Restoration Abandoned Drill Press
Vložit
- čas přidán 14. 09. 2020
- 1963’s Drill Press Restoration
Hello. In today's video we will restore Drill press, Which was released in 1963 in the Soviet Union.
We found it at the landfill, we cleaned it, restored and changed some details.
If you like our work Don't forget to subscribe, comment and like.
----------------
In the next part of the video we will finish assembling
the drill press and will show you how it works.
Donation for new tools - PayPal: bzari1996@gmail.com
#Restoration #Drill #restore - Jak na to + styl
Поле чудес да и только и станки валяются и инструменты . Ходишь как за грибами. Захотел станок сверлильный нашел, захотел перфоратор.
😂потом на авито кинут. Биение пару соток😅 в идеале
Если взялся за дело доводит его до конца. В твоём случае станок должен был что либо просверлить. А тут как он был сломан таким и остался. Доделай его до работоспомобного состояния и будет тебе лайк
Ни движек не поставил ни кнопку обратно
Где происходит эта ерунда? В какой стране?
@@maratmustafin9806 рф
Перекупская схема, помыть покрасить и на авито за три цены. На директлоте такой же нс-12, без стола и двигателя, за 4500р продавался недавно.
Nice work. No lathe, no sandblaster, no reman parts. Just basic tools and hard work. Great job.
Excellent job resurrecting that old abandoned drill press. Now it can serve for another lifetime. Excellent!
I was looking for such a machine. And here he is!
Anyone else screaming BOLT THE VISE DOWN... or is that just me.
no
Maybe he wants ! A Temporary ! Fixture !?
That and screaming use some dam penetrating fluid. Disassembly would be much faster
Temporary? No room on the bench? Drill a couple of holes through the bench top, secure the vise to the top with two or three heavy bolts, washers and wing nuts. When you’re done, spin the wing nuts off, remove the bolts and store the vise. The holes in the bench could be used with dogs for planning or sanding...simple. No excuse for turning a vise into a weapon.
Me too!
I applaud the job you did especially with so few power tool, it a good restoration. However please bolt down your vise, it's a beautiful bit of kit and deserves a permanent place of honour.
Do you applaud the fact that the machine was painted ? is this called restoration? This is a good machine, if it is restored, it will be able to serve for a very long time and help in the work ! but after such a restoration it is not a machine but just a useless twister with a beating spindle and a non-working cartridge !!! In our country, for such work, THEY are FIRED immediately !!!!
Мне вот так у всех под кустом свирлика воляиться ? И покраска проста божественна!! Но самое главное где станина и мотор? Или он от вечного двигателя работает? И как прекрасно бить по болту с резьбой молотком. Если-бы мне поймали на преждней работе за таким то руки отрывали с совсем корними
Oh look! Under this tree! It's that drill press I put there 2 minutes ago! WHAT ARE THE CHANCES?????
the same with the angle grinder! what are gthe chances?
LMAO I thought I was the only one calling BS on these videos. "I mean, I was mindin me own binuss and what do I's find!?!" Every video and their not the only ones who do it. Seriously, we don't need some story for the hunk of crap ... we just want to watch it get restored lol.
@@0420Junket I like the people who say: "I picked this up for ten euros/dollars at a scrap yard" or "someone was cleaning out an old storage shed and find this in the back" or something like that. I do not believe "my videographer was filming me when I found this piece of industrial machinery lying by the side of the road."
@@Ambidexter143 lol exactly. “This person with the camera goes everywhere with me. When finding tools, going the store or even taking a dump ... their there .” Lmao
good, the chances are GOOD
Almost finished, nicely done!
That was a lot of work done on a tool I wish I had. Good Job!
You should have put the first one of those bearings that went on the top of the quill drive in first then inserted the second. That would have kept their spacing.
Mis felicitaciones por tan buena restauracion de este taladro de banco, gracias por este video y saludos desde Venezuela.
Досмотрел до момента когда убитый, рассыпавшийся подшипник начал собирать в шпиндель и сразу стало всё ясно, дальше смотреть не стоит,👎
Зато вал внутри шпинделя смазан толстым слоем солидола
Теперь я понимаю суть фразы: покрасить и выбросить
Согласен. Залипуха!
Ето рождение новой фразы: смазать подшипник и выбросить!
Можно еще: из говна пулю лепить! ;-)
BOM TRABALHO ,PARABENS AQUI DO BRASIL...
ahhhhh paint ! very good for grapes ..... bon appetit . healthy for human and animal.
Excellent restoration! Peace 💫
Not nice to be sarcastic Sandra . . .
J ONB unlike you I am not a hater.
Those grapes are going to taste funny after this spray job :-) (20min in)
Good restoration
Достойно.
Excellent Restoration!!!
👏👏👏👏👏👏👏
👌😁👌😁👌😁👌
👍😎👍😎👍😎👍
PARABENS NOTA 1000
Жаль станок. 🥺
Ничего не восстановлено, сделано как попало, цвет - говно. Зря потраченное время.
Да его просто изнасиловали)
Puppy checks out drill press and says, "Hold my vodka..."
Обязательно положи на тоже место где взял. Следующий тоже должен получить свои лайки.
Nice work
Так ждал что он его действительно восстановит. Но нет. Просто почистил и покрасил.
В следующем видео будет показано завершение восстановления и запуск в работу. Только когда это будет.
Сам положил, сам нашёл - зачем восстанавливать.
Пиздец, даже кожух не разогнул.
@@stell33.stell33 видно по многому, что станок там лежал лишь летом, в сухую погоду максимум пару месяцев.
Очень похож на советский станок нс 12!
31:12 now with added eccentricity, for 10% bigger holes. BUY NOW!
Very good restoration. You have demonstrated how much can be accomplished with hand tools and labor. Will the second part of the video include installing a motor? Good job!
Puppers is best assistant. :)
thanks, great job, the camera is very zoomed in, can you zoom out little bit to get part of the holistic view? thanks again
Hey great job mate , it is good to see the old gear being restored and looked after . Mate I have a question for you , can you tell me what those two extra belt pulley cogs on the side of the drill press are there for and what do they do as I have never seen that set-up on a drill press before . Also where does the electric motor go on the drill press . I hope this finds you doing another resto and I hope I am not bothering you with these questions .
Fantástico trabajó
Посадка под подшипник восле патрона прослаблена настолько, что обойма крутится.....
если бы он туда новый подшипник поставил то может она бы и не крутилась
@@TOP19809 там шариковый упорный подшипник стоит, его тяжело найти, автор решил не парится.
Да и посадки подшипников все стандартные, там конкретно просажен вал..
Рукожоп! Так испоганить добрый станок, который можно было бы привести в порядок. Сборка подшипников - шпинделя и втулки - в учебник ляпов при сборке. Браво!
Да, именно жаль станок. Попал не в те руки. 🥺
For the record, I've done this type of rebuild a few times. doing a BOISE CRANE 1800 at this time. Judging by some of the comments, I'm inclined to think this must be "open Sunday" in the lounge at the local sanitarium !! :)
Isso que é restauração
That was actually well preserved. It look that way when it came out of the Soviet factory brand new.
good
👌👌👌
My favorite part was the magic at the beginning when it was “found” with no chuck but one appeared a few seconds later while still in the grass
No chuck, then a chuck, then no chuck again.. lol
A chuck chuck here and a chuck chuck there, old....
I think some people have lost sight of the purpose of the video's it doesn't make ant differance how you come by the unit, as long as you have fun fixing and watching.
Nice 👌🏻
Super👌👌👌👌👌👌
Какой точности при сверлении достигли? 😂
Или сверлилка так, на всяк случай, чтоб было чем доску просверлить?
Hola...buen video...me parece que hay que agregarle musica de fondo....
Great restoration 👍
Painted grapes. Good taste.
0:41 magically a drill head appears
использование дрели, зажатой в тисках, выдает вас как русских людей)
Интересно, а он знает, что такое ГОЛОВКИ???
А также что тиски не прикручены к столу выдаёт школьников
It's thrown away not so long ago. Didn't rusted too much. No bolts unscrewing with acetylene torch. I think it's not even meets rain before you found it)
👍👍👍
Осталось найти основание и мотор со шкивом. И поменять сверлильный патрон - его кулачки изношены до предела.
и добавочно заменить подшипники на пиноли
Now don't you worry, spelling not important here.
И здать нахрен в лом!
патрон, в конце видео, офигеть как бьёт!!!
Так он ещё и бил по патрону железным молотком, прямо в район посадочного места, где конус 😖
Восстановление методом покраски)
I feel like i should donate just so this guy discovers a socket set.
