AMD Sapphire Pulse Radeon RX 580 4GB|Cleaning,Changing Thermal Paste,Pads|Disassembly,Tear Down
Vložit
- čas přidán 14. 02. 2022
- -If you have any questions or any advices write them down in the comments!
-If you enjoyed the video a like will be apreciated!
Music • BGM | VLOG | No.12 In ...
-Intro Made By: VipexArtz
-VipexArtz`s channel: / vipexartzoriginal
-Outro Animation: • Rounded Neon Multicolo...
-See you in the next one!
-PC Specs:
-CPU: intel Core i3 10100F
-Cooler: Arctic Freezer 34 eSports DUO
-GPU: AMD Sapphire Pulse Radeon RX 580 4GB
-RAM: Patriot Viper Steel 16GB(2x8) 3000MHz (Using them at 2666MHz,because of the motherboard)
-CASE: Lian Li O11 Air Mini
-PSU: be quiet! System Power 9 500W
-MOBO: MSI H510M-A PRO
-SSD: ADATA Swordfish 250GB
-SSD: Sillicon Power A55 256GB
Perfect music choice! Thanks :)
Many thanks for this video!!!
sir, im from Philippines. do you have idea what size of Spring Screws that mount in case and back plate? is it m2*6 or m2*8?
Isopropilic alcohol is what you need for cleaning the thermal paste faster, good video, btw
This morning I opened overwatch 2 and I got an alarming 82 degress in lobby
hows the gpu now?
Thanks, i got the same GPU from a miner and it wasn't working. Cleaned it up and reapplied paste n it started working again.
Can the Radeon RX 580 take any video source IN through its HDMI or displayport ? Or are they only outputs ? Thank you
May gpu is rx580 may problem is overhear 81 to 82c
Bruh, cleaning that case just put in the water, not include fan. And dry in 1 day
I need to change the pads to an rx580 8gb sapphire, which one does it have specifically?
before and after temperature?
Sir sapphire pulse rx580 uses 0.75mm for VRam and 1.0mm for VRM right? Its hard to find 0.75mm for VRam. Did you use 0.5mm for VRam? How about VRM did you use 1.0mm?
can you share the bios? my bios corrupted
is a 1mm thermal pad too thick for this gpu?
Прокладки не на дросселя надо устанавливать, а на микросхемы DC-DC ШИМ(PWM) микросхемы!!!!
0.5 thermal pad is too thin, there will be no connection between the chip and the cooler. I recommend using 1mm from Artic. This thermal pad is softer than the original, so you don't have to worry about 1mm thickness. A comfortable squeeze will occur.
willl opening cause warranty void
What temperature is danger for this card?
:yt: