Justin as a welder of over 50 years I want to say you are a very good explainer of what you are doing and what to do. IMO you would make a great instructor.
Best channel on welding, explains things very well for newbies like me. I am going through restoration process of an old valve resurfacing machine Kwik-Way model P from 1930ies era, its all made from cast iron and there are several delicate pieces broken, also several cracks in oil collector pan etc.. Will try TIG braze it back to life. Thanks for the educational videos.
Thank you. You do a great job explaining the process. I took a welding class and you explained things better than my instructor. I am grateful that you share your knowledge and experience. Thank you!!
I have yet to get Aluminum Bronze to flow how I like it, thanks for the demo. I have a customer that brings me 3 or 4 toyota 22R pick up turbo manifolds a year that all crack in the same location. For those I do the same prep with much more pre-heat and use Nickel 99 stick rod with the flux cleaned off with a wire wheel and TIG it on AC just the same. When finished they look surprisingly good, similar to TIGed steel and they never come back. Thank you again for the great content.
Hey young man, like someone else posted, I've got a few years and knowledge behind me in this trade, and I appreciate your approach and attitude towards this one. After 45+ years under my belt, I learned something from you! Aluminum VS. Bronze.... Thank you for sharing, I too think you would make a very good instructor! Cheers, Razor!
Normally I use dc for this, next time I will try the ac settings, thanks. For me dipping my rod in borax powder makes the bronze flow even better and makes the dirt flow on top of instead of in the bronze.
Very educational. The exhaust manifold on my 4cyl Tacoma cracked 20 years ago and I had the local ag welding shop try to fix it rather than buying a new one. I think they braised it, but can't remember after all these years. It lasted about 25 miles before cracking again. After a brand new manifold also cracked, I replaced it with a stainless header that also boosted my torque a little.
Yep, gna have to get a pound of that stuff. Also thinking about trading my Everlast 210EXT out for that HTP 221. Good idea? (I want a better, more controllable AC arc, and spot timer) seems that HTP gets better reviews than the everlast 350ext, already got basic Dynasty 280 for high amps
Good explanation on how and why this technique works so well. While it works well on old and dirty cast, it works even better on new and clean material. With the right conditions, it can have a bright polished gold look.
Very informative video!...I've done a fair amount of Silicon Bronze but knew nothing about Aluminum Bronze. BTW It never occurred to me to ding you because the repair "didn't look good"..Thanks for another great vid!
Yes, I get the bevel. Everyone says to preheat cast iron, but I never do. I heat it as I go. I use pure argon and slow down the wire feed speed so I can "ball" it and dip it. Works great with aluminum bronze and silicon bronze as well. Never had one break near the weld. Ever. Argon or helium only( if you're rich) and slow heat up. Also, it wets so well, I never clean up, lol.
I've made similar repairs on cast iron but used a bit of a different method to prepare, before grinding along the crack drill a series of 3/16 holes along the crack without breaking through, now after grinding you will have a much larger clean purchase to put the bronze in place, not only does it provide more adhesion but also gives a greater amount of bronze joint width to give a less rigid seam reducing the chance of another crack developing.
I found that pure copper is best for repairing cast iron, discovered this when I had the job of repairing 150 year old Victorian cast iron ram pumps for a client. The cast was so full of carbon and other inclusions that I was having trouble with both Aluminium and Silicon bronze filler I had some 99.9% pure copper filler from another job so I tried that and it just flowed straight in.
I weld and braze with alu bronze pretty often, and have found that it works best for me at about 80% EN, a little more than you were using. And the A2 alloy works better than the other alloy. (Just trying to help)
I did a little bit of bronze brazing when I was down in Mississippi at the Seabee training center down there. It’s definitely a wild thing to use and try to get used to.
Well explained , Well Done ! Push/ scrub rod into weld pool and try to keep arc on the wire / weld puddle . Similar to gas brazing, flux will also help.
Great !!... I have done it with a stick welder about 100 times.... I am going to do my next block or manifold this way and see what I get. Thanks for the great video.
Justin your a great Teacher. Have you ever Tried Half argon & half Helium. Talk about a Wet & flowing Puddle. the extra heat is amazing. It also works Very well on all Copper.
This is interesting, I've never thought about using aluminum bronze and a tig. I've always heated my cast in an oven, welded it with a nickle rod and then stuck it back in the oven to cool slowly. I'm gonna have to try this.
Justin..have used this material on lots of cast iron...anzing how strong it is if done correctly....thanks for sharing this great tech to the world...best regards...Paul
This is going on a manifold. What is the typical operating temperature of this? The service temperature of brazing alloys is under 500F. Copper and copper-zinc filler metals are generally used on ferrous metals. They can also be used on many nonferrous metals. The upper service temperature for these alloys is 400°F (200°C)
I had the same kind of crack on a Geo Storm. Grooved and drilled it just as you did. Preheated it on the grill. Tig welded the crack. Lasted some 7 years until a teenager Tboned it.
great video I have some welding experience but mostly stick and gas so learning all the time. Three suggestions for the repair unrelated to the brazing directly, 1 if you have an ultrasonic cleaner in the shop it will get your crack cleaner, 2 I noticed you preheated the general crack area with the propane a more thorough preheat and a post heat will help reduce re occurrence, 3 while you have the burr out clean all the casting dags off as this will also help stresses travel through the casting and reduce the chance of more cracking, probably irrelevant because I see a set of custom headers in its future, or an ls3 cheers for the great video and explanations
Good video , I had a 1995 mighty Max , fun little truck to drive , miss it but it spun a bearing and didn't have time to fix it so had to get rid of it .
Keep trying you will get there. Get as clean as you can possibly get it. I personally can do a better job with oxy acetaline. Seem to be able to control the heat better. I still use Tig on occasion. I really need to use the Tig more on this type of repair just to improve the Tig skill. Not everyone wants to mess with cast repairs. After welding I put repaired part in a bucket of sand for slower cooling.
@@garytodd5605 good advice and if someone is looking for help brazing I'd recommend Keith Fenner's videos. He is the is the CZcams brazing king and really dialed his camera in to get some great shots. He did a hub repair series that had some great information on it.
I brazed Manifold one time and found out the hard way that it does not work, and that I did with a torch, I’m just wondering if the bronze part of your filler rod presented any issues? If I have the chance I’m going to try it for my self, it does look very promising, thanks for the information.
Really well done - THANKS! EDIT from below -- Is aluminum bronze good for cast iron to under 1/4 inch thick steel? Great instructions following the Key Rule: You have anticipated and answered ALL of the inevitable questions, VERY well. Thanks again - you saved me a bunch of time.
Cool stuff ....l have to weld a flywheel/ pulley.... Thick Cast iron part does not get hot ....l have silicon bronze in the workshop.... Or should l buy Alum Bronze??? Precision Panel Craft.
Easy to follow lesson and presenting reasons why you did what you did. Question about the finishing the braze. I guess if one were doing it for "show" it should be ground down, cleaned up, etc. But if it was wholly for repair could you have left it as finished after the 1st pass braze. Or should a 2nd pass be made to blend it in more?
Thank you for saying silicon bronze in the video. The whole time I was watching I was trying to think of that name. my brain was going magnesium bronze no, titanium bronze no, those probably don't exist but I was just trying to think of it. Do you think this stuff is good enough to attach steel pipes to a cast iron exhaust manifold that will be used for a turbo ? I know its strong enough but will a turbo manifold get hot enough to melt it. I guess i could just look up the melting points and then guestimate how hot the exhaust should get.
Hey Justin, quick question for a newbie TIG welder. Can you bond steel to cast iron, such as a steel manifold bolt to the manifold? Thanks for any help you can give!
Have you ever done any work with a "Cobra" oxy/act torch? I have seen guys weld aluminum with one they seem to work pretty good, there good for making dry sump oil tanks because it anneals the weld as it goes so they don't crack as bad.
Hi I’ve never been taught how to weld professionally my dad just turned me loose when I was young I’ve welded cast with a gas torch and silicone bronze and had it stick well do you ever fix any cast with the gas torch and if u do I was wondering if you had a video on it so I might learn proper thank you for your time and everything
Nice vid but minor nit. This is a demonstration of braze welding which is not the same as brazing. You applied the arc directly to the filler metal. If you brazed you would heat the target and the filler metal would melt on contact and flow in via capillary action. It is not possible to braze with an arc because you need to generate large heated area.
