Humvee Hood and Windshield Frame Install.
Vložit
- čas přidán 25. 03. 2023
- Tons of progress made on the Humvee! We ended up getting the hood and windshield frame installed! Huge thanks to everybody helping me out to get it lifted and installed!
Music: Epidemic Sound
#hmmwv #humvee #ironplanet #diesel #duramax
Awesome, the color choices are perfect. Good to see bras32 joining... He is a heavy lifter, I remember his comment when putting the spare tire carrier on the other HUMVEE... you guys indeed are close friends.
Idk about a heavy lifter, lol!!! I show up and help every once in a while.
For sure!! Thanks
@@JimmyBraswell Those Guns wont lie bud... 💪Hope to see more arguing in coming videos, this one was awesome...
Looking good. Like I mentioned early on the build, having to use drilled out 3" chevy lift blocks, I also mentioned I got 3" square steel tubing that was 1/8' to 3/16' thick walled and drilled holes through them on my drill press and used those to mount the hood. The holes will be offset on the block. I rhino coated them and used longer grade 8 bolts to mount them in place. The wood blocks are fine for the fuel tank spacers but be sure to coat them and put rubber insulation on the side against the tank. Also, remember to put the drive shaft shield back in place on the fuel tank so if the u-joint on the drive shaft fails and it hits the fuel tank, it will not damage it. You can put shorter bolts on your windshield hinges, but I recommend the actual hinge pins with the lanyard keeper clip. You'll need 5 of them and can get them from Mac Motors, Kascar or The Hummer Parts Guy. If you decide to continue doing major Humvee rebuilds, you might want to consider buying a military aerospace cherry rivet hydraulic riveter and rivnut setter. Best tool investment I made for putting panels and parts on these trucks. I found my setup on Ebay. Good luck and looking forward to seeing the finished truck.
Work of art.. 💪🏻
MARSHALL!!! Cut a hockey puck as close to square as you can and use that for a hood spacer.. just a thought. Good luck Brother.
Lol. You should have your buddy on more often. Funny stuff. It's like that movie grumpy old men.
😆
Predator inc will have them hood blocks brother. Shes looking really really nice, proud of you for this build.
Thanks brother!
Right on man. Getting closer to the end. Can’t wait to see where it goes on it’s maiden voyage.
Me either, still I long ways to go!
You guys are legit! Marshall and Jimmy are BFFs.
Most entertaining build, yet. 🤣😂🤣😂
This is your best video to date! All the help was funny.😂 Awesome progress this round
I have 2” and 3” aluminum hood blocks available as well as new tank straps and gas tank spacers. If you need anything hit me up.
Mate when that hood went on it just looked sick, HUMVEES just have the toughest look about them, and the color is perfect.
Thanks man!
Look up Alro plastics company. They are also Alro metals. Hard plastic your looking for (spacers) is material called Delron. It comes black in color and in blocks so they will cut to your dimensions. Easy to drill thru.
Find a local Machine Shop and have them make you hood spacers from Aluminum. They'll be solid.
Thanks man
You would be able to 3d print those blocks out of nylon pretty easy.
congratulations 🎉
If someone figure out center bump which consumes whole space of passenger seats then it would be ultimate suv.
Hey guys you did amazing job great very bueno!
I follow your work since day one (Since your first HMVWE actually), It is very impressive masterpiece year of work. I can't wait to see it finish.
Thanks!
I’ve been following the build for a while. Awesome job so far! I just bought my first humvee and am starting the restoration process. I’m located in Georgia as well. Good luck with the project!
Good luck! Have fun!
Digging the matte hood, by the way.
By far one of best vlogs you posted all are great was cool you added others into the video. I also checked out your buddys fishing channel good stuff!!!!!
Thanks brother!
Nice🔥🔥🤙
It looks good. Great video!!!!!!
I love this build !
Awesome channel!! Can you use a set of 3 inch lift aluminum blocks(used between axles/leaf springs) for the hood spacers? The wood spacers look fine though.
And the trailer held up!!!
😂😂
Use a hockey puck.. they are about .99 cents and strong with a bit (minimal) flex. You just have to cut the round edges off to make them square. People have been using them for lift spacers for years.
I used hockey pucks for the other lift on my other humvee, but it’s to narrow on the spacer needs to be about 4 inches wide hockey pucks just not wide enough.
Go get one from a glazier ..... setting block for commercial windows
aluminum block 2x4
spacers, stack strips of tire side wall. rubber cement them together... like strip, rubber cement, strip, rubber cement and repeat until its as big as you need
Get a 4" rubber spacer. Why make it more complicated than it needs .. .. ..
@@jiml4987 because the rubber spacers seems to be harder to find then just stacking strips of tire atm... Maybe try watching the video?
@ALL about GAMING Try accomplishing something in life than comedy. He used 3" inch rubber bushings not 4" dumb dumb.
@ALL about GAMING He tried gaming and sucked so he found it more profitable being a pedophile. Stay 💯 feet away from school zones.
@ALL about GAMING Can you speak without adding trans as a pronoun? Transtard, translate, transdumb, transracist. You win a virtual trophy, the greatest accomplishment of your life🏆
Hey brother you can use marine starboard for your spacer
Maybe, that boat board material
Have you thought about looking into utilizing universal rubber bump stops or rubber body blocks for you hood spacers?
I’ve looked at the time of the universal ones, and none of them fit right.
Is the fiberglass hood so heavy to be carried by 3 people?
Send me over the dimension info for your hood spacer and if can print you something.
Where did you get the cans and tail lights?
Midwest military parts
I can 3d print a spacer for you instead of a piece of wood lol
Rubber and done
Are your external lights 12V...or does it matter?
They be 12v now, hopefully shouldn’t matter because of the leds.
What brand and where did you buy your taillights?
😛😛😛😛😛❤❤❤🦾🦾🦴👍👍👍👍👍👍👍
You've probably got $3-4k in silly nuts and bolts in this build alone and that's not even the expensive stuff. Are you going to do a cost breakdown? Are you keeping or selling this one / the other one?
Yup I do, stainless and grade 8
🤣🤣
Wood spacer.......you just lost a subscriber. Jk