ps3 super slim shuts off by itself - fix -
Vložit
- čas přidán 25. 11. 2022
- ps3 super slim
ps3 turns off immediately after turning on
ps3
ps3 repair
ps3 super slim liga e desliga
ps3 shuts off after turning on,
ps3 shuts off randomly,
ps3 shuts off immediately,
ps3 shuts off by itself,
ps3 turns off after 3 seconds,
ps3 turns off after turning on,
ps3 turns on and shuts off,
ps3 controller turns off by itself,
ps3 super slim shuts off by itself fix,
ps3 slim turns off by itself,
why ps3 turn off by itself,
ps3 shuts down immediately after turning on,
ps3 turns off immediately after turning on,
ps3 problem turns off itself,
ps3 fat turns off immediately after turning on,
ps3 slim turns off immediately,
ps3 super slim shuts off immediately,
ps3 starts and shuts off immediately,
ps3 powers on then shuts off,
ps3 switches off immediately,
ps3 auto turn off problem,
ps3 slim shuts off,
ps3 starts then shuts off,
why does my ps3 keep turning off,
my ps3 keeps turning off,
ps3 switches on then off
can you tell me , when using reflow what tempreature should i maintain for rework station
Thank you for sharing. How long will this last? Would it have been better to reflow using your excellent BGA rework station?
How long will this last, not sure but still testing it, and it is stable, It was turning itself on sometimes so I do not need reflow on the BGA machine?
@@idreestech can this work on the PS4 as well ?
Very nice 👌 👍 bhai
Kaash aap india se hote
To me aap se jaroor milta or kuch shikta bhi aap se hardware me....
Love you bade bhai ❤️ ♥️ 1 number
Hi.
Do you know if LAN IC and bt/wifi card share the same power supply? (regulator)
I have a super slim that has both wifi/controller and LAN intermittent problems.
Sometimes the LAN works, sometimes the controller can connect wirelessly.
Most of the times when I try to change something in the internet connection settings, the whole console freezes.
Thank you.
love your work
Glad you enjoy it!
how TO HOT gun teprejar and AIR SET
Great video. Master what is the name of tool you use for measuring resistance, and how can I differently the fake and original ones
All are with the same circuitry. Its name is SMD component tester.
Master the core A gaming video is up and your in it😊😊😊
Link?
@@idreestech czcams.com/video/l2SQgjYmVYY/video.html
I have question, sir,, about what brand name of thermal paste can be use? Or any recommend?
Arctic Silver MX4 the best.
We are missing your videos and obviously you as well lol.
Where do you get the 2 heat sinks is it costom made
The two heat sinks are the part of two old scrapped GPU cards.
Thanks a lot for your interesting video. I kindly ask you if you can tell with video to see for a ps3 super slim where you tell about all resistors that is showed into this video at 02:32 (the one on the left of Blu-ray connector). In this video you test only some of the resistors but on my console I discovered a shorted one on the bottom and I need to know the correct value
Thanks in advance to everyone who can help me
The resistance could not be short. May be its value is as it shows.
Could you repair my ps3 super slim. It does the exact same thing I just don't have any tools to repair I've tooken it apart just don't know the problem
Why not?
How can I send it to you
If using a copper plate to put it to push it tighter, can you?
Dear, the question is not straightforward.
It can cause a short circuit, so it should be of a non-conducting material.
Tell me about the pre heat temprature sir and how to find cpu on my slim ps3
380 degrees and a half of the total air or medium airflow. The RAM attached to the chip is a CPU.
@@idreestech thanks
@@legendforever7036 UWC.
@@idreestechthanks so much again sir
master.selamun aleyküm, how many minutes should we apply the hot air gun to the chip at 380 degrees Celsius. What should be the average time. When we use the preheating plate, what should be the preheating degree of the lower plate. And how many minutes should it warm up. Then I will continue to heat it with a hot air gun from the top. Let me keep the temperature. I have a temperature measurement probe. At what degree does the CPU temperature reach fluidity again.Thanks
Dear, never use the Hot Air Gun for this purpose. It is dangerous for a PCB to heat a specific area. First, preheat the whole motherboard at the same temperature for about 10 minutes. then try a reflow of the specific chip.
@@idreestech thanks sir.
@@idreestech What is the appropriate temperature for pre heating ?
380 Degrees
how many temp for preheat, and temp when reflowing the cpu and gpu?
Preheat the set to 180 degrees Celsius, with the upper heating element set to 230 degrees Celsius and the lower heating element set to 240 degrees Celsius.
@@idreestech thank you
Sr mein bilal kasur wala mera playstion 3 repair kiya hai ke nahi ager nahi tu mera playstion wapis kardo aur apka no q band ja raha hai please reply my massage.
Soon now, dear, I have started working again.
thanks for sharing
what is this chip called in 2:24 ?
or it's name plz
Please google it with the said chip number.
@@idreestech
i think you didn't say the number
and it's number is not visible on the camera
@@ubtech2938 Please join me on Facebook.
When will you repair my PS3 slim 500gb from Karachi
Soon now, dear, I have started working again.
was that 210 degrees F or C?
380 degree
Well done mr idress
can you do a vedio on how to test ps4 & ps3 Processor with multymeter on diode mode ❤
Ok
@@idreestech
thank you so much teacher . god bless you
big respect from iraq 🇵🇰❤🇮🇶
Khair howe ne.
Hello,
Thanks the video!
What is this: 9:10?
It is the Flux paste that helps in a reflow process.
Thank you so much!!
I try this method (without flux paste),but not good.Same problem..
I buy this paste.
Thank you!!
Interesting video
Glad you think so!
Sr your number is off what's proplam the
reball with hands is possible.👍
Yes possible, but it took so much time.
Is it possible to send it to you? Because I've tried everything and its still giving me issues.
Yes, please feel free to send it to me.
@@idreestech Nice! So how much Is it gonna cost me?
Or can I send you the details about what is happening with it?
@@Tinny-ji6uh Country you belong?
@@idreestech South Africa
heat gun temp ?
380 degrees.
@@idreestech air flow setting on blower please both on 210C &380 C please
I am also facing the same problem wit my ps3
Good luck!
nice
Thanks
Same problem in my ps3 super slim but i live in pakistan not any type electronics master
Dear! I am in your native country.
Excellent!
Many thanks!