Chrysler 300C trunk build - Zapco, Audible Physics, Gladen, Mosconi, Phoenix Gold
Vložit
- čas přidán 5. 09. 2024
- Kit used:
DSP: ZAPCO Z8-IV II
Amps: Mosconi AS300.2, AS100.4, Gladen 3k monoblock
Speakers: Gladen Aerospace midbass and tweeters, Audible Physics RG100 widebands
Subs: Phoenix Gold Ti Elite 12"s
Varta AGM OEM battery + Ucharge lithium
Phoenix Gold DD10 distribution
More info:
/ pssounduk
/ zapcouk
/ audiblephysicsuk
To me the exciting part is getting to see the build, not just the finished product !
Same here. I love the final products but the behind the scenes stuff is what I enjoy watching the most. Love the mix of old and new gear! Great work sir!
This is the best car audio channel on the Tube. Beautiful solid real world system.
Designing each piece to integrate into a whole trunk build that is serviceable is always what is so impressive to me, aside from the sound and final appearance.. amazing work as always Peter 💪✅
Up To Bat Entertainment Thank you! 🙏
The depth of your creativity is impressive. Very nice.
Beautiful work!
So many things that are unique on this one Peter. I bet you have gave a LOT of installers and DIY guys a few new ideas.....like the using the black Plexi (Perspex....I looked it up...they are the same...lol) as a mirror to show off the cones!
I sure hope most pick up on thing here, SAFETY!
I've seen first hand how installs can become projectiles during an accident. It's painful, sad, and then even worse comes the lawsuits if someone installed it incorrectly. Even if it was a friend in the driveway. It happened in Atlanta back in 1993 with 2 high school guys installed a box in a hatch. It rolled over and killed the driver......just awful.
It really doesn't take much longer and even makes for a stronger install that looks and last longer too.
Thanks Peter for highlighting this in your install when most only want to show the glam.
Justin Exactly, safety is always number 1 on the list! Also, the more solid the build, the better! Less resonance, less rattle!
@@pssound9749 I've been meaning to ask you about this. I've seen installs where the box and amp rack are eventually integrated with the vehicle itself like yours or I have tried to isolate the sub enclosure from any metal. It's either installed in a floating method or semi isolated with rubber feet or sand underneath.
Honestly I do agree how do you build yours. You had mass and mass doesn't want to move resonate..
It never gets old seeing the absence of MDF!
Justin Due to the fact that the box has to be mounted secure, it’s pretty impossible to isolate it!
Really interesting seeing different methods of keeping panels secure. I'll be keeping that swivel catch idea just incase :)
Really cool seeing Phoenix Gold equipment still around and being used :)
This looks just like the back of my dodge magnum , I squeezed 4 hcca 15.4 in behind the rear seat in custom made fiberglass enclosure, took me 6 months too make .Great videos you do good work
charlie francis Indeed, Magnum is the same platform.
Solid work Peter. Looking forward to the completion.
Another great video!! Enjoy you breaking down the steps and vision of your installs.
Another cracking video from pssound ! cant wait to see the finished product !
Again nice video from you, thank you for all sharing of your work! Cant wait to see it finished!
Great build and great video....😎
Lee Drakeley Thank you! 🙏
Looks good!! Giving me ideas for my upcoming build in my 300C
it's an inbox sub. it's in a case. put it in a box with a deep wide port. you will get way deeper base
Amazing craftsmanship and equipment. Bravo! I didn’t know those Phoenix Gold subs were so capable and special. 👍🏼👍🏼
Pg has a history of making cool things then discontinuing them
Very Nice Peter
It’s looking good Pit
I new it , keep up the good work man
Excellent!✌👏
Amazing work guys!
Freakin amazing!!!!! 😎
I’d love to hear this system those subs do seem rare but I’m from California 😅 have you metered it? I’m curious how much power those subs can take
How do you wire two subs together? I think if you have multiple subs you should always wire them in parallel because otherwise they will have different phases and will not be exactly synchronized
Karan Kasraei parallel or series or combination of both...doesn’t matter at all. What you think and what happens in reality are 2 different things.
@@pssound9749 of course you are right, my point is totally from an electronic perspective that is bothering me, because two reactive elements(subs in this case) wired in series will have different phases when a signal passes through them
Peter I heard u saying how low these subs can dig. What did u think of the sub you had up front in ur car? The Mille Legend subwoofer. Did it perform well? How much power do they need to give good output? And finally, Would u actually run two of them (10’s) in the rear?
Which Phoenix Gold subwoofers are thise
Phoenix Gold Ti12d Elite
how do you rate the mosconi amps against genesis series 3 or zapco? intrested to hear your opinion!
Where the heck did you ground in the trunk, I have the same car and have a whiny noise cuz I can’t find a good ground.
I also can’t find the frame can someone help
It has a factory ground point at the back where the OEM battery is also connected to, unless yours is different?🤷🏻♂️
@@pssound9749 I did see that, I just thought it wasn’t the best grounding point so I ran another long ground from alt case to my lithium. Thanks for the reply!
Very nice job but we like to watch the wood working please
Sa'ed Rayan one day i’ll get there! Do you follow Mark at CAF?
Pssound yes I do follow him he is genius
Sa'ed Rayan it takes long time to get to the point when you can just create videos freely. I’m miles away from that and it’s already difficult to fit in creating all the content i do between the daily life and stress i have.
Pssound wish you more success dear
I wonder if Stereo Integrity could keep up with those subs?
🤷🏻♂️🤷🏻♂️
Did you do a big 3 upgrade? If so how did you do it with the battery being in the boot
Chef D The factory run is 1/0, which is more than enough. We only upgraded the earth in the trunk.
@@pssound9749 thanks a lot.
Hi was wondering how good is the zapco amps i am getting one for purchase 10000k for 1500 any insight is good thank you
shazz g It depends on what Zapco amp, in what state and from what seller if it’s second hand! Otherwise it has always been one of the best brands in the field of sound quality.
@@pssound9749 zapco spl 10k amp ols school one i am from new York area
And also a 200.4 zapco amp he has to sell with this one both old school amps they are in proper working order for 2100 for the 2 do u think its a good buy sir
shazz g I honestly can not give an Amen on this! No pictures, no proof of functionality...pass. 🤷🏻♂️
I use lots of Zapcos for very good reasons, but those are brand new.
How is that a Chrysler 300C, when it has a hatch? 300's are a sedan, with a separate trunk. Not knocking on the build, looks very nice, but that is not a 300. it has to be either a 200 ( maybe fat fingered the 3?) or a Dodge Magnum
crazyjr Haha, you think i’m stupid and i’d call the car something else? 😂
Google it, you’ll see that it’s available in Europe. 👌🤘
Please go and look here, full build in pictures plus on page 2 pictures of the 300C. Chrysler for the European market do a 300c Estate/Tourer, similar as the Dodge Tourer. I am very happy with my Chrysler 300c www.flickr.com/photos/team_mib/albums/72157707958969184/page1
Looks like a dodge magnum
MOPAR 300 yes; this is the European version, totally the same platform.
Pssound awesome work bro
Less talky talk more building and doing
B_12 yes Sir, i put it on the wish list! 👌
@@pssound9749 lol thank you. Just saying you over explain and I get bored.
B_12 maybe I missed something but did anyone force you to watch, time to grow up from comics and read proper books.
@@Adrimo911 yes you definitely missed something. And are you stupid? This is a video not a book. Dont want comments disable them.
@@PhuckenTacoz comments are good, not all are good but it just shows your level.
L