Part-2, all electric R/C Douglas A-20 Havoc, 1/12 scale, scratch built balsa and 3D Printed parts.
Vložit
- čas přidán 9. 09. 2024
- In this second video about my r/c A-20 Havoc, there is a closer look at most of the 3D Printed parts, starting with the engine cowls. Shortly after that, the wing is taken off, to have a look inside. The wiring is also looked at when an inoperable servo is discovered, which means a close up look at the custom wire conduits and access points that make threading servo wires through the complex aircraft much easier.