Every time I try and TIG braze with aluminum-bronze, I get a little blow out with this green-blue flame which is, I think, the zinc coming out of the alloy. I have no problems TIG brazing with silicon-bronze what so ever. Any idea what I may be doing wrong ?? --Doozer
Awesome stuff, I have a cast iron block from a 2005 new Holland tractor ,broke on lower corner ,leaking oil through it,the corner of the baseban supports it,I just paid a hold lot for tractors put 5rs on it and now this,roughly a 5 inch crack that goes off on each end to the base pan.any suggestions ,braze it or JB weld
love the explanation, genius me tried this once on my grandpa`s 55 fordson thames, but used bronze filler meant for gas welding (it has zinc in it i think?) lets just say that didnt go so well...
If the manifold had a hole in it, say the size of a silver dollar, would you fill the hole by running beads around the perimeter until the hole was filled, or could you use a piece of mild steel to fill the hole, and then use the aluminum bronze to secure it? And, in your opinion, would either of these choices be a long term successful repair?
Thank you for explaining why you used aluminum-bronze over silicone-bronze. That said-isn’t it possible to use AC with silicone bronze or is there a reason that would be taboo?
I've only oxy-acetylene brazed, with flux - while you don't need it for preventing oxidation reactions, wouldn't the use of flux aid the cleaning/floating out action on remaining contaminants in the crack?
great vid, but could you show how to weld cast iron? i have been told that it can be done by pre heating the cast iron, then using mig process with er70 s6 in very short stretches no longer than one inch at a time then pern the crap out of it, wait for part to cool then repeat i have not welded cast iron only read about it, so i an interested.
Thanks for the videos! Have you tried 312 stainless filler for cast ever? I’ve had decent luck on pump casings with it. I do use sib and aluminum bronze as well.
Wire brush is not enough, use a flapper. That will help with the carbon grunge. I agree with looks and sometimes you just have to repair the problem. That's also why they make grinders. Tell the naysayers, pretend you just went out and bought a repaired one. Grind on that!
Everytime i try tig brazing i have mini explosions happen. With or without gas, heat parent equal to filler or focusing on filler doesnt matter what i try. Ive tried the type with white flux and bare type. What am i doing wrong?
First of all, love the videos. You have taught me quite a bit about welding and I appreciate it greatly. My question, would it be a bad idea to drill a few more small holes at angles to essentially give the brazing rod more places to bite into and hold onto the cast iron, or is that completely unnecessary? I'd suppose if this had a turbo it might be more important for it to have a stronger hold on the base metal. Just a question that popped into my head while watching this. Looking forward to more videos of your mighty max! I'm the same way with the OBS Fords... Although after working on one for a while, I completely understand some folks hate for Ford lol. They just had very little clerical skills, or common decency with their building methodology 😅. Thanks again! Edit: just noticed this is two years old LMAO whoops! You've already taken this apart and are building a tube chassis 🤣
Few questions, I will be fixing a fairly long crack on a hit and miss engine. I won't be able to weld it flat, it'll be overhead, will that be an issue using this method? And also, do I need to be concerned about heat input and treatment? I am a welder by trade and have done cast welding before
Old vid I know - sorry for going necro. But question is - you mentioned you’re using AC I think ? So since you’re only using the torch for heat could you do this with a DC rig? Thanks.
Would aluminum bronze be good for welding (brazing whatever) something like an axle truss to an axle housing? I've seen lots of videos where people just preheat and mig mild steel straight to the casting but im not sure how much I trust their back yard fab. Would there be any advantage from one to the other?
Justin as a welder of over 50 years I want to say you are a very good explainer of what you are doing and what to do. IMO you would make a great instructor.
PS - I'm still watching - LOL
His name is Justin lmao
@@jeremymatthews5169 Changed - thanks.
Jason?
@@colebz420 I had wrote Jason first by mistake but Xzempt corrected me so I edited my comment and fixed it.
