Amazing Way to Finish the Surface of Discolored Pipe TIG Welding
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
Vložit
- čas přidán 30. 03. 2024
- For information on welders and peripheral devices, please contact the manufacturer to receive a more accurate answer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
How do we finish welding glossy pipes such as sanitary pipes?
Wire brushing, polishing, acid treatment, electropolishing, etc...
Among them, wire brush is a commonly used method.
Although this is a very convenient method, it has the disadvantage of leaving many scratches on the surface of the polished pipe.
In this case, a very nice finish can be achieved by requesting an electropolishing company.
However, it costs a lot of money and takes a lot of time.
In that case, it would be a good choice to try using an electrolytic polisher that can be used on your own.
Of course, you may need some study to operate the machine.
I will introduce those as well later.
Thank you for watching and have a great week.
#sanitary
#tube
#electropolishing
#TIG
#welding
#factory
#machine
#steel
#crafts
#tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#HAGOJIBI
#video
#weldingmachine
#tigwelder
여러분 안녕하세요.
위생배관 같은 광택파이프를 용접한후에는 어떻게 마무리 할까요?
와이어 브러쉬, 폴리싱, 산처리, 전해연마 등등...
그중에서도 와이어 브러쉬는 흔히 사용되는 방법입니다.
아주 편리한 방법이지만 광택처리된 파이프의 표면에 많은 스크래치를 남긴다는 단점이 있습니다.
이런 경우 전해연마 업체에 의뢰하면 아주 멋진 마무리가 가능합니다.
하지만 많은 비용과 많은 시간이 소모됩니다.
그럴때에는 셀프로 작업할수있는 전해연마기를 사용해보는 것도 좋은 선택이 될겁니다.
물론 기계를 다루기 위해서는 약간의 공부가 필요할수도 있습니다.
그런것들도 차후에 소개시켜드리도록 하겠습니다.
시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요.
용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다.
↓↓↓↓↓↓↓
korea@nswel.com
내쇼날시스템 대표전화
051-941-9701~2
Magnífico tutorial maestro, buenas formas de limpieza,la amoladora sale mas económica, gracias por compartir tanta información,un cordial saludo y por supuesto un merecido like desde Narón (Galicia)👍🤓😜
Great job Welder Jin.
Bom dia parabéns perfeito
Fantastic job!
EXCELENTE VIDEO¡¡... ...SALUDOS DESDE MEXICO¡¡
Аппарат понравился 🔥огонь
You always amaze me 🙏
спасибо
👍
❤
Dommage que cette machine à passiver pour un amateur est très chère.
Merci
What you used in last for scratch removing!?
you can rotate backward, especially when you don't use filler rod
Bonjour où se procurer les pinceaux ?
Could you please tell me why welding often has dirty residue on the rough surface even after cleaning each layer? I hope you can answer, thank you.
your welds your talking about is probably stick..... a small chance it could be mig because mig is still pretty dirty... but sounds like it was not cleaned properly... tig welding is clean only thing you ever would need to clean on a tig weld is color if that how your place works. if theres holes in your tig welding you have porosity in the weld if you have residue on the surface from tig your doing something you shouldnt do
This video got me thinking. Well done!
м😅молодец
답답하네 자막이라도 넣든지
get a bigger cup and more gas.. better gas coverage will make it not look burnt the whole weld should have that shiny ness that you have at your stop because you are getting good gas coverage because you stopped moving at the end like serious get a bigger cup id run a jazzy size 10 with a diffuser and run like 27 ish cfm of gas and the weld would look not burnt like 100000000 times better then the crusty walk you have. you are burning the Chromium out of your stainless. but you would turn that weld i rate as a 6/10 because it burnt as fuck in to a 9/10 with a bigger cup/ diffuser running more gas
Зачем этот аргон нужен если лазер лучше?
Аргон более доступный. В России всего 3 официальных места, где есть лазер. По крайней мере, мне так наставник объяснил.