR631 bit.ly/3pYNC3c
= David Happy ;)
Do you have any video where if you activate the safe mode in this type of receivers, thanks
I haven't yet, but I may have to do it when I unbox and setup our new NX8. I don't mean to be dismissive here, but I just don't use it. I believe you can do it with just about 5 minutes more worth of steps, it's pretty easy in FORWARD PROGRAMMING....BUT you're right, we need to set that up, especially on a plane like this that SAFE would make sense in. This plane is ROCK SOLID, and I'd very highly reccmend it!
Tenho um modelo desse!!! Muito top!!
Nice!!!
Nice plane.. looks like EDF
I know! I was thinking the same thing the other night when I flew her off camera for 4 amazing - near perfect flight - SOOOOOO GOOOOOOD! We're gonna get a "Second Thoughts" flight up asap ;)
I would love to see the Freewing A-6 Intruder. I want to buy one even though I am no where good enough to fly it, but I love the A-6
I want one too, but MotionRC doesn't want to work with me ;(..... That plane looks AMAZING!
Now that’s a pretty plane! Just to think I always skimmed over this gem! What kind of connecter does it have I saw you just slap in a smart pack so I’m interested
XT60, but you can cram an IC3 in there is you want.
@@BrianPhillipsRC well ain’t that neat!
I'm bad about asking questions three years later I forget to look at the dates it was streamed sorry air Marshall crashed his plane like this one awsome vidio
Crashing plane is a part of the fun ;)
what camera do you use for filming its really good
Galaxy S9 Cell Phone as of late - LOL ;)
Nice. Can you do a video in the future showing the AR631 is only fly by telemetry (vs full range on like the AR637T/A)? Like have camera crew record the telemetry on the transmitter while you fly far and close to see what happens when it’s out of range. Just to show how far out “fly by” really goes.
I don't understand what you're asking.
@@BrianPhillipsRC spectrum has two types of telemetry: fly-by and full range. I assume fly-by only works (transmitter picks ups the data) when you “fly by”/fly near yourself vs full range which as the name implies, reaches as long as tx and rx are connected. Haven’t seen anyone do a comparison of these two differently ranged telemetries. Don’t see anything from spectrum indicating fly-by real range.
Can you please do a second thoughts on the 1.5 turbo timber really like to see another vid on that plane deciding whether or not to buy that one👍🏼
I will do that for you, but not sure of the timing on the release. We just filmed a bunch of "second thoughts" videos today, but you're 100% right, we need to do another Turbo Timber 1.5m second thoughts
Awesome look forward to it thanks love your videos!!!
How to get I one from Bangladesh?
it warns you its turning off. just like the old spektrum, theres as delay before it fully turns off.. for safety. you can turn it back on and it wont disconnect if you do so before the beeps end
The NX6?
@@BrianPhillipsRC dx. i guess its more of an issue with a slider switch.
Hey I Made It, I've Been Busy Makin Money In The Stock Market...🤑 Nice Plane & She's Quick + A Great Soundin Screamer! LOL Thanks
What's making you money - please do share ;) All my stuff is flat, BUT I prefer large bumps...lol.
@@BrianPhillipsRC Yeah, Nice Firm Ones! 😜
You need to try the FMS Extra 330 2000mm
I just did the Extra 300 ;)
How is the servo and other equipment quality of FMS planes? Dynam for example makes some great airframes but have a reputation of substandard electronics that fail too often. I assume FMS is pretty good but dunno.
I have had 3 FMS planes and only had one issue. The nose steering servo was glued into my Yak 130. That CA glue got into the gear case of the servo, so it didn't work. I asked for a replacement servo and they just sent me a new plane. FMS guarantees their planes to work out of the box (after obvious assembly). They are really good.
I have had many FMS planes I think they are top notch . FMS / Eflight is the way to go
I wouldn't say they use substandard anything. In fact, I'd say they have some of the best sizing and quality parts I've see, second only to Eflite planes, of which I've even had some DOA...very few and far between, but even the best MFG in RC are going to have issues from time to time. I measure the quality of RC products partly by if the MFG or Distributor backs them up when they DO have issues.
Chucky - Agreed - they back stuff up nicely. Mark of a good company.
Mike - Yep, for sure! Not the cheapest, but you know you're getting into something solid. Definitely NOT "project planes" ;)
Brian, I have not used Hot glue before will it melt foam?