Weld looks perfectly functional. Plus props for not being afraid to post a rough one.
*braze
Best channel on welding, explains things very well for newbies like me. I am going through restoration process of an old valve resurfacing machine Kwik-Way model P from 1930ies era, its all made from cast iron and there are several delicate pieces broken, also several cracks in oil collector pan etc.. Will try TIG braze it back to life. Thanks for the educational videos.
Thank you. You do a great job explaining the process. I took a welding class and you explained things better than my instructor. I am grateful that you share your knowledge and experience. Thank you!!
Thanks. First exhaust repair I've seen done on CZcams that looks like it will last. Such a pro
I have yet to get Aluminum Bronze to flow how I like it, thanks for the demo. I have a customer that brings me 3 or 4 toyota 22R pick up turbo manifolds a year that all crack in the same location. For those I do the same prep with much more pre-heat and use Nickel 99 stick rod with the flux cleaned off with a wire wheel and TIG it on AC just the same. When finished they look surprisingly good, similar to TIGed steel and they never come back.
Thank you again for the great content.
Hey young man, like someone else posted, I've got a few years and knowledge behind me in this trade, and I appreciate your approach and attitude towards this one. After 45+ years under my belt, I learned something from you! Aluminum VS. Bronze....
Thank you for sharing, I too think you would make a very good instructor!
Cheers,
Razor!
Normally I use dc for this, next time I will try the ac settings, thanks.
For me dipping my rod in borax powder makes the bronze flow even better and makes the dirt flow on top of instead of in the bronze.
Very educational. The exhaust manifold on my 4cyl Tacoma cracked 20 years ago and I had the local ag welding shop try to fix it rather than buying a new one. I think they braised it, but can't remember after all these years. It lasted about 25 miles before cracking again. After a brand new manifold also cracked, I replaced it with a stainless header that also boosted my torque a little.
Nice work Justin, I am going to have to try aluminum bronze, I have only used silicon bronze.
Gibe it a go! I like it more than silicon bronze at the end of the day. The "gold" is 10x more lustrous (and it's a bit stronger).
Yep, gna have to get a pound of that stuff. Also thinking about trading my Everlast 210EXT out for that HTP 221. Good idea? (I want a better, more controllable AC arc, and spot timer) seems that HTP gets better reviews than the everlast 350ext, already got basic Dynasty 280 for high amps
People say I'm verbose sometimes. But at least when I explain something I leave them without understanding. Good job taking the time to explain.
Nice Job and instruction Justin. Bravo.
Good explanation on how and why this technique works so well. While it works well on old and dirty cast, it works even better on new and clean material. With the right conditions, it can have a bright polished gold look.
I love your voice on the voice over! Subscribed, and now I'm going on a trip through the old video
I Love the way you groove the crack, an old school deep weld that will hold to more surface area.
Thank you again!!! Thanks for all the explanations of the whys for your decisions on this weld. Awesome!!
Very informative video!...I've done a fair amount of Silicon Bronze but knew nothing about Aluminum Bronze. BTW It never occurred to me to ding you because the repair "didn't look good"..Thanks for another great vid!
Yes, I get the bevel. Everyone says to preheat cast iron, but I never do. I heat it as I go. I use pure argon and slow down the wire feed speed so I can "ball" it and dip it. Works great with aluminum bronze and silicon bronze as well. Never had one break near the weld. Ever. Argon or helium only( if you're rich) and slow heat up. Also, it wets so well, I never clean up, lol.
Good video! I have used silicon bronze for this type of repair as well.
Great explanation of this technique.
I've made similar repairs on cast iron but used a bit of a different method to prepare, before grinding along the crack drill a series of 3/16 holes along the crack without breaking through, now after grinding you will have a much larger clean purchase to put the bronze in place, not only does it provide more adhesion but also gives a greater amount of bronze joint width to give a less rigid seam reducing the chance of another crack developing.
I found that pure copper is best for repairing cast iron, discovered this when I had the job of repairing 150 year old Victorian cast iron ram pumps for a client. The cast was so full of carbon and other inclusions that I was having trouble with both Aluminium and Silicon bronze filler I had some 99.9% pure copper filler from another job so I tried that and it just flowed straight in.