Parece Nuevo !!!
Если загонять деталь молотком, то это не восстановление. Так, почистили слегка
Ацкей , проведите такую же работу и , возможно, измените свое мнение..
Удачная находка..
Добрый станочек!
Он его не нашёл, где положил, там и взял. Халтура, блин.
Great video, let's do a good job together, see you guys again
Hello friend Vietnam
Чего там ещё реставрировать?! Отличный станок,сразу тащил бы на барахолку-и так заберут...
Hubiese estado bien verlo en funcionamiento
like it alot but maby brighter colours
Good job, bro! I like restoration, too.
watch this ( playback speed ×2) superbly
The "find" ... so fake ....
These Asian dudes just find stuff in a field and by sheer coincidence a friend happens to be at hand to film it. They "find" lots of electronic equipment to. Mostly painted with mud
I think that was the point here
Everything is still greased, no seazed bolts whatsoever... there is no way this was stored outside.
Даже позавидовал -мне бы так ,пойти по маленькому в огород и найти станок ,не каждому так везет,а противовеса так ,случайно,нема было?
The pulley nut isn't fully engaged meaning the shaft isn't inserted correctly.
Вот это я понимаю, болгаркой зачистил и всё.
Wondering why you didn't straighten out the belt guard before you Painted it and put it back together
No way those bolts would have come out as easy as that
Which part of the process is your favorite; the disassembly, the part cleaning or the reassembly?
I'm not sure that this was an "actual find". But I do know that the puppy was a cutie. Did it work after all that restoration ? I didn't see the on / off switch replaced with the wiring.
я в училище собирал такие станки токаря делали детали а мы собирали 10 станков в месяц должен собрать )))))))))))
Less hammer, more brain , in next time, this will make your job more beautiful
lets see if I got this right....you used a spaner wrench to put it back together but not to take it apart?
Ех мені б хоча б такий.
It would take me a month to put it back together.
Мне интересно после таких манипуляций с губками патрона он без закуси начал работать
Nice. Now drag it back to the woods..
Not impressed . The main shaft looked buckled when it was spun towards the end of the video and who in their right mind would re-use old worn woodruff keys and that old chuck. Filing new gear teeth on that massively abused chuck was the point where I lost faith in the restoration and couldn’t take it serious any longer. Why is it these “restorers” believe that the more metal you remove , the closer to manufacturing tolerance the part becomes???
Ладно! И так сойдет!!!
Точить напильником литье станины... что за слесарь- интелигент?
Тиски на верстаке закрепи! Рукожоп.
Та это жесть, и шпонку молотком забивать. Штифты подмоторной плиты вставил не той стороной. Цвет говно,. В общем работа через жопу. Жаль станок. 😒
Радиально упорные подшипники собираются не запресовыванием а внутренняя обойма вставляется под углом к наружней и с проворотом. Для шлицевых гаек существует специальный ключ а не пробойник.
did you make the second video?
Connect a motor and lets see it working!
You found that stored in an old she'd or something, no way it was in the weather and dirt for more than a week.
It was basically cleaned
At least the shaft turns and the quill moves. I'd love to see the runout measurements though. :/
It does look really poor... I wouldn't use it like that
Should have been changed the bearings. And the chuck
Agreed
The chuck is way obsolete. A keyless chuck would have been better. Good keyless chucks are not cheap.
@@firesurfer keyed chuck > keyless chuck
Патрон зачем старый оставил? Где мотор, плита,ремни , стружка?
Lots of parts. I hope you took a video when you took it apart. Oh wait. Never mind.
Возьми себе за правило, все трущиеся детали смазывать при разборке и сборке. Применяй ВД шку или другую Смазку глубокого проникновения.
Where is the motor no clue how well it really works.
Yes, I don’t buy the ‘find’. There is virtually no corrosion and everything is so well lubricated it comes apart with ease and no heat. The chuck and arbor were not there at the ‘find’ then they are mysteriously in the quill, then they disappear again before re-emerging. Would have liked to see a minimal protective coating or lubrication on mating and sliding surfaces during re-assembly. But still fascinating enough to watch to the end. Thanks for posting.
Hello, in today's video we will restore a drill press that I bought at a yard sale and clumsily threw in some bushes and covered up with a couple of sticks.......
Too many adverts made this a pain to watch. Also, I think that the chuck is way too far gone to re-use.