It can, but if it's thick, you can get away with some. The hot clue will stay HOT for a while, so be careful when you use it...and make sure you don't try to glue a wing into a pocket, since the foam will seal it off and cause it to stay hot for a LONG time, then you can end up with a gap around the glue. You'll notice, I was gluing around the edge of the Rx, in this build, so this works well.
You also need to keep in mind, it's heavy.
It's definitely doable, but just keep it as light as you can to get the job done, and don't "Trap" the glue and you'll be good!
@@BrianPhillipsRC Thanks Brian, you and your camera crew do an outstanding job! I always look forward to your plane video's
I met a young pilot last week. He has one of these, but is kinda lukewarm on it. Thinks it sort of slow. Slow or scale????? your thoughts?
I LOVE this plane, and it's speedy! I wonder if he's using a weak pack??? I bet if a guy wanted to pep it up, just swap out the 5 blade prop, and you'd be going twice the speed in no time (well, maybe 1/3 faster???)
@@BrianPhillipsRC Thanks.
why not get the nx10 rather then the nx8?
If you have the money get the NX10 obviously more channels , hall affect gimbals , way longer battery life , nice magnetic charger , neck trap and bragging rights at the field .
@@Mike-hr5ng plus a lot pre loaded airplane models on the radio. I got mine a few weeks ago. Great radio
I want the NX10, but I need to share what's the BEST deal for people ;) The NX6 is amazing, and will do 95% of what everyone "needs" while the NX8 will do the other 4%...or 99% of the average RC enthusiast will need, while the NX10 is just awesome... Keep in mind, I currently have a DX18 sitting there looking pretty... I want to show what people will use, unless HH decided to send me an iX20 ;) Then screw all that talk - I'll be using it from now on - LOL!!!
Stop rubbing it in Mike - LOL ;)
@Garage928 - you too - LOL ;)
could you do the fms beaver 2000
Planning on it, as soon as it's back available.
You should get a trainer let the camera crews Fly it 😁
She doesn't want to fly, so probably not gonna happen ;(
Been flying mine for 3 years now, where you been?
Busy with other planes, but wish I would have had it before now - it is phenomenal!
Is that nose wheel plastic or metal? It looks pretty flimsy.
Metal with plastic details (similar to other FMS models). I wouldn't describe it as flimsy, but I would describe it as SHORT...and beautiful ;)
Can you do some more airliner vids
I want to do some more, but not sure when. We'll try to get some more in the near future.
3 1/4 hours and it's not even a Dynam.😂 Informative with corrections. In a few more weeks you will have too many comments to reply to....good problem to have.
I have been there a few weeks - after about 3-4 hours of replying, it gets a bit old, but I know that so many just want to make that quick kind remark, and others have legit questions that I CAN help with, so like you said - great problem to have ;)
Does this have reflex installed?
According to the FMS website, this one does come with a Reflex... bprc.me/FMS_PC21_Pilatus
That's the only info we have to go on. If it's a deal breaker for you one way or the other, I'd reach out to FMS directly.
@@BrianPhillipsRC thanks man
Which states you are living, very nice 👍😷👍😷👍
Iowa, USA
Thanks man! Nice place!👍👍👍
First one baby!!!!!!🤘🤘🤘🤘
Congrats Samuel!
DO you ms using
your 18 nice RADIO
Honestly, I kinda don't. It's an AMAZING transmitter, but the NX6 has been EXCELLENT!!! I could do a few more bells and whistles with the DX18, but the same is true with the NX8 and NX10...
@@BrianPhillipsRC I bought the NX10 love it
I assume you want a real airplane, what kind do you want
I have a real plane, but want to fly ultra-lights soon. I'm not licensed, and not necessarially in a spot to be able to do it now...so Ultra Light will be my next plan.
Yeah, i love this plane, ive had mine for about a year now, and i only flew it once, so far i love it, and it flies really good. I'd love to see what you do with it. This plane flies just as good without AS3X as it does with it. Apparently the cg can be moved to 112mm behind the leading edge, According to this rcgroups page. www.rcgroups.com/forums/showthread.php?2700509-FMS-1100mm-Pilatus-PC-21/page20
Yeah, I bet it can, but I bet it would drag the tail strike really easy on rotation.
@@BrianPhillipsRC Probably. I havent tried it yet, so I dont know what to expect.
Fms sono porcaria e -flite e molto migliore