Will try that also, Tx
I weld and braze with alu bronze pretty often, and have found that it works best for me at about 80% EN, a little more than you were using. And the A2 alloy works better than the other alloy. (Just trying to help)
I did a little bit of bronze brazing when I was down in Mississippi at the Seabee training center down there. It’s definitely a wild thing to use and try to get used to.
Well explained , Well Done ! Push/ scrub rod into weld pool and try to keep arc on the wire / weld puddle . Similar to gas brazing, flux will also help.
Great !!... I have done it with a stick welder about 100 times.... I am going to do my next block or manifold this way and see what I get. Thanks for the great video.
Great review, but need to stipulate the need for Argon. thanks again!
Justin your a great Teacher. Have you ever Tried Half argon & half Helium. Talk about a Wet & flowing Puddle. the extra heat is amazing. It also works Very well on all Copper.
This is interesting, I've never thought about using aluminum bronze and a tig. I've always heated my cast in an oven, welded it with a nickle rod and then stuck it back in the oven to cool slowly. I'm gonna have to try this.
That is the way I was always told to do it, just and tack.
Justin..have used this material on lots of cast iron...anzing how strong it is if done correctly....thanks for sharing this great tech to the world...best regards...Paul
This is going on a manifold. What is the typical operating temperature of this? The service temperature of brazing alloys is under 500F. Copper and copper-zinc filler metals are generally used on ferrous metals. They can also be used on many nonferrous metals. The upper service temperature for these alloys is 400°F (200°C)
I still enjoy welding cast with the old torch and brazing rod
I had the same kind of crack on a Geo Storm. Grooved and drilled it just as you did. Preheated it on the grill. Tig welded the crack. Lasted some 7 years until a teenager Tboned it.
I had 3 of those trucks. A 90 2.4 with a home brew supercharger, a Carby 87 2.0 and a Carby 88 long bed D-50. Miss em.
great video I have some welding experience but mostly stick and gas so learning all the time. Three suggestions for the repair unrelated to the brazing directly, 1 if you have an ultrasonic cleaner in the shop it will get your crack cleaner, 2 I noticed you preheated the general crack area with the propane a more thorough preheat and a post heat will help reduce re occurrence, 3 while you have the burr out clean all the casting dags off as this will also help stresses travel through the casting and reduce the chance of more cracking, probably irrelevant because I see a set of custom headers in its future, or an ls3 cheers for the great video and explanations
Good video , I had a 1995 mighty Max , fun little truck to drive , miss it but it spun a bearing and didn't have time to fix it so had to get rid of it .
I always watch til the end. Got to make sure I don’t miss anything haha
Used some today repairing jaws to an adjustable wrench! I’m impressed with how strong it actually.
one of the things i did not see what is the argon flow setting?
and well done!
Real world situations, I dig it. And I like the mighty max. Time for a 4g swap video lol
Fantastic, nae scary . Had Aluminium Bronze rods for a while now but you have helped me understand some of their advantages in a really easy manner.
I can't wait to see what you have in mind for the truck!
Great to see Cast Iron Welding. I've never had good luck with welding cast iron.
Lots of ways to skin a cat this cat just takes lots of prep work and steps
This is more brazing than welding,but I've found it's one of the best ways to repair cast iron when you can't use stitch n lock.
Keep trying you will get there. Get as clean as you can possibly get it. I personally can do a better job with oxy acetaline. Seem to be able to control the heat better. I still use Tig on occasion. I really need to use the Tig more on this type of repair just to improve the Tig skill. Not everyone wants to mess with cast repairs. After welding I put repaired part in a bucket of sand for slower cooling.
@@garytodd5605 good advice and if someone is looking for help brazing I'd recommend Keith Fenner's videos. He is the is the CZcams brazing king and really dialed his camera in to get some great shots. He did a hub repair series that had some great information on it.
I brazed Manifold one time and found out the hard way that it does not work, and that I did with a torch, I’m just wondering if the bronze part of your filler rod presented any issues?
If I have the chance I’m going to try it for my self, it does look very promising, thanks for the information.
Sweet video Justin! I was wondering the difference in bronzes! Thanks man 👊
Pretty neat stuff just did a cast iron manifold! I will have to try out aluminum bronze!
Fighting Fire with Fire is an Aussie move. 👍👍
Great video, thanks for the STRAIGHT FORWARD TRUTH👍👍
You think like I do, great video and solid repair.
You should have.... But if you.... You could have..... But I can..... You should have!!!!!!!!! Awesome Job Man thanks for sharing!
Once again thank you for taking the time to show us looks very good
Really well done - THANKS!
EDIT from below -- Is aluminum bronze good for cast iron to under 1/4 inch thick steel?
Great instructions following the Key Rule: You have anticipated and answered ALL of the inevitable questions, VERY well. Thanks again - you saved me a bunch of time.
Cool stuff ....l have to weld a flywheel/ pulley.... Thick Cast iron part does not get hot ....l have silicon bronze in the workshop.... Or should l buy Alum Bronze???
Precision Panel Craft.
Another premium video !!! - Light-bulb moment for me Thanks HUGE!!!
I just started TIG welding...like 3 hours worth!😂😂😂👍🏻Love the vids! You helped me make my decision to buy a AHP 200!🤘🏻🤘🏻🤘🏻
Thank you very informative. Never Al bronze but going to try it
Easy to follow lesson and presenting reasons why you did what you did. Question about the finishing the braze. I guess if one were doing it for "show" it should be ground down, cleaned up, etc. But if it was wholly for repair could you have left it as finished after the 1st pass braze. Or should a 2nd pass be made to blend it in more?
Thank you for saying silicon bronze in the video. The whole time I was watching I was trying to think of that name. my brain was going magnesium bronze no, titanium bronze no, those probably don't exist but I was just trying to think of it. Do you think this stuff is good enough to attach steel pipes to a cast iron exhaust manifold that will be used for a turbo ? I know its strong enough but will a turbo manifold get hot enough to melt it. I guess i could just look up the melting points and then guestimate how hot the exhaust should get.
Hey Justin, quick question for a newbie TIG welder. Can you bond steel to cast iron, such as a steel manifold bolt to the manifold? Thanks for any help you can give!
Awesome. If someone has a question, where can they send it? Thanks
Awesome vid man. Can't wait to see what else is in store for the truck😉.
Thanks bro...for explaining that really helped me out a lot
Nice job👍🏾
Can you do a stainless steel to cast iron tig video? I've been seeing guys weld v-bands to the hot side of turbos for external waste gates.
Thanks.
Liked for the brazing, followed for the FIGHT FIRE WITH FIRE wisdom hahaha
Have you ever done any work with a "Cobra" oxy/act torch? I have seen guys weld aluminum with one they seem to work pretty good, there good for making dry sump oil tanks because it anneals the weld as it goes so they don't crack as bad.
Love it great welding can’t wait to see what you do with the project. Keep up the great work
Hi I’ve never been taught how to weld professionally my dad just turned me loose when I was young I’ve welded cast with a gas torch and silicone bronze and had it stick well do you ever fix any cast with the gas torch and if u do I was wondering if you had a video on it so I might learn proper thank you for your time and everything
Thank you for demystifying this - great video.
Nice vid but minor nit. This is a demonstration of braze welding which is not the same as brazing. You applied the arc directly to the filler metal. If you brazed you would heat the target and the filler metal would melt on contact and flow in via capillary action. It is not possible to braze with an arc because you need to generate large heated area.
Every time I try and TIG braze with aluminum-bronze, I get a little blow out with this green-blue flame which is, I think, the zinc coming out of the alloy. I have no problems TIG brazing with silicon-bronze what so ever. Any idea what I may be doing wrong ?? --Doozer
Big project without name? It's got to be "Mitsubig'a'project"..haha. Thanks for good advice about al.bronze.
It's beautiful!
Thanks for another great video with great info
Awesome stuff, I have a cast iron block from a 2005 new Holland tractor ,broke on lower corner ,leaking oil through it,the corner of the baseban supports it,I just paid a hold lot for tractors put 5rs on it and now this,roughly a 5 inch crack that goes off on each end to the base pan.any suggestions ,braze it or JB weld
Ithiz goud edeya your the best
love the explanation, genius me tried this once on my grandpa`s 55 fordson thames, but used bronze filler meant for gas welding (it has zinc in it i think?) lets just say that didnt go so well...
If the manifold had a hole in it, say the size of a silver dollar, would you fill the hole by running beads around the perimeter until the hole was filled, or could you use a piece of mild steel to fill the hole, and then use the aluminum bronze to secure it? And, in your opinion, would either of these choices be a long term successful repair?
Thank you for explaining why you used aluminum-bronze over silicone-bronze. That said-isn’t it possible to use AC with silicone bronze or is there a reason that would be taboo?
Wondering if this will be a good technique for repairing a vise with a missing jaw shelf. Material needed to attach to create missing piece.
Tig brazing and mig brazing - the argon takes the place of the flux that you need when you oxy fuel braze.
That would have been good info to add I reckon. Hopefully I'll remember if I revisit the topic (credit to you of course)
@@TheFabricatorSeries yep Pete know his stuff too. If you dont follow him you should.
@@mrgreenswelding2853 Where would one find him ?
@@barryhorne7052 click on Zila above that Peter Zila's channel.
I've only oxy-acetylene brazed, with flux - while you don't need it for preventing oxidation reactions, wouldn't the use of flux aid the cleaning/floating out action on remaining contaminants in the crack?
great vid, but could you show how to weld cast iron? i have been told that it can be done by pre heating the cast iron, then using mig process with er70 s6 in very short stretches no longer than one inch at a time then pern the crap out of it, wait for part to cool then repeat i have not welded cast iron only read about it, so i an interested.
Thanks for the videos! Have you tried 312 stainless filler for cast ever? I’ve had decent luck on pump casings with it. I do use sib and aluminum bronze as well.
Wire brush is not enough, use a flapper. That will help with the carbon grunge. I agree with looks and sometimes you just have to repair the problem. That's also why they make grinders. Tell the naysayers, pretend you just went out and bought a repaired one. Grind on that!
Everytime i try tig brazing i have mini explosions happen. With or without gas, heat parent equal to filler or focusing on filler doesnt matter what i try. Ive tried the type with white flux and bare type. What am i doing wrong?
First of all, love the videos. You have taught me quite a bit about welding and I appreciate it greatly. My question, would it be a bad idea to drill a few more small holes at angles to essentially give the brazing rod more places to bite into and hold onto the cast iron, or is that completely unnecessary? I'd suppose if this had a turbo it might be more important for it to have a stronger hold on the base metal. Just a question that popped into my head while watching this. Looking forward to more videos of your mighty max! I'm the same way with the OBS Fords... Although after working on one for a while, I completely understand some folks hate for Ford lol. They just had very little clerical skills, or common decency with their building methodology 😅. Thanks again!
Edit: just noticed this is two years old LMAO whoops! You've already taken this apart and are building a tube chassis 🤣
What are the (dis)advantages of stick welding for this project? I hear stick welding is often preferred for cast iron.
Excellent video
Very cool. Thanks for sharing!
Spot on Justin.
Few questions, I will be fixing a fairly long crack on a hit and miss engine. I won't be able to weld it flat, it'll be overhead, will that be an issue using this method? And also, do I need to be concerned about heat input and treatment?
I am a welder by trade and have done cast welding before
Learned a new skill now
Hi Great video.What kind of tungsten did you use? Also was it pointed or balled?
Great video, how about building a tube manifold?
JUST AWESOME!! THANKS FOR SHARING!!
Nice. Thanks
I was waiting for the fire! Lol!!
Nice job too!
Great vid thanks for posting!
Old vid I know - sorry for going necro. But question is - you mentioned you’re using AC I think ? So since you’re only using the torch for heat could you do this with a DC rig? Thanks.
Would aluminum bronze be good for welding (brazing whatever) something like an axle truss to an axle housing? I've seen lots of videos where people just preheat and mig mild steel straight to the casting but im not sure how much I trust their back yard fab. Would there be any advantage from one to the other?
Thanks for the great video Justin 🍻🙏